I just used it to do two rooms here at home and it worked just fine. It does have a learning curve. Make sure you are careful when loading it with fresh paint. Too much paint and it will drip or get paint on the rollers leaving track marks on the other surface. Keeping that in mind it worked exactly as intended. I will never paint anything here at home without one. In fact if I don’t have one I will actually drive to the store to get one before I start painting. It does work. Be smart, have common sense, use your brain, be patient and the results will be great.
Being patient and loading with a brush are definitely the key. I could see the minute I bought this that plenty of people were going to watch tuts of guys dipping it in paint and then have problems. And you know, good results take time no matter your method. People think it’s a slam bam process and then complain about results.
I just noticed another poster and i agree 100 %. If your painting your ealls your trim likely needs refreshing. . Caulk your gaps first. Then paint paint out your trim. Then do the walls.. it is way easier to cut in your walls than cutting in your trim.. Get 2 high quality brushes a 2.5 and a 3 inch angled sash brushes . I say 2 because 1 will always work better than the other depending on the application. I dont use tape ever except base to the floor.. laarn how to free hand... try it on a out of the way location. Youll be cutting in like a champ in no time. As far as the pads go.. never used one but willing to try as i have a very awkward stairwell to do and my ladders dont fit but i can reach with a pole.. so i will withhold my critique. Cheers.
I bought something like these before watching your video. I found it to be completely worthless. Just like you, paint got where it shouldn't have, defeating the entire purpose of these tools. Now I have to go back and repaint the ceiling and baseboards. Taping would save time in the long run. Steer clear.
I found the track wheels didn't work for base board, saved so much time on casings and the ceiling/wall. I was satisfied that even with the occasional drip or miss, it save so much time. Another poster recommended applying the paint with a brush; that worked better for me as well, including using a roller. The baseboard probably isn't an option.
Mine is made upside down! I can't turn the handle, so you can't do edging against the ceiling. Don't see a business phone number, so the tool and pads I bought are useless! The handle actually points down over the roller edge. Weird! Any suggestions?
Sorry I am just seeing your question. Were you able to get it corrected? I would return it to the store you bought it or contact them through other means...Facebook, email, chats.
Simple solution... use a 2.5” brush and learn! Not speaking directly to you but everyone reading this comment. What’s the harm? You learn to appreciate the time and effort that goes into painting instead of using “technological advances” tools like this. Plus it’s fun and worth knowing.
These are not “technologically advanced” as you say. I have been using ones like this product for nearly 50 years here in Canada. I wouldn't even think to start painting a room without one. One can do a large living room trim in about 20 to 30 minutes. Awesome is what I would call them. The demo was very poorly demonstrated in my opinion. Watching this video, I would have never purchased my first one.
I painted my previous house from top to bottom, doing the edging with a brush. Looking forward to trying out an edging tool this time round. This is hardly a 'technological advance'... it's simply a time saver.
The results of an edging tool vs. brush changes depending on your current skill level and eye for what is an acceptable job. Years ago, I didn't know the differences in brushes or how much paint to load onto it, so the tool was a godsend. I didn't really care that often the paint didn't go all the way to the corner, because at least it was a straight line. But after a lot more experience and learning that using a brush can get you much more precise results, and I don't use the pad unless the need for speed > precision.
All these stupid gadgets gimme a paint brush roller drop and a gallon of paint... that thing is junk yea sure clean line.... Just do it the right way watch some videos on how to paint with REAL tools...
Was the paint on the trim and it didn't get right up to the molding crevasse? Really and you are diy...ing this item? And quote we are going to repaint the trim... Wasn't that the reason for using this tool.
I’m terrible at cutting in so I have found the red one from shurline quite usefull. Can a pro or even a lot of diyer’s do a better job and faster with a hand brush I would think so, but I have tried and I can not or just do not care to learn. Most likely the latter
True, but this is intended to help everyday homeowners get good results on their own. I've had issues with blue painters tape not sealing properly and cutting in with a brush is an art. I've used the Shur-Line version of the paint pad for years and have painted entire houses quickly and get great results.
If you aren't a painter, not sure why you would expect to get the precision they get with a brush. It isn't marketed to professional painters. I assumed that was obvious, apparently not obvious to all.
I just used it to do two rooms here at home and it worked just fine. It does have a learning curve. Make sure you are careful when loading it with fresh paint. Too much paint and it will drip or get paint on the rollers leaving track marks on the other surface. Keeping that in mind it worked exactly as
intended. I will never paint anything here at home without one. In fact if I don’t have one I will actually drive to the store to get one before I start painting. It does work. Be smart, have common sense, use your brain, be patient and the results will be great.
Being patient and loading with a brush are definitely the key. I could see the minute I bought this that plenty of people were going to watch tuts of guys dipping it in paint and then have problems. And you know, good results take time no matter your method. People think it’s a slam bam process and then complain about results.
I just noticed another poster and i agree 100 %.
If your painting your ealls your trim likely needs refreshing.
. Caulk your gaps first. Then paint paint out your trim. Then do the walls.. it is way easier to cut in your walls than cutting in your trim..
Get 2 high quality brushes a 2.5 and a 3 inch angled sash brushes . I say 2 because 1 will always work better than the other depending on the application.
I dont use tape ever except base to the floor.. laarn how to free hand... try it on a out of the way location. Youll be cutting in like a champ in no time.
As far as the pads go.. never used one but willing to try as i have a very awkward stairwell to do and my ladders dont fit but i can reach with a pole.. so i will withhold my critique.
Cheers.
Paint the pad with a brush
Great idea
I bought something like these before watching your video. I found it to be completely worthless. Just like you, paint got where it shouldn't have, defeating the entire purpose of these tools. Now I have to go back and repaint the ceiling and baseboards. Taping would save time in the long run.
Steer clear.
So if you noticed paint getting all over the place why did yo continue using it ? I highly doubt you are telling the truth
@@dirkdiggler9379 believe what you will. The product is garbage either way.
I found the track wheels didn't work for base board, saved so much time on casings and the ceiling/wall. I was satisfied that even with the occasional drip or miss, it save so much time. Another poster recommended applying the paint with a brush; that worked better for me as well, including using a roller. The baseboard probably isn't an option.
User error 100%
@germanshepherd13 Product is 100% garbage.
I don't get it.
You're gonna have to fix it but it's good for ceilings?
Mine is made upside down! I can't turn the handle, so you can't do edging against the ceiling. Don't see a business phone number, so the tool and pads I bought are useless! The handle actually points down over the roller edge. Weird! Any suggestions?
Sorry I am just seeing your question. Were you able to get it corrected? I would return it to the store you bought it or contact them through other means...Facebook, email, chats.
🤦🏻♂️
Nothing to protect the floor?
I must have purchased the cheap one it kept coming off!
I bought one of these. Keep in mind that it won't work with popcorn ceilings or with chair rail molding.
Good points!
Gingerly dip shallowly to load the paint
iv seen this tool in the dollar store in the uk I'll defo be picking one up
Ha Ha Ha !!! If you can’t have a decorator, invest in good tape!!
My wife and I are painting our new home. We are using both. Very helpful. Can you reuse the brush?
Yes! We just wash the pad out and let dry fully. Congrats on the new home!
Why use it if you still get paint on the trim. Makes no sense
Exactly it’s b shit
Why did I get a pro edge your mom doesn't have wheels everybody keeps talking about Wheels I don't have wheels on mine
Never dip the pad!!! Brush a coat on the pad and then paint. Less chance of getting paint on the wheels.
Use a 3 inch roller
Yes, I have seen these and thought they would be garbage but I watched lots of videos and used a brush to apply the paint. I cant imagine dipping it.
Yes, This is what I did. I took a wooden paint stir and applied the paint to the edger with it. Worked great.
the baby 🤣
I think I’ll stick with my paintbrush and if I were you I’d throw that away and learn how to paint.
Simple solution... use a 2.5” brush and learn! Not speaking directly to you but everyone reading this comment. What’s the harm? You learn to appreciate the time and effort that goes into painting instead of using “technological advances” tools like this. Plus it’s fun and worth knowing.
Advance**
@@jonnydarrin *Ahole
These are not “technologically advanced” as you say. I have been using ones like this product for nearly 50 years here in Canada. I wouldn't even think to start painting a room without one. One can do a large living room trim in about 20 to 30 minutes. Awesome is what I would call them. The demo was very poorly demonstrated in my opinion. Watching this video, I would have never purchased my first one.
I painted my previous house from top to bottom, doing the edging with a brush. Looking forward to trying out an edging tool this time round. This is hardly a 'technological advance'... it's simply a time saver.
The results of an edging tool vs. brush changes depending on your current skill level and eye for what is an acceptable job. Years ago, I didn't know the differences in brushes or how much paint to load onto it, so the tool was a godsend. I didn't really care that often the paint didn't go all the way to the corner, because at least it was a straight line.
But after a lot more experience and learning that using a brush can get you much more precise results, and I don't use the pad unless the need for speed > precision.
People are so ugly. All these rude comments. Wow.
All these stupid gadgets gimme a paint brush roller drop and a gallon of paint... that thing is junk yea sure clean line.... Just do it the right way watch some videos on how to paint with REAL tools...
Was the paint on the trim and it didn't get right up to the molding crevasse? Really and you are diy...ing this item? And quote we are going to repaint the trim... Wasn't that the reason for using this tool.
Maybe they want to change the color of the trim.
I'm a painter and I used it whatever you do wheather you brush it on or dip. The worst tool ever. A 2.5 brush works the best
proffesional opinion, dont buy any of this useless junk
Thank you for your opinion. We know these tools aren't for everyone.
I’m terrible at cutting in so I have found the red one from shurline quite usefull. Can a pro or even a lot of diyer’s do a better job and faster with a hand brush I would think so, but I have tried and I can not or just do not care to learn. Most likely the latter
because it hurts biz *ROLLSEYES* ok Karen its actually not bad i just bought something similar.
The stupid gallon spout lid thing hahaha the can came with a lid lol
The edge tools really suck. Its faster to tape and paint as you go.
A real painter doesn’t need tape. Just a good brush and a steady hand
@@dirkdiggler9379most of use aren’t real painters we’re just diy home owners saving money
Talk to a painter and see if it’s in their toolbox. Probably not.
True, but this is intended to help everyday homeowners get good results on their own. I've had issues with blue painters tape not sealing properly and cutting in with a brush is an art. I've used the Shur-Line version of the paint pad for years and have painted entire houses quickly and get great results.
Definitely not 😂
If you aren't a painter, not sure why you would expect to get the precision they get with a brush. It isn't marketed to professional painters. I assumed that was obvious, apparently not obvious to all.
Why have two edgers ? Make up your mind
what a joke
Paint your white trim first rookie
Yup
😂
Absolute rubbish
man the tool is only for cealings
No no no and another no 😣😣
Junk