I appreciate your hard work on the video while you did this also...you do good work on both...Thank you again for this Steve Rob....now I can fix mine fore sure...Peace to you and yours...and a good day.
That belt looked really well to have five years of usage Steve. I just changed by drive belt for the blades on my riding mower about two weeks ago. Your didn't look too bad of a job to change whereas I've got to pull the entire deck out :) Now you're good for five more years :)))
Love my 12 volt Milwaukee 1/4 inch Ratchet. Use it always and glad to see you using one. It is my number one ratchet and i have way to many nice Snap on Ratchets & tools.. Nice Video.
I will show how much grass I cut with it this summer and I think I was off a bit , probably a bit more than an acre LOL Its one hour of non stop cutting and loving it. HAHA
that mower looks good for the workout you gave it and a new belt and its like a timex it keeps on working....very good for the ones that are scarred of this type of job....SALUTE
Bruce Pender Lift hahaha. Steve's small engine repair. Good job. I myself am not a fan of self propel stuff but now that I am not as young as I used to be they are becoming more attractive. That wear spot may be just stuff flying around in there too.
The wear mark will be from belt slack , a pull belt with no idler will wip on the slack side if it gets to worn next would be it jumping off a pulley but you replaced it before it done that.
Great vid Brother. So now ya gotta stop at the curb a few times for some of those sidewalk stories and resurrect a few. Show a pull cord repair. In this vid Steve's gonna repair a mower he picked up and after he repairs it, he's gonna give it away. Only thing ya gotta come ta Canada ta get it.
20acres? And the lawn mower keeps going. Nice. Always working ... Steve. Very busy, cleaning, changeing those belts yourself... :-)) For me it would be super hard to do it. :-))
Bruce Pender lift? WTH? LOL You need to take a riding mower up their! Do you sharpen your blades? I do with my hand grinder in a vice. TIP, if you spray PAM cooking spray under their on the deck before you mow you can just wash off the clippings easy. They can't stick. Just came to me sorry I had to say it. Looks like a belt keeper spring. You drained all the gas and fuel out of it? It takes both? LMAO.... I just love these small type videos. They are really helpful to most folks. Talk dirty Steve! LOL
Dwight the belt still worked but I thought Id change it and kept the old one for a spare. Didn't look that wore after all the grass cutting over the years.
i have a husqvarna 22'' with 7 3/4 hp kubota kholer engine 2 years old but im looking into a Kubota W821SC with solid shaft drive instead of belts from UK wich it cost $999.00 wich im planing hopefuly perchuse in the feature or a WG14-36 wich coost $3,923.00from olsan power equipment US
yeah the husqvarnas parts got joined with kubota because kubota parts are on market selling the cheapest price then other brand parts in the market wich kubota is growing more every year
Jim when I seen Bruce with his I just had to go to Princess Auto and get one. It's a terrific help with small engine repair and I weld on it as well to get in the right position. It also matches the height of my pickup to unload and load heavy items.
Hi Steve. Much Beer tonight. This what I hopefully never have to do. Shit you have totake the plade off............oooh I see muuucg spelling mistakes..good thing I;m drunk so I don't care Lol
cool. I'm busy cutting grass at this time of year, nice to know the way its done, very well done
Thanks buddy and a lot of grass cutting next week at the camp. One acre for sure. Cheers
Great job Steve. I have got to get around to replacing the belts on my rider. Nice work on the R&R mower belt
Thanks Lloyd I wasn't sure how to do but it was quite easy . Cheers
Man your garage is so organized !!
Thanks you !!!
Fine job there Steve, looks like she is ready to go to work. : ))
All I need now is some grass to cut. Next week for sure. Cheers
"If in doubt pry it out", man that cracked me up. Nice smooth work there Steve.
Wyatt cursing at it works too. LOL
I appreciate your hard work on the video while you did this also...you do good work on both...Thank you again for this Steve Rob....now I can fix mine fore sure...Peace to you and yours...and a good day.
👍
That belt looked really well to have five years of usage Steve. I just changed by drive belt for the blades on my riding mower about two weeks ago. Your didn't look too bad of a job to change whereas I've got to pull the entire deck out :) Now you're good for five more years :)))
I was surprised how good it lasted too. A lot easier the next time. Cheers
Good job Steve ! Five years on a drive belt is really good !
Thanks I thought so as well. Great little mower.
Good one there buddy!
Lawn mower need some TLC thats for sure!
Its amazing it's lasted so many acres but it has and it's impressed me all to hell. Cheers
Love my 12 volt Milwaukee 1/4 inch Ratchet. Use it always and glad to see you using one. It is my number one ratchet and i have way to many nice Snap on Ratchets & tools.. Nice Video.
Thanks I like the milwaukee brand , very reliable.
I love cutting grass Steve cause its gardening with an instant fix! But 1 acre 20 times a year might be too much 😂
I will show how much grass I cut with it this summer and I think I was off a bit , probably a bit more than an acre LOL Its one hour of non stop cutting and loving it. HAHA
just put mine away for winter. Nice job buddy
Thanks buddy . nothing to say you can't fire it up and try it out with a bit of snow. Hint Hint. LOL
Say no more, say no more.
MostlymoparIH wink wink :)
Funny you made a video on lawn mowers and mine is sitting on my workbench in pieces. LOL
Well I can't wait to see that vid. LOL Go for it buddy
that mower looks good for the workout you gave it and a new belt and its like a timex it keeps on working....very good for the ones that are scarred of this type of job....SALUTE
Its an easy job if you have a big hammer. LOL
Wow Steve, That's a monster mower! Awesome!
It works great for the amount of grass i've put thru it.
STEVE ROB Treating the underside of the deck was brilliant Steve.
Nice job Steve!
Thanks buddy
Jenny has been pushing my mower for more years than that and she still has the same belt.
They don't make em like they used to , better hold onto that Jenny LOL
Looking forward to the next belt change in 5 years!
HAHA so am i Thomas.
Beautifully done my friend! 17:50 I would have had the hammer out just to take it off.
My go to tool is the hammer too but I like roughing it at times . LOL
Steve, every time I watch one of your videos you cost me money. Just ordered two new belts for my Exmark mower. They have been on there for 10 years.
HAHA well Rick it's a good reminder to change out a belt before it brakes. There ya go buddy. LOL
Bruce Pender Lift hahaha. Steve's small engine repair. Good job. I myself am not a fan of self propel stuff but now that I am not as young as I used to be they are becoming more attractive. That wear spot may be just stuff flying around in there too.
Well I only like the rear drive mowers as going up hills it works compared to front drive wont. Everybody likes the Bruce pender Lift. LOL
The wear mark will be from belt slack , a pull belt with no idler will wip on the slack side if it gets to worn next would be it jumping off a pulley but you replaced it before it done that.
This design seems to work and all the grass I cut it's a great idea.
Great vid Brother.
So now ya gotta stop at the curb a few times for some of those sidewalk stories and resurrect a few. Show a pull cord repair. In this vid Steve's gonna repair a mower he picked up and after he repairs it, he's gonna give it away. Only thing ya gotta come ta Canada ta get it.
Thanks , lots of mowers up here including blow snowers 😎
20acres? And the lawn mower keeps going. Nice. Always working ... Steve. Very busy, cleaning, changeing those belts yourself... :-)) For me it would be super hard to do it. :-))
Easy job once you do it. I wonder what you fix around the house. LOL
Well, not much ....LoL ...I do other things... :-))
Cub cadet makes a good machine I have the riding mower with the 42 itch deck 👍👍🍺
Have to agree and this one sure has cut a lot of grass.
The Far Side Of The Rails I
Bruce Pender lift? WTH? LOL You need to take a riding mower up their! Do you sharpen your blades? I do with my hand grinder in a vice. TIP, if you spray PAM cooking spray under their on the deck before you mow you can just wash off the clippings easy. They can't stick. Just came to me sorry I had to say it. Looks like a belt keeper spring. You drained all the gas and fuel out of it? It takes both? LMAO.... I just love these small type videos. They are really helpful to most folks. Talk dirty Steve! LOL
CC72, that's probably what's wrong with mine. I've only been putting gas in mine.
Thats the name I guess LOL Lots of good tips buddy , I should mention them hahah Cheers Buddy
I wander if my Sears is the same, it is ready to have the belt change..
Dwight the belt still worked but I thought Id change it and kept the old one for a spare. Didn't look that wore after all the grass cutting over the years.
Great little How-To!!!!
Thanks Mike . Take Care buddy.
i have a husqvarna 22'' with 7 3/4 hp kubota kholer engine 2 years old but im looking into a Kubota W821SC with solid shaft drive instead of belts from UK wich it cost $999.00 wich im planing hopefuly perchuse in the feature or a WG14-36 wich coost $3,923.00from olsan power equipment US
Michael Mac Tavish Husky builds some excellent equipment . They use a hydrostatic transmission I believe.
yeah the husqvarnas parts got joined with kubota because kubota parts are on market selling the cheapest price then other brand parts in the market wich kubota is growing more every year
Steve, shouldn't there be an idler pulley on that to take up the belt slack?
Apparently not, I didn't see one either. Works great, Cheers
I am here to support you. Yeah little lube will do wonders ! :D
Terrific Paivi your such a nice person. Cheers
You forgot to say, "and there's your dinner ". Where's Junior? Sorry wrong channel. KIT d
HAHA well there's your beer. You're on the right channel now. LOL
I got to get one of those Pender lifts .
Jim when I seen Bruce with his I just had to go to Princess Auto and get one. It's a terrific help with small engine repair and I weld on it as well to get in the right position. It also matches the height of my pickup to unload and load heavy items.
Hi Steve. Much Beer tonight. This what I hopefully never have to do. Shit you have totake the plade off............oooh I see muuucg spelling mistakes..good thing I;m drunk so I don't care Lol
HAHA were both having fun then LOL
First comment hehe
HAHA glad to see ya buddy
5 years cutting 20 acres isn't bad for a Chinesium mower from the homeless despot.
I would have never thought it either but it's a great machine. I never thought the belt would last so long either.
a hammer can solve everything if it doesn't all you need to do is get a bigger one
I agree and all the auto channels I watch all started off on hammering the hell out of everything , a hammer is the techs first choice . Cheers mate
MC says It's Hammer time.
I finished season 3, warranty ended, belt broke. Please figure it out before you make the video...
Got a lot of acreage cut , belt just stretched out so I changed it.
Cool
Thanks buddy.
They do build them to last.
At least this one has been a great mower.