$139.99 Unmatched Speed & Performance: The New Durafly MFX Racer PNP
Вставка
- Опубліковано 27 сер 2024
- @RCPlaneReviewer
@stuartwarnerc
@HobbyKingOfficial
GET THE MFX HERE, EXCLUSIVELY AT HOBBYKING.COM:
hobbyking.com/...
After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.
With a minimal part count and assembly time, the MFX Racer simply clips and screws together in less time than it takes to charge a battery. The MFX Racer on its 4S setup is fast, but it still feels exceptionally stable and gives the pilot that locked-in feel. Yet unlike most speed machines, it also has exceptionally good slow-speed handling. With its 4-channel control, the MFX Racer is also very aerobatic, with big loops, fast rolls, knife edge, snaps, and spins, the MFX Racer can do them all and more, its only limit is you the pilot! The MFX has 2 wingtip options (both are supplied in the box), a standard 815mm option, or the 715mm clipped wing option. The standard wing setup gives a much better climb rate, whilst the clipped wing setup dramatically increases the roll rate.
Being "Plug N Fly" it is supplied with the following pre-installed components, a 2212-2200KV brushless outrunner motor, Aerostar G2 30A ESC, 2 x 8g MG servos, and 2 x 5g MG servos. Also supplied are a 5x5 prop, spinner, linkages, screws, and a decal sheet with race numbers, etc.
The MFX Racer is a small model with an exceptional pedigree, it flies with incredible precision and has loads of control authority for exceptional aerobatics. The MFX Racer is an excellent fun model that also has a great turn of speed, it will excite and put a big smile on the face of the pilot and spectators alike!
Features:
• Supplied "Plug N Fly" with motor, ESC, and metal-geared servos
• Minimal parts count means it offers a fast build time
• Its EFX pedigree means it is fast and agile
• Has excellent low-speed handling for smooth, safe, landings
• Suitable for intermediate, and experienced pilots
• Manufactured in tough, lightweight, EPO foam
• Includes a colorful decal sheet including race numbers
Specs:
Type: Durafly (PNF) MFX Racer
Wingspan (Standard): 815mm (32.1")
Wingspan (Clipped): 715mm (28.1")
Length: 566mm (22.3")
All Up Weight: Approx 320g (11.29oz) depending on battery used
Weight (no battery): 230g (8.11oz)
Motor: 2212-2200kv brushless outrunner (pre-installed)
E5C: Aerostar 30A G2 brushless (pre-installed)
Servo: 2 x 8g metal geared, 2 x 5g metal-geared (pre-installed)
Prop: 5x5E (included)
Controls: 4 Channel (Throttle, Ailerons, Elevator, Rudder)
Color: Green
Recommended Battery (not supplied): 800~850mAh 4S (14.8V) 25C or higher LiPo
Included:
1 x Durafly MFX Racer airframe (Green)
1 x 2212-2200KV brushless motor
1 x Aerostar G2 30A brushless ESC
2 x 8g metal-geared servo
2 x 5g metal-geared servo
1 x 5x5E propeller
1 x Decal sheet
1 x Accessory pack
mfx racer,rc,rc plane,airplanes,airplane,rc airplane,rc planes,aviation,eflite,plane,edf jet,planes,rc airplanes,beginner rc plane,mfx racer,efx racer,
thercsaylors,best beginner rc plane,aeroplane,flight,rc jet,model airplane,radio control,aircraft,rc saylors,plane crash,
crash,fms,easy to fly,the rc geek,flite test,brian phillips,beginner edf jet,ducted fan,fighter jet,edf,r/c,horizon hobby,
pilot ryan media,remote control,jet,rc crash,pilot,e-flite,fms model,viper,edf jets, rc saylors, brian phillips, efx racer, pilot ryan media, the rc geek
I have the EFX Racer and it's an amazing plane, this is awesome!
Super happy this is 4 channel. Rudder tends to be an afterthought in this size class
i agree 100%!
Koolio…these are fun to fly in pilot racin patterns with others. Great fun and quick.
nice maiden and very nice low passes as well Bro. I got mine coming from hobbyking real soon. thanks for sharing man awesome field by the way
Really appreciate it!! Its a grewt flyer for sure!!
Dat boi haulin!
Ive got a EFX the best 4 channel rocket ive ever owned 🇺🇸👍🏼
"I'm trying to find you but you're so small" That's what she said! 😂
@@thelaneman 🤣🤣🤣🤣🤣😂
Look at this… Where…?
Just curious where is you're club located?
Wonder what kind of speed that was hitting?
It's got to be over 100mph; we will do an Original "Speed Trial" on it!
Did you launch at full throttle? I’m I’m building one and still considering how to launch, whether over handed or under handed
Normally u launch at half throttle
You made me order one from your vid and link. Wanted a small fast prop plane for the hanger. Thanks I guess. Lol.. Say does a standard size spektrum receiver fit? Like a 6 channel ar630?
@@manicfour yes! Im using the 620 reciever but the others will too
@@RCPlaneReviewer thank you
Can this thing take a 6s? My EFX could take one and I was able to hit 171mph stock with it
i dont think so maybe 5s but i dont think so lol, i got close to that speed on my efx too on 5s
no offense but for $139
i can 3d print that exact plane twice and still would have left around $68-$75 for electronic parts.
u know what? i should do this give me a week...
Not everyone has the equipment or ability to 3d print, hence why they're manufactured. Do it.
Need to balance your prop
No it doesnt need it.