I ruined my Bogart Racing Wheels racing wheels already :( Cammed Silverado not happy
Вставка
- Опубліковано 15 жов 2024
- Instagram: LSX_Panda
TikTok: LSX_Panda
Business Inquiries: siskbuilt@gmail.com
Engine
6.0 370 ci Iron Block, Weisco Pistons -3cc dish, Eagle rods 6.125.
-ARP hardware throughout
-Studded heads
-Comp Cam -235/243 .621/.624 113
-SKU 54-460-11 (Grind Number 285LR HR-13)
Tuned by DSM Lights Dyno Tuned with HP tuners
-Speed engineering 1-3/4 Longtube
-799 heads
-90mm TB with x link
-TBSS intake manifold
-2006+ radiator with e fans
-Mighty Mouse Mild Catch Can
-LS6 ported Oil Pump
-Full speed engineering dual 3” exhaust
-Flex Fuel Sensor to support e85 or 93
-220 Amp Alternator
Transmission
-Level 5 4L80e RPM Transmission
-40k Trucool Cooler
-3800-4000 triple disk converter by Circle D
-Speed engineering drive shaft safety loop
-upgraded Yoke and conversion u joints
-Speed Engineering cross member
Rear
-3.90 gear ratio
-Eaton trutrac
Brakes
2020+ Front Caliper and Rotors
15" Conversion Rear Brakes
Suspension:
Belltech 4"/6" lowering kit
Springs and spindles for the front
C-Notch Flip Kit for the rear
Man that one nice truck keep up the great work. But just wondering what are the spec on wheels like size and front and back and also backspacing
Offsets I can’t help with, I just have the measurement to Bogart for the front and they made them. The rears are off the shelf. Fronts are 20x7 and rears are 15x10!
Truck looks sick on the bogart bro!!! I run accel spark plug wires on all my LS stuff with the ceramic angled boot. Never had any heat issues and they perform flawlessly... they are 120 for a set but will last forever.
I got new wires! They seem to fit so much better! Ran those old ones for way to long 😂
if you haven't already repaint the calipers and see if any paint rubs off
That’s whT I did! I painted them and moved it all by hand first before I drove it!
Just curious where does your exhaust stop at? Wanting to know so I have an idea for mine
Stopped over the axle!
You used the 1320 15in wheel brake parts and still need to grind caliper?
Yeah, from what I’m finding the wheels are made a certain way and needed to be grinder down. I put a 15” race star on and it clears with no issues
@@SiskBuilt I just put my bogarts on today n I have the same issue
@@boosted_sierra4264 gotta grind them down! Hit the edges. Tape the barrel. Put them on, if the hit, grind more. If the dont. Install, then move the caliper since it’s a “floating” one. And make sure it doesn’t hit!
@@SiskBuilt ya bro been at it with the grinder and using a 1/4" spacer so hopefully no issues after
@@boosted_sierra4264 I didn’t use a spacer, but I grinder down a lot!
A buddy of mine got Mickeys and a day after of putting them on his girlfriend busted them and cracked the rim
No good!
Do your homework next time.
Learn as you go
😀 "Promo sm"!!!
Hi 👋 Cody 🌞 Sisk Already Take 🤳 Selfie 🖨 Pictures With My Toyota 🛻 Tundra On Saturday 📅 December 3rd, 2022 In Pharr, Texas.