[Mod Guide] Nerf Stryfe Select Fire Kit Tutorial
Вставка
- Опубліковано 8 вер 2024
- Thank you so much for watching! Hope this tutorial helps. Please Subscribe / naptownnerf Keep Reading...
My Patreon: / naptownnerf
My Instagram: / naptownnerf
My Facebook page: / naptownnerfmods
My Twitter [NEW Please Follow]: / naptownnerf
_____
This installation went very smooth and was much easier than I expected. I hope this tutorial helps you install your own Stryfe select fire kit. If you have any questions definitely feel free to leave them in the comment section below and I'll try to answer them to the best my ability. I really think the hardest thing to figure out was the placement of the voltage regulator but does fit very nicely in the grip. I can't wait to get this out onto the field and put it through its paces but as of now I'm very happy with this kit. I'm sure I'll be purchasing another. Hope you enjoyed the mod guide.
Second instal didn't go as smooth. Troubleshooting help here: • [NERF MOD] Modified Se...
[BUY HERE]
Stryfe Select Fire Kit: www.lightake.co...
Translucent Blue Stryfe Parts: www.etsy.com/l...
[TOOLS]
Side Cutters: www.amazon.com...
#0 screwdriver set: www.amazon.com...
Needle Nose Pliers: www.amazon.com...
Soldering Iron: www.amazon.com...
X-Acto knife: www.amazon.com...
Wire Strippers: www.amazon.com...
Sand Paper: www.amazon.com...
Solder: www.amazon.com...
DIRECTIONS: (Click here and scroll down): item.taobao.co...
![[Nerf Mod] SUB-ZERO (Select Fire Kriss Vector Stryfe Mod)](http://i.ytimg.com/vi/arWb80_difU/mqdefault.jpg)
Hi Naptown Nerf, thank you so much for providing this tutorial as per promised. Even though I have just skimmed through it, I will definitely be looking through your tutorial and I can finally purchase my select fire kit!!! I have delayed purchasing this kit for at least a year now as there were not enough support and step-by-step tutorial on youtube to follow. I sincerely thank you for this video!!!
No prob man.
Orderd mine a couple days ago ( to Canada) most likely won't see it for a month or so . But I enjoyed the guild . I will be re-watching after I get my kit . Keep up the good work man !
Thanks. I just ordered a second one also.
Very informative video. I wish it had been available a few weeks ago when I had installed my kit, it would have made things a little easier. I ended up using a smaller switch (10amp DB2 cherry micro) to allow the modulator to be placed where they originally located it. Im only running a 2S so I'm not worried about frying it.
I had a few issues with stripping out the heads on the self-tapping screws, so I would definitely make sure you're using an appropriately sized screwdriver for that part. All in all, a great resource for installing this awesome kit.
Thanks. Yes I'm using the correct size screwdriver is very important probably should've stated that more clearly.
Naptown Nerf every time I go to hvz I see you
dude! please make more of these type of vids I'm new to modding and this is super helpful!
Also, how durable is this kit? Is it still operational?
Did you wire the normal stuff first and then the kit or vice versa? Also, is that shell already painted?
I have the version 3 select fire kit with the 3 mode selector switch installed. Today, after a year of ownership, I turned it on and a red button is continuously blinking!!
the link doesnt seem to work anyomore
Hey, one of your links takes me to a purple mattress site...
Have the same kit but the gear slips, 3D printing tolerances a bit off.
Try tightening the gear with the Allen key included.
May I ask when can we see the BSP green stryfe parts in a build?
I'm hoping to get to this before Endwar, but it will depend if I can find the perfect hydro dip film for this build, that's kinda what been delaying this project.
Naptown Nerf ok, can't wait to see what your plan is in the future. I like green a lot lol.
cool
Yay you said taobao correct
Links are in the description. You can get this off of Taobao, Lightake or NFstrike.
Thx
Is running it on a 2s a problem?
Do you take commissions?
I tried installing mine but it won't do any of the modes. It is, instead, stuck on doing a 7 rotation burst for each trigger pull. Do you know of any way I can fix it?
Take off the lever for the select fire switch and make sure the line on the noob of the controller is pointed diagonally, like 10 o'clock. Them put 3d printed lever back on level, as it would be in single fire mode. It shows this in the directions, link in the description. I wish I would have said this in the video but mine was already in the correct position and forgot about that step.
+Naptown Nerf Alright, I'll try that. Thank-you!
Love your videos naptown Nerf third comment
Thanks
Why when I looked at the thumbnail a saw bon from the Walten files
God damnit I need a solderless one
First
8th