I am planning to get a 21' X 54 sidewall pool. Holds 10,620 gallons per the chart. Please let me know what Filter this is and if it would work for my pool. I also have a 1.5 variable speed Hayward pump with 1.5 plumbing. I want a filter big enough so I won't be cleaning the thing every single day as my previous tiny thing did.
I use our pressure washer to clean thes3 cartridges. Top to bottom always... Just got a new pool with this same filter, so I had to watch how to remove / replace, and also have the chlorination system that goes with it.
I can’t open it to get the filter out 😅 idk if it was because it had water when I tried or it’s just sunburned and old and stuck also the lock handles have been broken off by previous house owner ig
This has worked great all summer. My first summer with this system. Today when I did this after about 20 min. the top of the cartridge started loudly rattling against the lid. Tried everything and its still rattling loudly with pump on high, no rattle when pump on low. any help?? thanks
I had the same issue. Here is a quick fix. Take some heavy duty gorilla tape and wrap the top of the inside of the filter housing/top where the cartridge slides around. Wrap it about 4 times. It will stop your noise. I have read that Hayward knows about this defect & is offering a gasket that stops the noise. I have reached out to Hayward numerous times on their web site & they have not even replied. I also stopped in at Great Escape where I purchased the SW150 Filter/Pump and showed them a video & they had not heard about this issue nor about a gasket to fix this issue. They did suggest that you could turn the filter upside down & that might stop the rattle. My guess is the filter cover shaft where the filter slides in is to big causing the very loud rattling noise. Not happy with the Hayward Corporation at all. Good luck!
Straight to the point video. Didn’t take 30 mins for this. Thank you very much ✅🫡
Super helpful! I thought I was gonna have to go to college to figure this out. Thank you so much.
Best video on cartridge cleaning I've ever seen!!!
Awesome great detail simple instruction awesome job thank you so much God bless
Thank you so much for this video! Helped me tremendously
Well thank you sir , I've never had a cartridge system before and recently I have bought a home with this set up and no instructions
What do you clean it with? a hose? a brush?
LOL! 1:50. The look we all give when that damn ring doesn’t fit tight. Great system though! 👍
LOL
Thank you, it was very helpful
Thank you so much for this great demonstration. This was very very helpful
Thank you
Shawn Wyatt I cleaned it today and it was like new again
Thank you
I am planning to get a 21' X 54 sidewall pool. Holds 10,620 gallons per the chart. Please let me know what Filter this is and if it would work for my pool. I also have a 1.5 variable speed Hayward pump with 1.5 plumbing. I want a filter big enough so I won't be cleaning the thing every single day as my previous tiny thing did.
how to change the gage on this type? of tank ?
Do you have a video on how to set up the filter?
I use our pressure washer to clean thes3 cartridges. Top to bottom always... Just got a new pool with this same filter, so I had to watch how to remove / replace, and also have the chlorination system that goes with it.
Very helpful video!
Which make & model filter is that? I'd love this for my Pool
Well done video!
Love it!! I just did it and feel proud of myself😂😂😂!!
Is is thin leu of “backwashing” your filter?
How u connect the filter housing to the pump
What's the model of the filter in the video? Size of filter?
Wouldn’t you let the filter fill and spray out water before closing the bleeder valve and starting the pump?
THANK YOU!
Thank you for watching!
how do you backwash this system? Need to know how to backwash.
The motor runs on mine but its not pumbing water. I heard a snap sound near the impeller.
ANY IDEAS WHAT TO DO IN THIS SITUATION???
what is the name of this tank?
I can’t open it to get the filter out 😅 idk if it was because it had water when I tried or it’s just sunburned and old and stuck also the lock handles have been broken off by previous house owner ig
Hello,what type of pump is that the Hayward ?
Thanks so much for the video
Thank you for watching
Great video but after I take that ring off the top won’t come off
Do you have any tips on getting it unstuck??? I can't get the black ring off to change the filter.
I’m having same problem!!
Yes! And it freaking hurts my hands when I do eventually get it.
We’re you able to get it off I can’t
Same thing is junk there noone that can open thus black ring around this it’s crazy
How often?
I have a hard time putting it all back together without it leaking. Such a pain in ass. Is it because gasket needs to be replaced? It’s 14 years old.
can you make a video on backwash with this setup I don't have a backwash feature or lever on my pool
If you have a cartridge filter, you do not backwash.
Nice, simple, clear and concise video. Thank you for this.
Thank you for watching
Thank you
I put on rubber gloves with padding in them. I needed to slap the top part of the filter to get it off.
This has worked great all summer. My first summer with this system. Today when I did this after about 20 min. the top of the cartridge started loudly rattling against the lid. Tried everything and its still rattling loudly with pump on high, no rattle when pump on low. any help?? thanks
Thank you
Thank you
I had the same issue. Here is a quick fix. Take some heavy duty gorilla tape and wrap the top of the inside of the filter housing/top where the cartridge slides around. Wrap it about 4 times. It will stop your noise. I have read that Hayward knows about this defect & is offering a gasket that stops the noise. I have reached out to Hayward numerous times on their web site & they have not even replied. I also stopped in at Great Escape where I purchased the SW150 Filter/Pump and showed them a video & they had not heard about this issue nor about a gasket to fix this issue. They did suggest that you could turn the filter upside down & that might stop the rattle. My guess is the filter cover shaft where the filter slides in is to big causing the very loud rattling noise. Not happy with the Hayward Corporation at all. Good luck!
Good video but you have electrical cord and water on the floor, you could be electrocuted.. safety first
Why can't I remove the ring from the tank? I always have a problem loosening it too
I’m having that same issue right now. Idk if it’s stuck from the sun and to add the lock handles broke so idk if it’s locked or stuck
Any one noticed he unplugged and plugged the pump while standing in water? : P
Statimtek hahahahaha!!
Came here to say "how did this guy not light himself up standing in that water with those wet cords & plugs!"
Made me shudder, looking at that!
Yes. Yes I did. Thank God he didn’t get shocked like Marvin from Home Alone 2
Thank you 😊 😅😊😅😊
You're welcome, thanks for watching!
buy 2 extra filter and rotate because cleaning it is not 30 mins
I don't quite understand why anyone would use these. Sandfilters require no manual cleaning, more or less. Yes they do waste some water.
What model is that filter?
Looked like a Waterway....but I'm looking that up too.
it's a Waterway ClearWater Cartridge. They this series in various sizes. One thing I'm adding to my new set up is the Waterco Cyclone pre-filter.
@@sarahmangone7785 Thanks for that's information🙂
Cops on their way to arrest him for the greatest explanation ever!