C6 Corvette gets some major upgrades. whole new car
Вставка
- Опубліковано 15 жов 2024
- We knock out some MASSIVE upgrades to my single turbo 427ci LS powered C6 Corvette competition drift build and it totally transformed the car!
ACT - www.advancedcl...
Alberto's Channel - / @albertobigboost
You can buy some merch and help support the channel! - garagebuiltco.com
Tools Used
Milwaukee Bandsaw - amzn.to/2Zqn4OU With This Stand - amzn.to/3d5bqNv
Cheap Plasma Cutter - amzn.to/3hJdbS7
Milwauke Tool Die Grinder - amzn.to/2MoAQu9
Milwaukee Tool Headlamp - amzn.to/2xUWthH
Small Milwaukee Flood Light - amzn.to/2Sf39Ox
Milwaukee Tool Underhood Light - amzn.to/3f5K6jw
Milwaukee Tool Mid Torque 1/2" Impact(2861-20) amzn.to/3b1bqwG
Milwaukee Tool Stubby 3/8" Impact (Small Most Used Tool)- amzn.to/2Jdirid
Milwauke Tool 3/8" Ratchet (Life Changing) - amzn.to/2JcpQhy
Milwaukee Tool 1/4" Ratchet - amzn.to/35VZM41
Milwaukee Tool Ratchet Wrenches - amzn.to/2CYRFKz
M12 Drill/Driver - amzn.to/35QVZoR
M18 Drill/Driver - amzn.to/2p6WuKJ
Gearwrench 3/8 Socket Set Mid Length (Very Nice Sockets) - amzn.to/2VnbMHm
Gearwrench 3/8 Socket Set Deep - amzn.to/3b1pFBH
Multiprocess Welder - amzn.to/3g6y5dK
Drill Bits - amzn.to/3fc4DkZ
Thanks to all who support me on Patreon! - www.patreon.co...
IG - / taylordrifts
Twitter - / taylordrifts
Email For business Inquires - taylordrifts@gmail.com
I’m very glad ACT and I were able to contribute on making your car even better and helping you push your driving to another level 💪🏼
Was nice seeing you in the video Alberto.
such a blast from the past seeing you, might have yelled Alberto! out loud lol
Nice to see you, man. Hope you're doing well.
very nice seeing you in the video man! its been too long
BIG BOOST!!!!!
Alberto Big Boost? Now that's a name i haven't heard in a long time...
Alberto always been such a good dude!
Love to see BIG BOOST!. Jose, your killin it my dude! Keep up the amazing work.
Taylor, love the content. Super down to earth, and easy to watch. I feel like the videos could be twice as long and I'd still never get bored. I really enjoy how real you and your team are, and wish you the best. Good luck at the comp!
Great to see Alberto Big Boost.... smart mechanic...
I have only been watching on and off for the past years, where has he been, for me he just disapeared
@@jakubczaczyk left adam lz and went out on his own a long time ago, not sure how that has gone
@@Jballzx Was there any reason for the leave? Was kinda swept under the rug, miss his content, does he record anything of his own?
He has his own channel.. but a n bunch n of rumors of why they parted ways.. but nothing bad was said on either side.. but his content is good
@@Sprkzdaddy69 whats the channel name, would love to watch
So sweet to have seen this car in person. Good luck on your next comp bro!
Seeing the vette on the hoist makes me think if the lift on the bus had a removal center section it could be used as a hoist to pull the Trans or service the engine at an event.
Exactly what I thought when they first showed the lift, 4 scaffolder style posts for safety and easy height adjustment if ground is uneven
Been running ACT clutches for years. Love them!
Jose, your killin it my dude! Keep up the amazing work
Was about to comment to compliment him. Takes on whatever is thrown at him! Great team member.
Love the way you explain everything. Makes it super easy to follow your vids.
Is that big boost???? Hell yes
oh yeah! . . he is great
Woah! I haven't seen Alberto in a while!
Hell yeah an Alberto collab! 💪🏼
Alberto big boost!!!! I miss seeing him on UA-cam!
Use a double nut for the v band clamps, the stainless lock nuts are no good for serviceability. Tightening and lossening multiple times galls up the threads when your tqorquing with the intent of "that aint going anywhere"
Taylor Ray is the Adam savage of cars.
Is big boost working for act? Would love to see more with him.
I think he's with team Quickrelease, but could be wrong.
Just add a little heat to the flywheel bolts before you take them out and you will never have to fight them. Love this car!!
Dude I can't wait to see the difference in how you and the car perform with that new clutch. Hopefully it's the difference between like top 4 and 1st place and I am so ready to see this thing get a big win because I know it's built well enough to do it and I think you're finally comfortable in it and used to it enough to really slay some fd drivers 🤞🤞
Those attwood blowers are good quality. I work on boats, and those are the go to blowers we use. I recommend going back to them with the debris shield. Just my 2 cents.
Hell yeah Alberto Big Boost in the house. Would love to see a Taylor Big Boost collaboration build. That would be so awesome.
Taylor i quit watching about a year ago well you just was moving stuff out of the old garage and moved into the house garage anyways you've come along way and everythings different now wow great job 💯💯💯💯
Nice to see Alberto
Nice seeing Big Boost again!
So glad to see big boost on your channel
I didnt used to watch all of the videos but lately im hooked i love this car and the bus. Im hoping that the 2 will allow more competition and driving all over the country
Make sure you clean those fan screens out often as I'm sure they'll clog up quickly. You might even want to make the screens more mushroomed shaped to give them more surface area so they don't clog as quickly.
We use champion oil for our winter or dmi quick change rear end I think it's 144 a case of 12 quarts it works great we actually use it multiple times in our sprincars before we actually change to new to keep cost down cause we'll change a gear 5 times a night sometimes
Ay, Big Boost. Nice to see him.
Alberto good to see him on your video!!!!!
Nicely done good to see alberto "big boost"
Good to See big boost in the cut
Use a little mapp gas torch on those fly wheel bolts. Will come out like butter
@@eriklarson9137 I simply noticed the struggle in the video and gave a suggestion. What are you his boyfriend or something?
A good idea on those blower fans. Is to add a fuse or breaker into them, that way when they do get blocked. They pop a fuse rather than melting the motor.
It had that via the pdm. But it malfunctioned. I need to lower the trip amperage.
Taylor Really love the Vette! Great build! But Those yellow lights!!!nah!!😬🫤
Can the middle floor sections of the lift on the bus be taken out so you can use it as a service lift at the track? might be worth doing as a retrofit if it's an option otherwise
I so much more like to work on rear drive setups than the front drivers and front biased AWD cars. So much easier to pull engines and transmissions. On my old F150 I built an engine for, I had a tee leak on the coolant temp manifold that I built to add a manual gauge while retaining the stock idiot light and the coolant smoked a brand new clutch. Like it wouldn't grab at all. Pressure plate and flywheel were fine so I bought a new clutch disk and after having just swapped in the ZF transmission, I was able to remove the rear crossmember and bellhousing bolts, disconnect the trans while leaving it on the jack, swap out the disks, retorque to spec, reinstall trans and I was test driving it again in 40 minutes exactly. On my wife's car pulling the transmission and reinstalling is a 2 full work day job. I get a little better at it every time, and I might be able to cut it down to one long work day if I don't have to run for parts or anything, but it is a project to pull the engine or trans on that thing. I like driving them better too. Rear drive is just the way to go if you can make it happen.
Thoroughly enjoyed the deep dive into the clutch choice. Makes a lot of sense. 👌🏽
🧈
I use that style of fans to cool down my amplifiers in my basshead truck. Thanks for your videos!
BIG BOOST IN DA HOUSE!! 💪🏻 💪🏻 💪🏻
ACT good Choice T RAY you’re gonna love it🤙🏻
*Alberto!!! Good to see him*
Oh wow bro the motor everything sounds happier with the new clutch in the last clip!! Can’t wait to see the test video!!
Great to see big boost
It was awesome to see big boost I literally hadn’t seen him since Adams channel
Love to see BIG BOOST!
Good luck. Hard work always prevails
You and big boost need to work together more often
When you have a problem bolts/bolts, put the other ones that came loose back in. Since the problem one is real tight, sometimes re-tightening the others helps. Basically the part that they are squeezing, distorts and cocks funny when some of the bolts are out.
very good point and the reason there is importance in torque order
The GoPro mount can attest to how hard that clutch was being run. Damn mount tries to walk away every time he dumps the clutch 😂
good to see BIG BOOST again
That clutch is badass. Im looking for a nice clutch rn for my coyote. Not that gnarly of one but act clutches look nice
Could you mount a fan to extract smoke from inside car with ducting or are there downsides to that? Maybe have it set to where it could pull in cooler air when in grid to keep you cool on nicer days. Then have it pull smoke out of the cabin in comp. Just some late night thinking
That rover light is the best ! I love mine!
ALBERTO! I forgot about that guy. I remember when he was working in Adams house garage!
So stoked to see mr big boost again!
Man you sure can Jibber jab 😂😂😂
Cant wait to see you shred with the new clutch man
Thank you Taylor!
Daymn Taylor,, your hotrod is SOOOO AWESOME! Re; overlooking ordering 'stuff',, we see yu have white boards in various places around the shop,, yeah you know where I'm going with this,, WRITE IT DOWN THE INSTANT IT CROSSES YOUR MIND,, or it will get forgotten EVERYTIME,, LOL 🙂 Yeah,, most of us have been there, dun that and suffered for it.
Jose's beard its absolutely epic. Looks painted on. Good work boys. Love the content
can't wait to see you at Salem!
Sticker table is dope! 😎
Now that you have the bus, you got to come up to Gridlife Circuit Legends next year
I love the way you explain everything as you go. My favorite UA-camr right now!
Great content thanks for sharing
The Tilton 7.25 OT2 Twin disc is great for road racing with the Cerametallic discs. I couldn’t imagine trying to drift with it though
I love mine. Changed the master from a 3/4 to a 5/8 and it’s perfect
Nice works boys, hey suggestion why don't you run another layer of screening infront of the new fans? might catch the 1st layer of tyre debris? just a sugestion. Love the work and good louck for the coming rounds (i'll be watching)
I had a Billet SPEC clutch in my 2015 Mustang EB and it was so beautiful and drove so nice. It did rattle with the twin discs but it was a bad ass clutch. Beat the crap out of it lol
so cool seeing alberto again
I think you're right about the cold air displacement theory. The cold air is more dense, so when you force it into the space, it will displace a larger proportion of hot air than if you took the same volume of air and pulled that out of the space.
You should cut the middle of the loading ramp on the bus out (if structurally safe/possible) so you have a lift at the track
Never been to a drift event. Caught the show you put on Sat night in Bithlo!!! Epic!!! You made my butthole pucker and heart race numerous times standing on the last corner. Will post some videos soon! My Wife and I will definitely be back out to the track soon.
I wondered about that clutch when you put it in, new clutch is a way better fit for the application
Glad for you that last flywheel bolt did come off :D
Good luck with the big bus and the new clutch set up in the Vette !!
I commented to put that mesh stuff on those way back when you were building the vette lol
Good to see Big Boost, learned a lot from that man over the years.
Taylor buy some 50mm edf fans for remote control electric jets way smaller than those big things and with a speed controller you can get then to spin between 30000 and 50000 rpm now thats pushing a shit load of air cheers from down under
29:49 i like that advice
Alberto boost is a super awesome person to get to know. And I hope he were keep posting UA-cam videos on his channel.
Big boost in the house!!!!
Genuine blowers/fans are worth the money, we used to replace countless SPAL fans that came with APU's on trucks we built, finally a customer bought a new genuine SPAL to fit and the logo was slightly different, we ended up having to regulate the current feed as they moved so much extra air they made dust storms.
hey, good to see big boost
Good to see Big Boost, learned a lot from that man.
Gotta say your one of the best build channels when you do build just watched tjhunts and whole vid is him on cam talking not actually seeing the build.
That sneak peek at the end, looks night and day. Cant wait to see it.
Maybe try some high temp anti seize paste on your Y pipe bolts bro. Stainless is terrible for fusing its self together and needing to be cut off
Can't wait to see you compete with the new clutch
I have the tilton cerametalic twin on my jz drift car and love it!
I hope Taylor gets top 8 that'd be a huge boost for him, obviously we want him to win but damn top 8 would be insane!
Have you ever tried Belray gear oil. I used it in my transmission. Or Amsol
Off season, will be nice to make a trans tunnel that can open for better service and stuff
Why don’t you use impact specific sockets? A light thin wall socket is really is awful for trying to remove super tight or big bolts, especially with an impact gun.
If u ever destroy the fenders look into the grand sport fenders. Imo they’re nicer look better and would let more air past!!
The clutch looks more like Bumblebee than anything I’ve seen since the first Transformers.
I’m sure you’ll enjoy the ACT clutch better. The tiltons require short service intervals in which the pressure plate ring has to be “shimmed” if you will, in order to maximize the life of the clutch and reduce slip.
What hot side heat wrap do you have on the pipes?
I have the old-school titanium wrap on my turbo build it would love to change it. I love the channel bud and thanks for the help.
Just from when you started backing out the shop you could tell how much better it is.