How to use a range extender as an access point

How to setup Access Point Mode on the TP-Link TL-WA850RE. The video shows step-by-step how to set up the TPLink range extender as an access point. This way uses a cable to connect, so the internet connection is more stable.
NETGEAR WiFi 6 Router amzn.to/3Ov8X3S
Subscribe now because it's free / netvn82
#netvn #tplink #tplinkrepeater

[@The_G]

Thanks for this tutorial - exactly what I needed and worked first time - much appreciated

[@andrzejs5938]

Thanks for that tutorial ! It works !

[@user-to1nx7yb8r]

Great help indeed. Thanks a lot.

[@Chris-lo3lh]

Thanks, it worked for me first time. Took less than 5 minutes. Big help, thanks

[@NETVN82]

Thanks

[@antoh07]

Very clear and easy to follow - thank you :)

[@NETVN82]

Glad it was helpful!

[@amanjhashc.1178]

Exactly what i need

[@dcpabon96]

WORK PERFETLY! THANK YOU

[@przemo34256]

Thx a lot, rly helpful, exactly what I needed

[@NETVN82]

Glad it helped

[@jalalbadushah5077]

Thanks budy

[@housedr.jupiter4869]

why yours tp-link settings meniu look different when mine, we both have same extenders? I still using that 20 years old GUI.

[@mahesh9897]

Thank you so much bro

[@abhawe123]

thank you

[@chinmay6170]

bro do this mode offers you as a router? like if you don't have a router at home then can you use this extender via lan cable to make is as a router?

[@federicocristofori1257]

Requires hardware version 2 or higher.

[@alejandrorodriguuez1350]

Good explanation. Question: When configuring it as Access Point, do you have the same modem speed? That is, if I have contracted 100 MB, does the Access Point with WiFi provide me with the same 100 MB?

[@cemo7454]

Thank you my darling🎉

[@unaismohammed8046]

Thanks 👍👍❤❤

[@geekwizardnz1865]

Why do you have no 5GHz on the top-link website. Is it because you have a modem that doesn’t support 5GHz? Thinking of buying one

[@mohammadsadiq9876]

Thanks Brother

[@ck.campos]

Thanks!

[@NETVN82]

Welcome!

[@Danzo285]

THANKS

[@kanishkmonty1087]

I connected still not working disabled dhcp enalbled it reseted it 3 times still no luck I connected the Ethernet port from the WiFi to the tp link is that what we have to do right? And even before it was wireless so why wire to wireless is it?

[@ngari117]

Wait do i need to connect the range extendor to the wifi router using a cable?

[@chrmantilla]

If the main router has WiFi, Is it necessary to turn WiFi off? I use the extender as repeater but losses almost 50% of speed....so im trying the AP mode

[@DiversionsInMath]

It loses 50% of speed because it can't use duplex. It says it in the manual. All "Range Extenders" are like this. They are crappy products. Buy a proper access point (which this thing could be buy they inexplocably included an ethernet port that can't be used to wire it to a router)

[@alvarezz09]

so the access point needs to be a different name than the router wifi?

[@farisaiman5683]

I setup my RE into Access Point mode. But when i plugged in the Ethernet cable into the device, the internet status is unknown? How do i fix that?

[@mauriciocogo79]

Try to disable DHCP

[@kanishkmonty1087]

@@mauriciocogo79 how?

[@HeikoGenti96]

same problem here! how to fix?

[@mchiorato]

what firmware is it ?

[@muhammadmujtaba5593]

Bro same procedure adopted but no internet with using Tp-Link RE650 as access point

[@muhamadirham3754]

can range extender provide dhcp?

[@anhtutran691]

It’s no internet when i change back to wireless mode. Can you pls help

[@sricharansureshkumar1471]

did everything the same as you. but the last step still shows internet disconnected for me. been trying same, still no solution. as advice as on what should be done??

[@vinaaustria7281]

Same

[@bilgehankaynar4069]

Did you fix it?

[@jatinduggal1975]

I want to extend my wireless range to wireless again.... I did all the setup... But status says internet status unknown.... This is written in the first step on tp link web page.... Although i can access that internet fine when i connect direct to router.... Why is this happening

[@Zafran-e-Adab]

i do the same process its connected but internet is still not working

[@NETVN82]

you reset factory default and do again

[@johnhoward2100]

very irritating with no sound...

[@DiversionsInMath]

It says in the manual that the ethernet port can't be used to connect to a router. So how does it connect to the router in "access point mode"?

[@M_Adamson13]

It connects to an Ethernet port in the wall

[@maxtomlinson6822]

I have set mine up in access point mode with ethernet from my roiter. My router is at 200mbps download but when I connect the the TP-Link TL-WA850RE extender I only get 37 mbps

[@M_Adamson13]

Unique Ponde bruh it turns wired connection into a hotspot that’s what Ethernet is that’s how acces point mode works so are you stupid

[@oldfootage]

The only one who is stupid is the customer who bought TP-LINK range extender. Logic 101: Why do you need a range extender? Main wireless router signal does not reach. You buy this range extender and duh! The place you install it shows a red light which indicates too far. What were you thinking? So you buy a 100 foot CAT5 cable to connect to the router. Good luck trying to figure out how to connect a router port to this TP-LINK extender via CAT5 cable to make it an Access Point and get it all to work. Some genius made this video and voila. It all works wireless. Wonderful! Only why do I need an extender or access point to connect to the original source wireless when I can just connect directly to the original source wireless?

[@M_Adamson13]

Jack T. Umm it means like if you have Ethernet Ports on your wall like wired into your house and that comment was hella confusing

[@GuyPred]

If I stay on default mode (Range extender) but I connect RJ45 cable from my main router this extender, does it cancel all this procedure ?

[@marwanal-ali3041]

No u have to reset it first, so it can transform to AP mode. However once u plug the cable from ur main router it will automatically turn to AP mode ..

[@beresadam479]

in acces point mode how can i set it to be the same as the router password and SSID? it is annoying enough to have two WIFI names. In extender mode it is possible to have the same two WIFI names and if I search for WIFI on one device then only 1 SSID is listed. this is what i want to set in acces point mode.

[@purnomopadma6268]

its same my question

[@beresadam479]

@@purnomopadma6268 thx

[@najiiklove]

Have you been able to solve this?

[@beresadam479]

yes, it has a separate name and a separate password. however, the main router should be set to the DHCP server ON and the acces point should be set to OFF. so they do not interfere with each other's radio waves. but when setting up when we can choose between extender or acces point this is automatically set by the device.

[@Rose_wu27]

I can not go in the 192 link 😭

[@islamnasr482]

i cant find mode button can u help me ??

[@fernandoferraz2057]

Same. Did you find it?

[@-pp-]

You need to login with browser not app

[@nahimkhan3989]

No need cable connection to from router to extandar

[@jonathanpomanti7250]

My wifi don't work (i sue tl-wa855re)

[@barsik1923]

thank you