I guess the reason it comes on a little bit with that glow is because Polaris has their switch on the negative side, not the positive side so these LED lights will consume a little energy because the positive side is always hot. I found that out from another video, the guy installed a relay to fix the issue if it bothers anyone, thanks for your videos, much appreciated
I almost think my 2019 900 has this plug in the back under the bed. Will be checking in morning. Thanks for putting up your vids. They’re always informative.
boblarson22 I can’t find the spare wire connector as he has that can just be plugged in anywhere in the back of my 900. I haven’t done anything with it yet though, but it’ll more than likely have to be wired completely. Unless you’ve found the open connection like he has and I can’t find it on mine?
Yes it was slightly on when I first got it. This was one of his older model lights and he switched to a different one now. It doesn't come on unless it's in reverse. I went ahead and purchased his new one.
Hey UTV Dirt really good videos on everything y’all do, one question I ordered the led reverse light and I don’t see on my 2020 Ranger XP 1000 where it would plug in at there is a blue plug but it’s plugged in already with nowhere to plug anything else in can you help
There should be two plugs in the back the blue one will have a dust cap plug on it that you have to remove so that you can plug in the light. Mine is a 2018 unless 2020 changed it so not sure. Hope this helps.
UTV DIRT I’ll definitely check it out again but I definitely don’t think I saw anything this afternoon but thank you for replying so quickly appreciate it bud
@@UTVDIRT Awesome, going to order one now! Keep up the great videos. I pick up a 2019 ranger crew tomorrow and I've already order the beam tech headlights and light bar I have seen on your channel.
No it is only for 2018-2020 XP 1000. I do believe he makes them for the 900. Check him out on ebay. Use the search bar and type in Polaris back up light. His seller name is barrycomputers. Hope this helps. Thanks for watching!
@@UTVDIRT I also have a 2019 northstar and wish I could get a backup light do u think it's possible to get this light and still plug and play and maybe locate it somewhere else in the rear?
@@msgt1942 Not sure. You would have to check and see if you have a plug underneath your bed that has a dust cap on it. Also I believe your muffler is in the rear and that's one of the main reasons because their is no where to mount the LED.
I guess the reason it comes on a little bit with that glow is because Polaris has their switch on the negative side, not the positive side so these LED lights will consume a little energy because the positive side is always hot. I found that out from another video, the guy installed a relay to fix the issue if it bothers anyone, thanks for your videos, much appreciated
Thank for sharing the information. I’m new to the Polaris SXS world so this helps greatly. Keep up the good work!!
I almost think my 2019 900 has this plug in the back under the bed. Will be checking in morning. Thanks for putting up your vids. They’re always informative.
Thanks Jay!
Jay Bilawchuk Were you able to hook up the light? Wondering, because I have the same machine.
boblarson22 I can’t find the spare wire connector as he has that can just be plugged in anywhere in the back of my 900. I haven’t done anything with it yet though, but it’ll more than likely have to be wired completely. Unless you’ve found the open connection like he has and I can’t find it on mine?
Jay Bilawchuk Haven't looked
Got my backup light on today love it I found that the best way to access the plug in is to lift the bed of Ranger much easier thanks again !!!!
Nice! Glad you like it!
Any chance the 2020 Ranger 1000EPS has that plug or is it just the XP's?
It will only work for the XP 1000.
When you first showed the machine outside you can see the light looks like it is glowing, was that eh case or was it reflecting your camera light
Yes it was slightly on when I first got it. This was one of his older model lights and he switched to a different one now. It doesn't come on unless it's in reverse. I went ahead and purchased his new one.
@@UTVDIRT Thanks for the quick reply. I have a 570 full size 2018, I hope I have this plug in at back, will look tomorrow
Installed this light tonight. Its awesome. Thanks for the video
No problem! It's a nice LED. Thanks for watching!
Wow, I'll have to check if my 2018 General has that wire there, or do you know?
I am not sure if it will work on your General.
Hey UTV Dirt really good videos on everything y’all do, one question I ordered the led reverse light and I don’t see on my 2020 Ranger XP 1000 where it would plug in at there is a blue plug but it’s plugged in already with nowhere to plug anything else in can you help
There should be two plugs in the back the blue one will have a dust cap plug on it that you have to remove so that you can plug in the light. Mine is a 2018 unless 2020 changed it so not sure. Hope this helps.
UTV DIRT I’ll definitely check it out again but I definitely don’t think I saw anything this afternoon but thank you for replying so quickly appreciate it bud
No problem. Thanks for watching!
Hi, Can't find the light on amazon, I looked under, " plug and play back up light Led" what's the manufactures name, THANK YOU
Hi it is on Ebay. Just type plug and play backup light and it should pop right up.
Ordered one tonight. Thanks for the video.
Great! You will not be disappointed it is really bright. Thanks!
My 2018 does not have a blue plug in. Any help or pictures finding this?
The plug is black with blue at the end of it and is located in the middle of the bed.
at 3:50 is the light glowing a little before you but it in reverse ?
Yes it has a faint light after it shuts off. The instructions says it does that for 2 minutes than shuts off. I checked it and it's off.
@@UTVDIRT Awesome, going to order one now! Keep up the great videos. I pick up a 2019 ranger crew tomorrow and I've already order the beam tech headlights and light bar I have seen on your channel.
Awesome! I'm glad you like the videos. Thanks!
Thanks for the video. Was wondering how I was going to wire in a light and found this. Will this also work on a 2019 Ranger 900 Crew?
@@charrheel3659 The backup light only works on 18-19 Ranger XP 1000. Thanks for watching
Will this light work on a 2020 Ranger 570?
No it is for the xp 1000 only.
Or 2020 1000 non xp
Does this work on 2018 900 XP
No it is only for 2018-2020 XP 1000. I do believe he makes them for the 900. Check him out on ebay. Use the search bar and type in Polaris back up light. His seller name is barrycomputers. Hope this helps. Thanks for watching!
Do this work as well on the 2016 Polaris General 1000?
No it only works on the 18-19 Ranger. Sorry
@@UTVDIRT I thought so, there is plug on the same place, but it is much bigger. Thank you for the answer.
No problem thanks for watching.
Hi can you send me the link for the ligth please thanks
www.ebay.com/itm/2018-21-POLARIS-RANGER-XP-1000-BACK-UP-LIGHT-WITH-FACTORY-PLUG-NO-HOLES/283099862286?hash=item41ea11150e:g:pGQAAOSwZtlaP85v
Would this work on a 2021 ranger xp1000?
Yes it will work.
Can you zoom in a little closer on which wire to plug into ?
It is the only wire that has the blue dust cap on it. Real easy job. Thanks for watching!
Shweet as the kids say... ordering one.
I looked for the plug and play backup light on eBay and I couldn’t find it is there anything special I have to type in
Here is the ebay item # 283099862286. Just type that in the search bar and it should pop up.
Found it thank u can’t wait for more videos
Your welcome. Thanks!
Is yours still working?
Yes no issues at all.
Gotta get one of these!!!
What brand is the light
I purchased the light off of Ebay. Type in the Ebay search bar Polaris backup light and it should show up. The seller is Barrycomputers llc.
Where do you order this light?
On ebay. Here is the item #283099862286. Just type that in the ebay search bar and should come up.
Thank you!
No problem
How to I get the reverse light to shut off. It glows when not in reverse. Is there something else I can do so it is off completely when not in reverse
Install a relay in the circuit.
sad that it won't fit on my 2019 Northstar
Yeah because of the rear mounted muffler. They might come up with something down the line. I will keep my eye open.
@@UTVDIRT I also have a 2019 northstar and wish I could get a backup light do u think it's possible to get this light and still plug and play and maybe locate it somewhere else in the rear?
@@msgt1942 Not sure. You would have to check and see if you have a plug underneath your bed that has a dust cap on it. Also I believe your muffler is in the rear and that's one of the main reasons because their is no where to mount the LED.
Can u shoot me the link for this item
www.ebay.com/itm/283099862286?hash=item41ea11150e:g:pGQAAOSwZtlaP85v
@@UTVDIRTis the body of this light aluminum or plastic
thank you and great videos
Because I have a 2018 northstar and im unsure where it would mount.
Mine was metal
Have not been able to find it on amazon anyone have part number.
It can be found on Ebay. Just type in search bar item number 283099862286
@@UTVDIRT tks
Can you contact me again back-up led guy have other real plug and play kits .By the way great video
Anyway to order direct and not on eBay?
After almost 1 year of use not working. Anyone else have this happen?
No worky on my Northstar
Yeah the muffler is in the way. You can put pods on top. I did a install video on it.