The servo connection of the pulling wires could have been done a little better, but I hope they will work anyway. Thank You, I hope the first flights go well. 👍
We'll see what I can get out of this glider. :) I think I found a lighter battery for the nose, so I reduced it a bit to achieve better thermals. Thank You for your comment! I hope that You enjoy your BAMF gliders too!
Hi, there are four channels for the four servos. Of these, 1 servo is the elevator, 1 servo is the side rudder and 2 servos are the aileron. The ailerons occupy two channels, the throttle and the brake. Yes, it's a bit complicated to describe, but I tried. On my radio, approx. There is room for 8 flight modes and these must be marked for each flight mode, which aileron should be deployed. In English, you have to build the program thinking about the different movements, what you want, what happens when you press a lever or switch. There are many different types of programming, almost everyone has a different way of controlling and switching and activating flight modes. I couldn't find a suitable program anywhere either, so I made one for myself, the logic of which I know. After that, you always copy that one program to your machines, just modify them a little. The point is that you have to play with the - and + directions so that when you want to brake with the ailerons, both wings have to move down. I was also able to achieve joint movement by trial and error, because it doesn't matter what mode the remote is in (mode 1, mode 2), and the AETR sequence also affects what happens. It's hard to describe it this way, but maybe someone here on YT has already made a video about it. Maybe here: ua-cam.com/video/mFxP_WRzsNM/v-deo.html&ab_channel=DavidJust
I just see it in this video from 0:20. ua-cam.com/video/OooHBJEyYK8/v-deo.html&ab_channel=JWFPV He used some TESA tape on the fuselage under the nose cone (in front of the wings). It just clicks and fixes the nose cone. I like it very much.
Приветствую. А как получилось сделать флапероны (режим тормоза) на 4-рех канальном приемнике? 1 канал - элероны, 2 канал - стабилизатор(элеватор), 3 канал занят питанием, 4 канал идет под рудер.
Приветствие! К четвёртому каналу был припаян разъём, но это можно решить и без пайки с помощью Y-сервокабеля. Таким образом, приемник получает питание по 5 каналам.
Thank You! Very good servos for this price. I didn't think it was that much. It took a bit of fiddling to get them to fit in the Mini Dart 2, but I think they worked for me.
Hello GoldenFish! :) Én is épp ennek a típusnak az építésében vagyok. A szervókat nagyon szét kellett farigcsálni, hogy beférjenek? Mindegyiket uannyira kellett? Válaszod köszönöm előre is!
Szia. Igen, én mind a négy alját leszedtem, majd összeszigszalagoztam (elektronika rögzitése a felső maradék szervóburkolathoz), hogy be lehessen csukni a "kabintetőt".
@@SupraBp1 Úgy emlékszem, hogy a kisebb, rövidebb szervó karokat használtam föl (négy ágú, ebből levágtam hármat), amelyeken alapból csak egy db luk volt. Kb. 0,6cm a hosszuk. Azt hiszem, hogy kellett valamit mókolni, hogy elférjenek, talán fejjel lefelé kellett őket a motorra tenni...egy pici CA -val talán rögzítve, hogy le ne essenek menet közben.
Hi! What do you mean by complete setup? I have a (4ch DLG) program on my transmitter and I configured it onto my glider. There is a description on the "Hyperflight" site to set up this glider for flights. I do not konw that it could help You.
Looks a nice and neat install. Nice to see the servos you've used appear to centre nicely. Hope you enjoy your nice and very shiny MD2 😍😎👍
The servo connection of the pulling wires could have been done a little better, but I hope they will work anyway. Thank You, I hope the first flights go well. 👍
looks great! All the best on the maiden :) sunny skies amigos
Thank You very much! I wish You nice flights too!
Beautiful 🐦
Thank You!
I am looking forward to your 'record' thermal flights!
We'll see what I can get out of this glider. :) I think I found a lighter battery for the nose, so I reduced it a bit to achieve better thermals. Thank You for your comment! I hope that You enjoy your BAMF gliders too!
@@goldenfish77 yes - just need some better weather on the days I can fly!
@@bracesport
In any case, these days are only for testing, the real experience flights are at other times.
Hi mate, nice build. How do you program the two aileron servos to work either together (for brake, thermal mode etc) , or opposite for banked turns?
Hi, there are four channels for the four servos. Of these, 1 servo is the elevator, 1 servo is the side rudder and 2 servos are the aileron. The ailerons occupy two channels, the throttle and the brake. Yes, it's a bit complicated to describe, but I tried. On my radio, approx. There is room for 8 flight modes and these must be marked for each flight mode, which aileron should be deployed. In English, you have to build the program thinking about the different movements, what you want, what happens when you press a lever or switch. There are many different types of programming, almost everyone has a different way of controlling and switching and activating flight modes. I couldn't find a suitable program anywhere either, so I made one for myself, the logic of which I know. After that, you always copy that one program to your machines, just modify them a little. The point is that you have to play with the - and + directions so that when you want to brake with the ailerons, both wings have to move down. I was also able to achieve joint movement by trial and error, because it doesn't matter what mode the remote is in (mode 1, mode 2), and the AETR sequence also affects what happens. It's hard to describe it this way, but maybe someone here on YT has already made a video about it. Maybe here: ua-cam.com/video/mFxP_WRzsNM/v-deo.html&ab_channel=DavidJust
The beautiful DLG, congrats! When is the maiden flight?
Thank You! I see that the weather is calm today, but a little wet. I give it a try... ;)
Thank you. I have the same one now. How do you fix the nose cone during flight?
I just see it in this video from 0:20. ua-cam.com/video/OooHBJEyYK8/v-deo.html&ab_channel=JWFPV
He used some TESA tape on the fuselage under the nose cone (in front of the wings). It just clicks and fixes the nose cone. I like it very much.
Приветствую. А как получилось сделать флапероны (режим тормоза) на 4-рех канальном приемнике? 1 канал - элероны, 2 канал - стабилизатор(элеватор), 3 канал занят питанием, 4 канал идет под рудер.
Приветствие! К четвёртому каналу был припаян разъём, но это можно решить и без пайки с помощью Y-сервокабеля. Таким образом, приемник получает питание по 5 каналам.
@@goldenfish77 Спасибо вам большое, я как-то сам не додумался до этого. Будем тоже пробовать.
Noice 👌Are you happy with the ES9051 servos? Are they a straight fit?
Thank You! Very good servos for this price. I didn't think it was that much. It took a bit of fiddling to get them to fit in the Mini Dart 2, but I think they worked for me.
@@goldenfish77 thank you!
Also was there any cutting involved in the es9051 itself?
I removed their lower covers and wrapped them with tape to secure the motor and keep dirt out.
Good luck with the maiden flight.
Thank You! I hope I don't get caught.
Hello GoldenFish! :) Én is épp ennek a típusnak az építésében vagyok. A szervókat nagyon szét kellett farigcsálni, hogy beférjenek? Mindegyiket uannyira kellett? Válaszod köszönöm előre is!
Szia. Igen, én mind a négy alját leszedtem, majd összeszigszalagoztam (elektronika rögzitése a felső maradék szervóburkolathoz), hogy be lehessen csukni a "kabintetőt".
Értem, köszönöm szépen! A szervó karokból se faragtál? Valahol olvastam, h abból is kellett. 🎉
@@SupraBp1 Úgy emlékszem, hogy a kisebb, rövidebb szervó karokat használtam föl (négy ágú, ebből levágtam hármat), amelyeken alapból csak egy db luk volt. Kb. 0,6cm a hosszuk. Azt hiszem, hogy kellett valamit mókolni, hogy elférjenek, talán fejjel lefelé kellett őket a motorra tenni...egy pici CA -val talán rögzítve, hogy le ne essenek menet közben.
super!,,hello friend could you tell me where I can find all the complete setup. thank you very much in advance¿
Hi! What do you mean by complete setup? I have a (4ch DLG) program on my transmitter and I configured it onto my glider. There is a description on the "Hyperflight" site to set up this glider for flights. I do not konw that it could help You.
Thank you very much for answering, I'll try it myself!