Power Tools - Best Bit Set - Drill Accessories - DEWALT FLEXTORQ Impact Ready Bit Set
Вставка
- Опубліковано 11 жов 2020
- Looking for DEWALT 20V accessories? Maybe a new Power Tool Accessory? Do you have enough drill and impact driver bit sets laying around? This is a power tool bit set from the DEWALT FLEXTORQ series and it is made tough to be used with your impact driver.
Make sure to watch the entire video for a BONUS AT THE END of this video!
As always thanks for watching! For more videos on tools, DIY, tips, and tool tech please subscribe!
I believe in full transparency so please know first that this video is not sponsored. Links below are affiliate links that I might earn a small commission from if you purchase something from one of my links. This helps me continue to buy gear to continue making more valuable content for you.
Don't have Amazon Prime? Get a 30 day free trial with the link below.
amzn.to/37hOjyN
Featured Dewalt FLEXTORQ Bit Set
amzn.to/3a8SI8O
Dewalt Brushless 20V Impact Driver (Tool Only)
amzn.to/3a3uXPp
Dewalt 20V 3-Speed Impact Driver Kit w/ Hard Case
amzn.to/3oJ9VK4
Dewalt 20V Impact Driver and Drill Combo Kit
amzn.to/2Kjyoqq
That was good thanks for explaining everything 👍
*Excelente kit **MyBest.Tools** suficiente mente potente y ligero. la luz incorporada en el taladro es muy superior a versiones anteriores que se encuentra cerca del broquero.*
sold from your video. now im buying this driver set
That magnetic collar is pretty much well known among trades people, but judging from the comments I didn't realize most DIYers don't know about it. It's great that you put a video out to explain stuff like this. You should put out a video about the advantages of using magnetic extensions and guides for impact drivers versus just using a short bit and driving with it.
I've been wanting to do a video on Impact driver accessories that would cover extensions including Dewalts right angled flex shaft. Unfortunately I've been bogged down with the day job :(. Thanks for the feedback though, it means a lot!
Upgraded from an older 18v kit. ua-cam.com/users/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
Planing to buy one for myself this coming Christmas.
I just bought the same kit today. I like the 3/8 adapter and magnet attachment it comes with.
The 3/8" adapter comes in handy if you need to quickly throw a socket on and don't have a 20V Impact wrench.
@@kohltec9911 Agreed, I have a 3/8 socket set it pairs great with.
Lovely presentation. I am looking into bit sets and I'm really leaning towards these because of your video. Thanks👍
Glad to be able to help out!
Thanks for sharing 3 years later your video helped I got one of these great set for Christmas in 2023 and didn't know how to remove the Magnet screw lock😊
Thank you for posting this helpful video
5:12 literally why I clicked on your video thanks I didn’t know it came off like that 👍🏾
Glad I was able to help!
I got this set and I love it
Awesome bits, nice video!
Thank you!
thanks for explaining that magnet thing. i was about to take the kit back. couldnt figure it out. dewalt needs to explain things on their packaging
Yeah they don't give you a lot to go from on a lot of their accessories and bit packs.
Thanks for the info. Do you have a video of showing how to use the bits with an impact driver or a drill driver?
I need to buy a set. I just recently bought a new impact driver and need some good bits to go along with it. Hopefully the days of using cordless drill to drive screws is over with.
Yes cordless drills are the shit but Milwaukee makes better bits in my opinion
I've got to say this. Never have i had a bit whether Bosch, Irwin, Black and Decker Dewalt or other break. The only portion that wears out in my experience are the tips...
thanks
Can this impact driver fit small drill bits ?
Thanks for "showing" how to get the magnetic collar off the bit!
Thank you for the review. Your video quality is great, too; really shows the product detail. I’ve ordered this as well as a medium tough case for fasteners and older bits and this will snap on nicely.
I like dewalt bosch Makita
Man he looks like he’s got very soft hands. I think he’s got a office job tbh 😂
Is this for europerinan use her we have milimeter?😬
Dig your intro music
What is your favorite bit set for your Impact Driver?
Sad thing, they dont sell these in Europe, they are inch base packs but there is none comperable with mm based stuff :(
Have you used Dewalt FLEXTORQ bits? Do you like them?
This set is not listed on HD at all. Any reason for that?
I have found that HD carries Maxfit and Lowes has FlexTorq from Dewalt. So you would have to buy from Lowes or Amazon.
@@kohltec9911 I just noticed that now! Thank you for the response! Probably going to Lowe's for that bit set this week.
Are these bits worth it for a regular drill.
Absolutely. Much better than generic bits that end up stripping fasteners.
@@kohltec9911 Thanks.
It looks bits are missing in some of the slots
Some slots come emty incase u have extra bits u can put them in one of those slots
Why does no one write the designation of the set only writes dewalt and at this end. Even if you want to buy it is not known what to look for
Buy bits in bulk folks. At least if you use it in work.
Threw my Dewalt's in the trash. Nothing but Milwaukee now.
For bits or power tools? Or both?
And most of them you may never use
That torque zone is BS and I proven this in my daily use over the years. You can also see the failures of multiple torque zone implementations of various company's on "Project Farm". Take care.
Thanks for the feedback!
Really low lighting!!!
I'm a big Milwaukee tools fan...but there version of this set is absolutely trash...my job deals with both Milwaukee and rarely dewalt anymore...but the dewalt version is way better! And thats coming from a Milwaukee fan!
It's really interesting the opinions people provide. I've seen tons of Dewalt users say the bits are horrible from Dewalt. But they often don't specify what series. I have had good luck with the flextorq series from Dewalt, but then again I've had Dewalt users tell me they prefer Milwaukee bits... I have also heard decent things about Makita bits, but have never tried them personally. I appreciate your honesty and you vouching for something that is not your main preference/tool brand!
Maybe invest in some decent lighting for shooting your videos?
One of the first videos I did. I've got some lights now and I am getting better. It takes time and a lot of effort.
this video is a 'bit' much