Had one, after 14 years and 190,000 miles got tired of it, sold it for $1K. The damn thing is a workhorse, never complains, never left me stranded, never had to replace anything on it other than the catalytic converter after 150K miles, cost me $150 to weld a new one in.
Fast Cat yeah same. Except for my bitch I need to help adding engine oil, and replaced the cat at 168k and I need new tires and a paint job. Ok so right there. Just buy a newer car then.
I had one in black. I would recommend to make the corner light amber with tint film and the highbeam section tint it yellow. Mine got many stares because of that and the lip. Nice car though
Thanks bro, the front are trd lip replicas. Made out of fiberglass from the original ones, you also got the option of the gtec lip. If you look at my other video, you can see it.
i have a black 2001 corolla s and was curios on any suggestions for amps and subs. also headlights i want to get a brighter color for both fog low and high
+yonathan brea i found i believe the passenger side one on ebay for 125, you have to each 1998 2002 corolla rocker panel or trim. i recall someone selling some on my Facebook page 8thGenRollas, give that a try maybe.
Ahmad Amir the Corolla for this model year also came with a Trd package, which had front and rear valence and side skirts. I had some fiberglass replicas on mines.
i was able to get them when replicas were being made, there is a guy in Puerto Rico that makes them now. check out my page 8thGenRollas on Facebook, it's dedicated to these cars. i can then tag you or him.
With this setup i didn't just roll the inner lip in the rear, with my current wheels i have now i had to flare them. I have 16x8.25 0 offset on 165/50/16 tires. Before those i had some 15x9 0 offset wheels
GOGSANGEL okay thanks.... I watched your video with the gold wheels, I think you said they were 17x7.5. . . . I just got those same ones in black. Cept they're 8.5 wide. Do you think I'd still be able to get it nice n low?
Had one, after 14 years and 190,000 miles got tired of it, sold it for $1K. The damn thing is a workhorse, never complains, never left me stranded, never had to replace anything on it other than the catalytic converter after 150K miles, cost me $150 to weld a new one in.
Fast Cat yeah same. Except for my bitch I need to help adding engine oil, and replaced the cat at 168k and I need new tires and a paint job. Ok so right there. Just buy a newer car then.
Just 150K? Shocking ...
classic 2001 Corolla best car on the road Honda can't beat that
My stepdad just got one..for $500 bucks.
104,000 miles, no kids, well taken care of.
2001 corolla S white, stock.
Nice, they are pretty good cars. Some have a oil burning issue, so check for that. It's a known problem.
+GOGSANGEL yah the piston rings on the 1zz fe engine, if you want to fix it you can if not just add oil and it will run
This Corolla should’ve been the first gen XRS with the 2ZZ
That's why i did mine 2zz swap and trust me is a whole different car
UA-cam recommended this video 👍
Where did you get the rims from it you ain’t me asking bro?. I have a silver 2002 and it would look amazing with these on it
Dope af bro keep doing what you're doing,
thanks bro
I had one in black. I would recommend to make the corner light amber with tint film and the highbeam section tint it yellow. Mine got many stares because of that and the lip. Nice car though
I want a same parts from your bumper front lips. Can give me where r like did you buy thanks
Whats the part name of your front bumper? I wanted to do that same lne with a mesh grille and badge delete
CLASSIC
Nice rolla manito. I live in south fl. I wanted to ask you what lip do you have in the front
Thanks bro, the front are trd lip replicas. Made out of fiberglass from the original ones, you also got the option of the gtec lip. If you look at my other video, you can see it.
i have a black 2001 corolla s and was curios on any suggestions for amps and subs. also headlights i want to get a brighter color for both fog low and high
How much will it cost to get the whole Corolla painted white?
wheel / tire specs?
Men de que vehículo ese ese front lip
Muy bonito, que tamaño de rin y llanta tiene?
Qué número de rin tiene
Mi hermano donde conseguistes los lips del frente y el del lado
jorge columbie son réplica trd, ahora si se pueden conseguir en eBay
Car is nice af! Imma need help for mines
Thanks ;), check me out on instagram el_tipico
where can I get the s type side skirt I been looking every where but I can find the same one u have on ur corolla???
kinda difficult, but maybe check your local yards. for scraped S Models or try ebay
+GOGSANGEL yeaa I already try on ebay nothing I try again at the junkyards thank you..
+yonathan brea i found i believe the passenger side one on ebay for 125, you have to each 1998 2002 corolla rocker panel or trim. i recall someone selling some on my Facebook page 8thGenRollas, give that a try maybe.
+GOGSANGEL ok I try that thanks alot..
PLEASE REPLY TO THIS!! WHERE DID YOU GET THE BUMPER OR IS IT STOCK??
Ahmad Amir the Corolla for this model year also came with a Trd package, which had front and rear valence and side skirts. I had some fiberglass replicas on mines.
Where you get the front lip I been looking everywhere
i was able to get them when replicas were being made, there is a guy in Puerto Rico that makes them now.
check out my page 8thGenRollas on Facebook, it's dedicated to these cars. i can then tag you or him.
+GOGSANGEL nice I send you the request now
Where did you get that lip and side skirts bro?
salcido51 side skirts are factory Corolla skirts on the S model, the front are replica trd valence. Sometimes can be found on eBay from Puerto Rico.
cut springs, coilovers, sleeves, or lowering springs?
cheap ebay coilovers
EL LIP DELANTERO DONDE LO CONSEGUISTE ?
un muchacho los estaba haciendo de fiberglass, son replica de los trd front valences originales. ahora en día son muy difícil conseguirlos.
How do adjust the fukn steering wheel height?
how much were the coilovers ? will 98 coilovers fit?
Dg J then i paid about $630, ive seen them go for a bit cheaper now. they fit corolla's from 88 to 2002, same suspension setup.
Did you have to roll the fenders???
With this setup i didn't just roll the inner lip in the rear, with my current wheels i have now i had to flare them. I have 16x8.25 0 offset on 165/50/16 tires. Before those i had some 15x9 0 offset wheels
@@GOGSANGEL this video is with 15's?
@@junglist1soldier yes, the wheels were 15x8.25 +15 offset on 165/50/15.
What body kits is that
Side skirts are from the sport model the front valences are replica of the trd ones that came on these cars
Where did you buy that lip
Ace Boogie they were being made at some point in fiberglass, they were replicas of the original trd ones. the guy stopped making them tho.
What size wheels?
VANZ STRINGZ 15x8 on 165/50/15 tires
GOGSANGEL okay thanks.... I watched your video with the gold wheels, I think you said they were 17x7.5. . . . I just got those same ones in black. Cept they're 8.5 wide. Do you think I'd still be able to get it nice n low?
what are those rims called ?
They are traklite octane
How much I can get them for
Paul Abankwa you have to look it up you lazy fool
what size is the white rims I have 1999 corolla and I'm trying to get that look
They are 15x8 +15 offset on 165/50/15 tires. Check out my Facebook page 8thGenRollas.
..
Ricer
At least he doesn’t have any lambo doors