No but I did take it apart 11 months ago and inspect it and checked the spring and pin and made sure the tension was there. I've heard of people adding more airing tension and having success. I did not find that to help this cause. But if you can correct the issue cheaply go for it
@@spring-start thats awesome I'll pin the comment only issue is tooth wear and actually actuator plate wear. But if it's a low milage and a kit like that can get you going that's great news.
I tried the spring-start kit replacing the vtc spring and it did not fix the issue. 12/20/2023 Update: I can confirm that the @spring-start upgraded extreme spring kit resolves persistant hard to resolve vtc cold start rattle issues on 2014 honda cr-v vehicles. I was battling this rattle on cold start issue for a year and originally installed the somewhat weaker spring-start originally provided which unfortunatly for me did not fix my issue. Upon further discussion with spring-start's amazing customer service and feedback we determined that my vehicle likley needed a stiffer/higher rebound spring and spring-start mailed that out to me in their complementary kit. After tearing appart the vtc gear again and installing this even stiffer spring the rattle on cold start has not happened again and its been a bit over a week since replacement. @spring-start is the real deal and I highly recomend anyone battling with this rattle on cold start issue with hondas to reach out to them and give their vtc replacement springs a shot. They are always willing work through resolution till a solution is found and they have some of the best customer service I have experienced!! Highly recomend!! Knock on wood my issue is finally resolved for good with their extreme extra stiff vtc great updated spring kit!! Whooohoo
@forestpassineau yeah I had tried also giving the spring some extra tension no change. I also have some oil bleed out theories and actual wear on thr actuator that sometimes prevents pin engagement. I donno. Fun story I was actually @ Honda training facility in the 2010s doing my courses and I remember vtc sitting on counters apart. And they themselves the top guy saying we donno why these are failing yet. I don't think they will ever know lol
This was the most comprehensive video for Honda CR-V’s chain and actuator replacement I’ve seen. Congratulations on a job well done. I believe I can do mine if I can come up with the time!❤
Thank you so much for making this video!!! I am so glad that you didn't add music to it and you didn't waste time in unnecessary explanations. You are great mechanic and youtuber!
This is a great video. Thank you for putting this out. I am getting ready to do this on my 2012 CRV. I like the way you went through every step and showed everything so well. Thank you again. GREAT VIDEO!
Did this on a 2013 crv a month ago for my co-worker. We did a full timing refresh with water pump and vtc.. That VTC main bolt was one of the toughest bolts I've dealt with on a Honda.
Great video. I’m a little confused about when you timed the chain. When you went to time it you put the pins in the ends of the cam shafts and then right right after doing that the two arrows at the crank pulley lined up but just before putting the pins in the arrows didn’t line up? What did you do after locking the shafts that made those two arrows at the bottom line up?
Rotating the camshafts moves the crank pulley. But with the chain tensioner when cars are locked the crank can move a bit either way. That’s why it’s important for the coloured links to line up on the marks on the crank pulley. As well as on the cams that will ensure it is all in time.
There's actually a tool from Honda to measure chain stretch. It goes in-between the cylinder head and the exhuast sprocket/chain. And it measures stretch. Regardless. Measuring how many teeth on the tensioner are out when vehicle is in tim is a very good indicator of chain stretch. In my opinion. Regardless yes metal expands when it heats up. There is actually not spec for chain stretch by any manufacturer because there selling point for going from timing belt services to chains was cost savings to the consumer clearly in most manufacturers cases especially vw audi that has not been the case. There is no service interval for chain stretch measurement or replacement. Fun fact.
@@MyHomeGarage In a technical sense, chains do not stretch over time. The pins and barrels wear making the chain longer. But nothing actually stretched. Yes, the chain does sort of 'stretch' when they get hot do to thermal expansion but contract again when they cool off. Not giving you crap, just thought you'd like to know, and maybe you do know.
Manufacturers call it chain stretch so that is what I call it. If you look in service manuals that's the wording they use. Maybe it is used to simplify
@@MyHomeGarage No, I get it. People, including myself use that term all the time. It would be awkward to say that the pins and barrels on your timing chain are worn so the chain is too long. 🙂 But I think it's interesting that that's what actually happens.
@@ToddKing for sure makes you wonder why for example MB chains never stretch, bmw 1 or 2 engines, audi vw all lol, honda rare, toyota rare, some American brands do some engines but not really. I find the topic I Of why some do and some don't interesting.
I recently had to remove the crank pole bolt on my 2003 Honda CRV. I used the special Honda tool it took my friend who is 320 pounds to actually move the breaker bar and I had to hold the Honda socket in place. it took both of us and he’s 320 pounds and he barely got it off
My wife's 2012 CRV has been doing this the last couple of years. It always happened when it was cold. Now that its been warmer this year, it still has been doing it which makes me very nervous. Now we are wondering if we spend the money to get it fixed or get her a new car. I just don't know if it's worth dumping money into a 12 yr old car that might not fix the issue for long. Any advice?
2012 Honda CRV it is going to be hard to replace a car that bullet proof. It’s only flaw being that rattle. If the body is in good shape and it isn’t giving you any issues other then that. If the tires are good. I would spend the money and fix it right with Genuine Honda parts and be good for another 12 years.
I have heard of a instance where the chain stretched enough and there was engine damage because the engine went out of time. Very rare. Also causes excess wear on the cam gear teeth. Just a bunch of little things that could become bigger issues.
The actual special tool indentation on the pulley to counter hold while you loosen the crankpulley broke off a piece when I was using the tool to loosen bolt. Yeah. Otherwise I would never have a reason to replace it. Although on the sabotage element build I did the dampened rubber part of the harmonic balancer was separating so that is good reason to replace also.
I just bought a 2014 crv with 120k miles. It makes the rattling noise on startup (even after sitting for only 1 hour) and the dealership says it's a bad vtc actuator and stretched timing chain and quoted me $2700 for replacement of the timing set. The car runs with no problems and no check engine lights. Do you think I can wait for a check engine light or is it urgent to fix it right away?
@@MyHomeGarage Thanks. But as the only symptom is the rattling noise, isn't it possible that the dealership wants the complete replacement only to make extra profit? What if the problem is only the VTC actuator?
I believe that lack of oil changes. Poor oil quality. Short trips. Cause premature wear on the vtc actuator. But when it rattle’s even when not cold the entire system should be checked including those filters that I addressed on my video aswell as checking the the vtc oil solenoid. So there are variables. Note I was a licensed technician at Honda during the start of these vtc issues. I’ve spoken to the engineers and scene vtc revisions and the issues would come back. I can say that on this vehicle because it’s in my family has not had the rattle return and years ago when o only replaced vtc. Rattle returned within 7-8 months.
Great video, thanks a lot.! My 2012 it's been rattling on start for months (probably 1 year +), but I've been hesitant to bring it to the mechanic because where I live (Bronx NY) there are too many mechanic who are scammers; I know that my car could end-up worse if I don't take care of the rattling, but I'm on a buget (66 yo). My CR-V 2012 also shakes at certain low speed, like loosing the timing; I let go the gas pedal & engage it again to stop the shaking. Is it possible to "only" change the vtc and correct the rattling? or is it mandatory to change the entire chain system?
It is possible to just change the vtc there are methods I believe dealer book time is like 3.1 hours. But everyone cheats it the actual method is to remove the intake camshaft so you can tighten the vtc on the cam loose before its locked. But no one ever did it because then you had to do a valve adjustment after. Honda claimed that's why they were failing premature. That's why I did everything this time. And as you saw the chain had some stretch. Look in the comments some are claiming spring start company can resolve issue with just a repair kit.
I can confirm that the @spring-start upgraded extreme spring kit resolves persistant hard to resolve vtc cold start rattle issues on 2014 honda cr-v vehicles. I was battling this rattle on cold start issue for a year and originally installed the somewhat weaker spring-start originally provided which unfortunatly for me did not fix my issue. Upon further discussion with spring-start's amazing customer service and feedback we determined that my vehicle likley needed a stiffer/higher rebound spring and spring-start mailed that out to me in their complementary kit. After tearing appart the vtc gear again and installing this even stiffer spring the rattle on cold start has not happened again and its been a bit over a week since replacement. @spring-start is the real deal and I highly recomend anyone battling with this rattle on cold start issue with hondas to reach out to them and give their vtc replacement springs a shot. They are always willing work through resolution till a solution is found and they have some of the best customer service I have experienced!! Highly recomend!! Knock on wood my issue is finally resolved for good with their extreme extra stiff vtc great updated spring kit!! Whooohoo
My 2012 shakes at low speed when its cold too. It got better after I changed the transmission fluid. I believe the problem is related to the torque converter.
I first learned about this issue several months ago. I immediately went out and started my 2012 CR-V after sitting overnight with the hood open and my head sticking out the driver's side window in order to hear the faintest rattle. I heard only a perfect start. A few months pass and one morning I hear a terrible 1-second clacking and immediately recognized it's the infamous Honda VTC rattle. That was many weeks ago and only perfect starts since then. I've heard from highly unreliable sources that there's no harm in just letting it continue to rattle and even after replacing the VTC the rattle may return. I'd be curious if your rattle returns in the coming years.
As a former platinum certified technican at Honda. I can undoubtedly tell you that will return. But usually not for a few years. It progressively get worse and more often. There are few reports of thr chain skipping and causing engine damage. This is the 2nd time I've replaced thr vtc actuator. But the first time I replaced the timing components along with it. We are thr original owners of the car. So we have been with it from the beginning. When the rattle returns I will post a video. Hopefully there will be no video for a long time.
I can confirm that the @spring-start upgraded extreme spring kit resolves persistant hard to resolve vtc cold start rattle issues on 2014 honda cr-v vehicles. I was battling this rattle on cold start issue for a year and originally installed the somewhat weaker spring-start originally provided which unfortunatly for me did not fix my issue. Upon further discussion with spring-start's amazing customer service and feedback we determined that my vehicle likley needed a stiffer/higher rebound spring and spring-start mailed that out to me in their complementary kit. After tearing appart the vtc gear again and installing this even stiffer spring the rattle on cold start has not happened again and its been a bit over a week since replacement. @spring-start is the real deal and I highly recomend anyone battling with this rattle on cold start issue with hondas to reach out to them and give their vtc replacement springs a shot. They are always willing work through resolution till a solution is found and they have some of the best customer service I have experienced!! Highly recomend!! Knock on wood my issue is finally resolved for good with their extreme extra stiff vtc great updated spring kit!! Whooohoo
@@matthewmoneta7906 no new chain. Just replaced the vtc gear spring with a stiffer higher rebound rate spring and issue fixed ever since. Hasn't rattled in a few months now where before was rattling every start.
@@forestpassineau I wish I could say the same. 2012 crv spring replaced with the extreme spring and the rattle is exactly the same. I guess the tensioner is next.
My 2011 crv has this problem, will anything bad happen if I don’t fix it? Or can I just live with it without any other issues besides the noise? Thanks
Chain can skip. Engine blows. Or vtc can internally grenade. I haven’t personally scene either but I know someone who’s skin skipped enough and valves hit pistons
If you think it’s worth it I’ll have to have a shop do it, what do you think I should tell them to replace to avoid as much cost as possible or should I just let them do their own diagnostic? Thanks a bunch
@benmeyers2022 confirm rattle by removing serpentine belt leaving vehicle over night. Then start in morning confirming rattle. Then you should replace everything. Most important is vtc actuator. Tensioner and chain. Needs to be installed and tightened correctly before vtc is locked or it could be damaged. Super important
I used to berate Honda for using timing belts 20 years ago. Figured a chain would last forever. Boy I'll take a timing belt replacement over this any day. I'm done with Honda. Loyal customer for 30 years.
tell me what is the name of the program or website where you can find detailed information (step by step) on how to remove and install it all. Thank you very much for the video.
www.hcrv.net/honda_cr_v_2006v_2011_service_manual-1602.html all k24 engines are the same. If you need more detailed you can do on alldatadyi and download the specific manual for 30days
I’ve got 285,000 on my CRV. Makes that noise on start up after it warms up. It goes away. I drive it everywhere. I’m not paying 3k for a repair on a 2011 either with 300k. It’s a belt tensioner pulley. Not the vtc. Timing chains don’t break on Hondas. Ever
Screw driver test is the only way to c real chain stretch bud. Compare length side by side while hanging on the driver shank. I come from vw audi world....i know stretched chains! Lol
I would personally quote 7.5 hours of labour. The end price depends on labour rate. And always use oem honda/acura parts. So labour wise $750 - $1100, parts are around $800-$1000 so on the high end $2000cnd low end $1600cnd.
@@raebbb if you want to confirm. Remove belt. And when you have your first start and you don't hear noise you'll confirm it's thr tensioner. If you hear it it is thr vtc or thr installed it in properly or something else is up
Parts are almost a %1000.00 cnd from dealer with a small discount. Labour wise is probably 6hrs so if your paying $100/hr. $1600 plus tax cnd. Depends where you live obvious in the US, it would be less for parts and labour.
Sorry brother. Most important part is setting thr crank and locking the Cams with those pins. And when you install you new chain all the coloured links on the chain line up with thr marks on thr crank hub and thr cams. Pull thr tensioner pin turn thr motor and make sure you cams and crank still line up with eachother and your golden. It's scary for sure have a service manual with you.
Even the Toyota Rav 4 and other 4 cylinder engines of that era ALL make that noise on cold start up. Not an issue if it doesn't continue to make it once warmed up and oil pressure increases. My 2015 Cr-v does it on cold days after sitting all night and my old Subaru Outback made noises on freezing days. Exact same noise I get in a Toyota Rav 4 ua-cam.com/users/shortsU2qDtzs10yM
It's 100% not normal. Toyotas are caused by the pin in actuator wearing out and thr material the plate is made of wears out prematurely. Hondas have a factory defect. Trust me not normal. Honda just can't figure it out. There are small cases wear engine damage occurs by chain skipping because all the back and forth on start up causes excessive sprocket wear. I only worked at Honda for 15 years and knew people in the technical department who can't explain why these actuators are failing left and right after a few years.
There is a difference between lifter noise on cold start as the lifters fill up with oil if it's been sitting and a cam actuator that should be locked on start up to prevent rattle and movement intill the actual computer takes over control with oil pressure usually
@@MyHomeGaragewell, they all seem to do it and they're millions of K 24 engines out there that seem to be running fine without blowing up. Mine is a split second noise on startup on cold days. Your engine in video is clearly another problem that is more concerning
@@lazyrider6918 that's the noise you noise you get when it gets to its worse. This is the 2nd vtc in this car. But I proved the chain has stretch after 13 years. And alot of starts short trips. The car been noise free ever since repair. I did 100s when I worked at Honda. Sometimes 2 times same car. What do I know I worked there 15 years lol.
@@MyHomeGarage isn't it better to wait for a p0341 code rather repeatedly fix issue? Timing chains stretch no matter what, just like a bicycle chain that was well lubricated. I have 109k on my Cr-V and will do a repair if it progresses past occasional cold start up noise like your video. It is inevitable with enough miles. No?
Great video - have you ever tried the Spring-Start VTC Actuator rebuild kit?
No but I did take it apart 11 months ago and inspect it and checked the spring and pin and made sure the tension was there. I've heard of people adding more airing tension and having success. I did not find that to help this cause. But if you can correct the issue cheaply go for it
@@MyHomeGarage Yes for sure. The Spring- Start kits are cheap, brand new spring and if you need them brand new seals.
@@spring-start thats awesome I'll pin the comment only issue is tooth wear and actually actuator plate wear. But if it's a low milage and a kit like that can get you going that's great news.
I tried the spring-start kit replacing the vtc spring and it did not fix the issue.
12/20/2023 Update: I can confirm that the @spring-start upgraded extreme spring kit resolves persistant hard to resolve vtc cold start rattle issues on 2014 honda cr-v vehicles. I was battling this rattle on cold start issue for a year and originally installed the somewhat weaker spring-start originally provided which unfortunatly for me did not fix my issue. Upon further discussion with spring-start's amazing customer service and feedback we determined that my vehicle likley needed a stiffer/higher rebound spring and spring-start mailed that out to me in their complementary kit. After tearing appart the vtc gear again and installing this even stiffer spring the rattle on cold start has not happened again and its been a bit over a week since replacement. @spring-start is the real deal and I highly recomend anyone battling with this rattle on cold start issue with hondas to reach out to them and give their vtc replacement springs a shot. They are always willing work through resolution till a solution is found and they have some of the best customer service I have experienced!! Highly recomend!! Knock on wood my issue is finally resolved for good with their extreme extra stiff vtc great updated spring kit!! Whooohoo
@forestpassineau yeah I had tried also giving the spring some extra tension no change. I also have some oil bleed out theories and actual wear on thr actuator that sometimes prevents pin engagement. I donno. Fun story I was actually @ Honda training facility in the 2010s doing my courses and I remember vtc sitting on counters apart. And they themselves the top guy saying we donno why these are failing yet. I don't think they will ever know lol
This was the most comprehensive video for Honda CR-V’s chain and actuator replacement I’ve seen. Congratulations on a job well done. I believe I can do mine if I can come up with the time!❤
Thanks brother.
Thank you so much for making this video!!! I am so glad that you didn't add music to it and you didn't waste time in unnecessary explanations. You are great mechanic and youtuber!
This is a great video. Thank you for putting this out. I am getting ready to do this on my 2012 CRV. I like the way you went through every step and showed everything so well. Thank you again. GREAT VIDEO!
Did the best I could.
Did this on a 2013 crv a month ago for my co-worker. We did a full timing refresh with water pump and vtc.. That VTC main bolt was one of the toughest bolts I've dealt with on a Honda.
Yeah the first time it’s removed it is tight.
Great Video-I was about to do a timing chain on 2011 honda crv. This video help out alot with my project
Great video. I’m a little confused about when you timed the chain. When you went to time it you put the pins in the ends of the cam shafts and then right right after doing that the two arrows at the crank pulley lined up but just before putting the pins in the arrows didn’t line up? What did you do after locking the shafts that made those two arrows at the bottom line up?
Rotating the camshafts moves the crank pulley. But with the chain tensioner when cars are locked the crank can move a bit either way. That’s why it’s important for the coloured links to line up on the marks on the crank pulley. As well as on the cams that will ensure it is all in time.
You have measure chain stretch when it runs and when it’s heated up. After a certain number of thermal cycles the metal will stretch
There's actually a tool from Honda to measure chain stretch. It goes in-between the cylinder head and the exhuast sprocket/chain. And it measures stretch. Regardless. Measuring how many teeth on the tensioner are out when vehicle is in tim is a very good indicator of chain stretch. In my opinion. Regardless yes metal expands when it heats up. There is actually not spec for chain stretch by any manufacturer because there selling point for going from timing belt services to chains was cost savings to the consumer clearly in most manufacturers cases especially vw audi that has not been the case. There is no service interval for chain stretch measurement or replacement. Fun fact.
@@MyHomeGarage In a technical sense, chains do not stretch over time. The pins and barrels wear making the chain longer. But nothing actually stretched. Yes, the chain does sort of 'stretch' when they get hot do to thermal expansion but contract again when they cool off. Not giving you crap, just thought you'd like to know, and maybe you do know.
Manufacturers call it chain stretch so that is what I call it. If you look in service manuals that's the wording they use. Maybe it is used to simplify
@@MyHomeGarage No, I get it. People, including myself use that term all the time. It would be awkward to say that the pins and barrels on your timing chain are worn so the chain is too long. 🙂 But I think it's interesting that that's what actually happens.
@@ToddKing for sure makes you wonder why for example MB chains never stretch, bmw 1 or 2 engines, audi vw all lol, honda rare, toyota rare, some American brands do some engines but not really. I find the topic I
Of why some do and some don't interesting.
I recently had to remove the crank pole bolt on my 2003 Honda CRV. I used the special Honda tool it took my friend who is 320 pounds to actually move the breaker bar and I had to hold the Honda socket in place. it took both of us and he’s 320 pounds and he barely got it off
My 2015 CRV sounds EXACTLY like this. Thank you for this diagnostic help. How much should this repair cost at a shop?
$1000.00 in parts between around 7 hrs labour @ 100-180/hr
Can the chain tensioner be replaced thru the hole or you have to remove the whole timing cover?
There are sneaky tickets to get it done. But if your not good with your fingers it will skip a tooth
My wife's 2012 CRV has been doing this the last couple of years. It always happened when it was cold. Now that its been warmer this year, it still has been doing it which makes me very nervous. Now we are wondering if we spend the money to get it fixed or get her a new car. I just don't know if it's worth dumping money into a 12 yr old car that might not fix the issue for long. Any advice?
2012 Honda CRV it is going to be hard to replace a car that bullet proof. It’s only flaw being that rattle. If the body is in good shape and it isn’t giving you any issues other then that. If the tires are good. I would spend the money and fix it right with Genuine Honda parts and be good for another 12 years.
We have a used 2012 Accord SE, exhibits a quick rattle(
I have heard of a instance where the chain stretched enough and there was engine damage because the engine went out of time. Very rare. Also causes excess wear on the cam gear teeth. Just a bunch of little things that could become bigger issues.
Why did you want to change the harmonic balancer. Was it bcuz it was corroded or do they wear out
The actual special tool indentation on the pulley to counter hold while you loosen the crankpulley broke off a piece when I was using the tool to loosen bolt. Yeah. Otherwise I would never have a reason to replace it. Although on the sabotage element build I did the dampened rubber part of the harmonic balancer was separating so that is good reason to replace also.
Really good video really really really professional really nice
I just bought a 2014 crv with 120k miles. It makes the rattling noise on startup (even after sitting for only 1 hour) and the dealership says it's a bad vtc actuator and stretched timing chain and quoted me $2700 for replacement of the timing set. The car runs with no problems and no check engine lights. Do you think I can wait for a check engine light or is it urgent to fix it right away?
I think it’s pretty urgent. I Donno how many people have actually had a chain break on one but I wouldn’t want to find out.
@@MyHomeGarage Thanks. But as the only symptom is the rattling noise, isn't it possible that the dealership wants the complete replacement only to make extra profit? What if the problem is only the VTC actuator?
@aliseyedi16 i checked everything on mine it was on its 2nd actuator. And I can confirm the chain was sretched
I believe that lack of oil changes. Poor oil quality. Short trips. Cause premature wear on the vtc actuator. But when it rattle’s even when not cold the entire system should be checked including those filters that I addressed on my video aswell as checking the the vtc oil solenoid. So there are variables. Note I was a licensed technician at Honda during the start of these vtc issues. I’ve spoken to the engineers and scene vtc revisions and the issues would come back. I can say that on this vehicle because it’s in my family has not had the rattle return and years ago when o only replaced vtc. Rattle returned within 7-8 months.
I saw the same rattle. On a vid. Was not the vtc. It was the belt tensioner
Great video, thanks a lot.!
My 2012 it's been rattling on start for months (probably 1 year +), but I've been hesitant to bring it to the mechanic because where I live (Bronx NY) there are too many mechanic who are scammers; I know that my car could end-up worse if I don't take care of the rattling, but I'm on a buget (66 yo).
My CR-V 2012 also shakes at certain low speed, like loosing the timing; I let go the gas pedal & engage it again to stop the shaking.
Is it possible to "only" change the vtc and correct the rattling? or is it mandatory to change the entire chain system?
It is possible to just change the vtc there are methods I believe dealer book time is like 3.1 hours. But everyone cheats it the actual method is to remove the intake camshaft so you can tighten the vtc on the cam loose before its locked. But no one ever did it because then you had to do a valve adjustment after. Honda claimed that's why they were failing premature. That's why I did everything this time. And as you saw the chain had some stretch. Look in the comments some are claiming spring start company can resolve issue with just a repair kit.
Thanks for your reply.!@@MyHomeGarage
I can confirm that the @spring-start upgraded extreme spring kit resolves persistant hard to resolve vtc cold start rattle issues on 2014 honda cr-v vehicles. I was battling this rattle on cold start issue for a year and originally installed the somewhat weaker spring-start originally provided which unfortunatly for me did not fix my issue. Upon further discussion with spring-start's amazing customer service and feedback we determined that my vehicle likley needed a stiffer/higher rebound spring and spring-start mailed that out to me in their complementary kit. After tearing appart the vtc gear again and installing this even stiffer spring the rattle on cold start has not happened again and its been a bit over a week since replacement. @spring-start is the real deal and I highly recomend anyone battling with this rattle on cold start issue with hondas to reach out to them and give their vtc replacement springs a shot. They are always willing work through resolution till a solution is found and they have some of the best customer service I have experienced!! Highly recomend!! Knock on wood my issue is finally resolved for good with their extreme extra stiff vtc great updated spring kit!! Whooohoo
My 2012 shakes at low speed when its cold too. It got better after I changed the transmission fluid. I believe the problem is related to the torque converter.
I first learned about this issue several months ago. I immediately went out and started my 2012 CR-V after sitting overnight with the hood open and my head sticking out the driver's side window in order to hear the faintest rattle. I heard only a perfect start. A few months pass and one morning I hear a terrible 1-second clacking and immediately recognized it's the infamous Honda VTC rattle. That was many weeks ago and only perfect starts since then. I've heard from highly unreliable sources that there's no harm in just letting it continue to rattle and even after replacing the VTC the rattle may return. I'd be curious if your rattle returns in the coming years.
As a former platinum certified technican at Honda. I can undoubtedly tell you that will return. But usually not for a few years. It progressively get worse and more often. There are few reports of thr chain skipping and causing engine damage. This is the 2nd time I've replaced thr vtc actuator. But the first time I replaced the timing components along with it. We are thr original owners of the car. So we have been with it from the beginning. When the rattle returns I will post a video. Hopefully there will be no video for a long time.
I can confirm that the @spring-start upgraded extreme spring kit resolves persistant hard to resolve vtc cold start rattle issues on 2014 honda cr-v vehicles. I was battling this rattle on cold start issue for a year and originally installed the somewhat weaker spring-start originally provided which unfortunatly for me did not fix my issue. Upon further discussion with spring-start's amazing customer service and feedback we determined that my vehicle likley needed a stiffer/higher rebound spring and spring-start mailed that out to me in their complementary kit. After tearing appart the vtc gear again and installing this even stiffer spring the rattle on cold start has not happened again and its been a bit over a week since replacement. @spring-start is the real deal and I highly recomend anyone battling with this rattle on cold start issue with hondas to reach out to them and give their vtc replacement springs a shot. They are always willing work through resolution till a solution is found and they have some of the best customer service I have experienced!! Highly recomend!! Knock on wood my issue is finally resolved for good with their extreme extra stiff vtc great updated spring kit!! Whooohoo
@@forestpassineaudid you replace the chain itself?
@@matthewmoneta7906 no new chain. Just replaced the vtc gear spring with a stiffer higher rebound rate spring and issue fixed ever since. Hasn't rattled in a few months now where before was rattling every start.
@@forestpassineau I wish I could say the same. 2012 crv spring replaced with the extreme spring and the rattle is exactly the same. I guess the tensioner is next.
My 2011 crv has this problem, will anything bad happen if I don’t fix it? Or can I just live with it without any other issues besides the noise? Thanks
Chain can skip. Engine blows. Or vtc can internally grenade. I haven’t personally scene either but I know someone who’s skin skipped enough and valves hit pistons
So probably something to do just to be safe
If you think it’s worth it I’ll have to have a shop do it, what do you think I should tell them to replace to avoid as much cost as possible or should I just let them do their own diagnostic? Thanks a bunch
@benmeyers2022 confirm rattle by removing serpentine belt leaving vehicle over night. Then start in morning confirming rattle. Then you should replace everything. Most important is vtc actuator. Tensioner and chain. Needs to be installed and tightened correctly before vtc is locked or it could be damaged. Super important
Alright thank you I’ll let the shop know the issues when I get the oil changed next week, thanks again for the help
great job! do you notice the rpm was pretty high at 1200 RPM?
Well cold start rpm should be right. But it should idle between 750-900 rpm while idling in drive.
I used to berate Honda for using timing belts 20 years ago. Figured a chain would last forever. Boy I'll take a timing belt replacement over this any day. I'm done with Honda. Loyal customer for 30 years.
I personally have decided the extra cost of a German car is worth it to me personally. But if you want to keep it forever Honda/Toyota .
tell me what is the name of the program or website where you can find detailed information (step by step) on how to remove and install it all.
Thank you very much for the video.
www.hcrv.net/honda_cr_v_2006v_2011_service_manual-1602.html all k24 engines are the same. If you need more detailed you can do on alldatadyi and download the specific manual for 30days
@@MyHomeGarage Thanks
I’ve got 285,000 on my CRV. Makes that noise on start up after it warms up. It goes away. I drive it everywhere. I’m not paying 3k for a repair on a 2011 either with 300k. It’s a belt tensioner pulley. Not the vtc. Timing chains don’t break on Hondas. Ever
Great vid too! Thank u!
Screw driver test is the only way to c real chain stretch bud. Compare length side by side while hanging on the driver shank. I come from vw audi world....i know stretched chains! Lol
Great job 😊
It's the VTC acutator issue.
Mine has more of a grinding noise than a rattle. It is not the starter but sounds similar
That's when it gets real bad lol.
What’s the torque specs for valve cover
8ft lbs or less just need to compress rubber gasket
@@MyHomeGarage 😬i torqued them all to 15lbs plus
@@kooreh4998 12nm
What would be the price for the repair?
I would personally quote 7.5 hours of labour. The end price depends on labour rate. And always use oem honda/acura parts. So labour wise $750 - $1100, parts are around $800-$1000 so on the high end $2000cnd low end $1600cnd.
@@MyHomeGaragefuck that
I recently had Honda replace my VTC actuator on my 2014 Honda CRV. It did not fix the issue as the noise was still there the following day.
Then it wasn't a actuator. Friend of mine at Honda said that sometimes the serpentine belt tensioner failure causes that noise
@@MyHomeGarage It normally only makes the noise once a day at first start. Do you believe that the belt tensioner could still be the culprit? Thanks.
@@raebbb if you want to confirm. Remove belt. And when you have your first start and you don't hear noise you'll confirm it's thr tensioner. If you hear it it is thr vtc or thr installed it in properly or something else is up
@@MyHomeGaragethanks for all the info
@@raebbb thank John@open road Honda for pointing that out to me this past year. So it has happened before.
Try changing to pennzoil synthetic and give it a few weeks for it to stop
what does a job like that cost?
Parts are almost a %1000.00 cnd from dealer with a small discount. Labour wise is probably 6hrs so if your paying $100/hr. $1600 plus tax cnd. Depends where you live obvious in the US, it would be less for parts and labour.
I'm in minnesota, was quoted 3k for "timing kit replacment" from smaller local shop.
Nice video. But I can not see clearly. Because de video is to fast. Any way thanks for your job.
Sorry brother. Most important part is setting thr crank and locking the Cams with those pins. And when you install you new chain all the coloured links on the chain line up with thr marks on thr crank hub and thr cams. Pull thr tensioner pin turn thr motor and make sure you cams and crank still line up with eachother and your golden. It's scary for sure have a service manual with you.
Fuck that.
Great video thanks for sharing
No problem.
Even the Toyota Rav 4 and other 4 cylinder engines of that era ALL make that noise on cold start up. Not an issue if it doesn't continue to make it once warmed up and oil pressure increases. My 2015 Cr-v does it on cold days after sitting all night and my old Subaru Outback made noises on freezing days. Exact same noise I get in a Toyota Rav 4
ua-cam.com/users/shortsU2qDtzs10yM
It's 100% not normal. Toyotas are caused by the pin in actuator wearing out and thr material the plate is made of wears out prematurely. Hondas have a factory defect. Trust me not normal. Honda just can't figure it out. There are small cases wear engine damage occurs by chain skipping because all the back and forth on start up causes excessive sprocket wear. I only worked at Honda for 15 years and knew people in the technical department who can't explain why these actuators are failing left and right after a few years.
There is a difference between lifter noise on cold start as the lifters fill up with oil if it's been sitting and a cam actuator that should be locked on start up to prevent rattle and movement intill the actual computer takes over control with oil pressure usually
@@MyHomeGaragewell, they all seem to do it and they're millions of K 24 engines out there that seem to be running fine without blowing up. Mine is a split second noise on startup on cold days. Your engine in video is clearly another problem that is more concerning
@@lazyrider6918 that's the noise you noise you get when it gets to its worse. This is the 2nd vtc in this car. But I proved the chain has stretch after 13 years. And alot of starts short trips. The car been noise free ever since repair. I did 100s when I worked at Honda. Sometimes 2 times same car. What do I know I worked there 15 years lol.
@@MyHomeGarage isn't it better to wait for a p0341 code rather repeatedly fix issue? Timing chains stretch no matter what, just like a bicycle chain that was well lubricated. I have 109k on my Cr-V and will do a repair if it progresses past occasional cold start up noise like your video. It is inevitable with enough miles. No?