SOLO Tacoma Bed Removal
Вставка
- Опубліковано 13 лип 2024
- In this video, I show you how to remove the Tacoma's Truck Bed with no help and all by yourself! I'll also show you some of the tips and tricks with unseizing bolts rusted parts. You will need a specialty tools as that is the minimum requirement when it comes to lifting the truck bed past the fuel filler neck. Yes, it will cost money and space for specialty tools BUT it will get you to a state of being self sufficient when it comes to maintenance and more in depth repair for your vehicles. If you don't have an engine hoist, you can get 3 of your friends to help you lift up each corner of the truck bed - it only weighs a little over 200 pounds.
This is part 6 of the trail repair series and the links to the rest of the series is below:
Here's the link to the rest of the series:
Part 0 - Damage Report: • Everything I broke on ...
Part 1 - Motor Mount Replacement: • Motor Mount Replacemen...
Part 2 - Tacoma BENT Transmission Beam Repair: • BENT Trans Beam Repair...
Part 3 - Rear Diff Leak Repair Tacoma: • Rear Diff Leak Repair ...
Part 4 - U-Joint and Center Bearing Replacement: • U-Joint Updates and Ti...
Part 5 - Tacoma Bed Separation: • SOLO Tacoma Bed Removal
Part 6 - Bed Separation: • SOLO Tacoma Bed Removal
Part 7 - Shackle Flip Design: • Shackle Flip Design Ta...
Part 8 - Shackle Flip Installation: • Shackle Flip Installat...
Check out my links:
Main Store: store.kflo-krib.com
Amazon: amazon.com/shop/kflostacomabuild
Patreon: patreon.kflo-krib.com
IG: KFlo_Tacoma
FB: KFloTacoma/
00:00 - Intro
00:24 - To my new viewers
00:42 - Series Overview
00:57 - Rear Bumper Removal
03:26 - Hammering off the Rear Bumper
04:10 - Tail Light Removal
05:10 - AC Power Source Removal
05:59 - Final Electrical Wiring Removal
07:24 - Truck Bed Mounting Hardware Removal
10:16 - Bed Lifting/Separation
11:20 - Work Recap
11:54 - Next video preview
12:11 - Outro
#ToyotaTacoma #ManualTransmission #Engineer - Авто та транспорт
enjoy watching your videos, question: will the entire has tank be exposed if bed is removed on 2011 tacoma double cab (removal is needed to replace gas pump.) Thanks and God Bless.
Good job
Awesome! Thanks for watching and supporting the channel
great video
Thanks brother, happy Thanksgiving!
@@KFloTacoma same to you
Great job, why was the bed removed. Thanks and God Bless.
Thanks for watching and supporting the channel! The bed was removed for mechanical design purposes. This is part of a few design projects: a shackle flip and a custom bed (the second one still being worked). Here's the detailed design video: ua-cam.com/video/R3_nOvmPIWc/v-deo.html
Are all 6 bolts the same? I've been removing bolts and replacing them with new ones. I have 6 bolts on my bed but the Toyota schematics only show 4.
Get some muriatic pool acid and do a 4 parts water 1 part acid and soak the really rusted hardware in the solution. If no strong enough do a 50/50 solution
That's a great idea, thanks for the input 🤙
Did you run into any melting issues with the composite bed when torching those bolts? I need to do the same to my taco and of course there are 1 or 2 that are seized.
I torched the nut portion which was on the metal frame side - so no issues from my end. I would recommend doing this job in the warmer months though