I was going to write a whole big story of my Anbernic mess of a story, but i'm going to keep it simple. Your videos are awesome. You're awesome and this video brought my handheld back to life thank you lol.
man youre doing awesome! Everybody whos into this should take some time and appreciate you for using so much time and energy for all this! I will Join your Discord after i took some time to get familiar with my new devices!
Just got my rg35xx H shipping notification 😊 excited! Great guide, I read the website version and this helped me make even more sense of it, thank you!
Swear to god everyone says a different thing. Batocera, kalli os, stock, muos or others are either mandatory or garbage, I feel the community is very scattered currently
I’ve tried them all, and I’m always a fan of cfw, but simply for this device, the newest stock os just works so well it’s not worth changing it. I recall hearing that an issue in the cfw community with the Allwinner H700 is they don’t have an open source gpu driver for it. I’m starting to wonder if Anbernic has the driver and that’s why they’re using the H700s… so they control the firmware more. My 2 cents
@@therealchriskirk From what ive been getting from research deviating from stock os now in may of 2024 is only useful if you want specific little things like better certain kinds of emulation or to make portmaster stuff work better. i cant believe anbernic discourse is worse than R36S discourse right now too, it's insane how centralized the internet is but how gatekept all the good info is on these open source consoles
@@StarmenRock I have tried them all and the main problem I come across is you have to spend hours and hours after install to set everything up to work how you want it to work and things still don't work how you want them to work. If you look at the latest Stock OS for H you copy over the roms and your done. Everything works. I have not come across any game on stock where it didn't work.
@@mohrasher thats what im going for too probably, just really wish we could use portmaster on stock os. Its the only missing piece in the whole equation, im just not too upset over that because i also have a psp for those games and also bought an r36s for 26usd on ali which runs portmaster better than the rg35xx. Thanks for your perspective on the subject!
I have a doubt: as it appears that now they tend to have a kioxia 64gb for the SO, so maybe isn't necessary to swap to a new one, my doubt is: can i just add another microsd in the other slot with MORE roms and the system will combine the ones of the 64gb stock with mine? And it would be as simple as to use the exact same folder stucture than the stock one?
Ok thank you. The 2024 model had me all messed up. Had to use the Firmware download for the plus! Thanks a ton for the information. I was so scared of the stock sd card crapping out at any moment since i had 2 friends that the card died day 1
Thanks, this was a comprehensive guide no BS, I have the H a month already but now a I know how to properly use it, although I may have to revisit the video 😅
Rufus is not partitioning my card properly and the drive is only showing 2 gb out of 64gb card, I've been trying to flash the card for hours but nothing is working, my rg35xxh is now a brick
I've switched to knulli, but still have the original sd with stock OS. Too bad it dont update via internet. PS: The playstation missing folder in the roms folder is because anbernic named PS, had to be PSX.
I just got the RG35XX Plus, 1st off it doesnt turn on but it charges. I tried all the reset stuff that ive read on reddit. Also i completely dont understand that whole flashing and downloading os to the sd cards. I literally almost started crying cause im frustrated and dont understand, even after watching all these youtube videos. Why couldnt it just be completely ready when i bought it 😭😭
Hey there, thanks for your videos and the great work. But i´ve still got a question - I want to setup my RG40XX H with two SD-Cards just as in your case, but i can only find 16GB firmware on the site, there is no 64GB version, unless I am blind😅 Is there any disadvantage in using the 16GB firmware on the 64GB card, since I can´t use the remeining storage anyway?
bro. THANK YOU for this video!! I been trying to watch other videos on how to update and run a 2-sd card system but this one was the best. I actually ended up deleting windows on my pc and had to get it repaired but this vid did me justice!! now I can play my RG35xxH in PEACE!
Hi! I'm currently running 2 sd cards build (64gb for OS and 128gb for ROMs) and planning to download the latest firmware for my RG35XX Plus. Do I need to do anything to my 128gb sd card or is it good to go once I've gotten the new firmware on the 64gb?
Is there a SUPER explained step-by-step video for people like me who don't know anything about any of this and just got the RG35XX cause it looked cool?
Can I use the plastic thing on my laptop it has a slot like that wich came with the micro sd card or do I need that stick flash drive micro sd reader thingy a bobber 😅because the regular plastic thingy I tried using that with the 32diskimager and I tried rufus nothing works pls help
I'm really struggling and need a lot of help. I am not computer savvy at ALL I'm 23 and feel like I'm 80. When I got my RG35XX H and turned it on it only flashes the logo screen. I emailed Anbernic and they sent me a video that wasn't in English. I did my best to follow instructions on it but ended up formatting the unbranded micro SD card it came with, without backing anything up. I bought the 2 micro SD cards you recommended in this video, and have an adapter but I don't know what I'm doing and don't want to mess up. Do you think you could help me? ;; I can't get any help from Anbernic and I don't understand any of the steps here with my situation. I feel really stupid.
Hi, my rg35xx has dual system. I don't wanna use the existing SD 64gb card that came with it. I tried clone it but it's so difficult because my win10 got very defensive at everything I did. Now I decided to just download the large update on anbernic site. I wonder if those zip files would appear afew zip files. Now if it do appears a few then what should I do? Do I write them multiple times into new SD card?
Hey everyone, does anyone know why does he say "against my wishes" for backing up the roms that come with the device in 8:06? (I'm a total noob and am just trying to make sure the device is at its best)
I'm just guessing it's because theoretically the ROMs in the US would be "illegal". Since they were put on the card in a different country it's not a huge deal. Doing it here is a bit of a moral conundrum. Nintendo can go after anyone at anytime nowadays it seems too, especially putting it on a UA-cam video. I got the 28xx and it has no Nintendo games on it,which I found interesting. I'm going to grab a 40xx here at the beginning of next month. Not a fan of the Cube and can't afford the newest best ones. They cost about as much as a Nintendo Switch lol.
@@JoeysRetroHandhelds Thanks bro I'll try this... Another thing I don't get is I flashed the 16gb IMG of the Stock OS on a 64gb micro sd card, installed OK, all roms bios etc... folder created OK, but then my card appears in Disk Utility with partitions using a total only 15gb, leaving 50gb free that seem unusable even for roms and that don't even show in Disk Utility. I can't change the size of any partition. There's still 4gb usuable in the card where the Stock OS is installed but where is all that free space ? I should be able to use it instead of a second micro sd, no ?
I cannot figure this out for the life of me. My device would partially boot up, but not fully. It was just stuck on the loading screen. After putting the stock SD drive into my computer it said "disc damaged". So I tried installing the OS onto a fresh SD drive and my system will not boot. When using rufus I did not see .img file in the boot selection and when I tried select I didn't see it there either. Can someone please help me?
my RG35XX H is up to date but will not charge to full capacity. I've done numerous things to try to get it to charge, shutting it off and plugging it in seems to be the best but when the battery symbol comes on it begins to charge for a few seconds and then stops. What could be the issue? Please help! Thanks!
It was super easy to install: RG35XXH V1.1.0 (20240428 ) Change log: - Optimize psp performance - Move apps to App Center - Add N64 emulator. - Add RA emulator ATARIST, AMIGA, AMIGA32CD, C16, C64, C128, VIC20 - Update gpsp, mgba core to support interstellar good dog vibration - Add vba-next core
I messed up Joey! Forgot to copy the BIOS folder before I wiped my stock SD card to update it to the latest firmware. Ordered a new SD card which should be coming in by the weekend but wanted to do a test run. Is there anywhere I can find the OS stock files online?
After flashing via 64gb, i am not able to see anything on the console. It's just blank. But when I flash 16gb firmware on 64gb sd card I am able to see the options as soon in the video . Please let me know the issue ?
Can you guys help. I've flashed the dual system images its okay. But when i flashed the newest patch it doesn't work at all the console won't even turn on indicator of bad images in the sd . But when i flashed it back to the stock os its working . So i guess my case is not bad sd card but the way i flashed it wrong. I've used yumi, rufus, & win32disk bootable maker . All seems not working. Help a brother out
know im a bit late to the party but can anyone give any input on the portability of the 35xx h vs the pocket flip?? ive been thinking about replacing my miyoo mini v3 with something like the 35xx h, but i already own a pocket flip and from what i can tell the footprint and weight of the pocket flip is very similar to the xx h but with the 5'' screen basically slapped on the front. is the size/weight of the pocket flip really significant over the xx h?
On stock on any of my XX devices I can't get auto load save state to stick. I turn it on in RA settings and then save the config file, but it always turns itself off. Any idea why? It is the same on my 28xx, 35xxH, and Plus. Thanks
@@JoeysRetroHandhelds I have tried both. It always reverts back after saving the config file. I can get hotkeys to change, but never auto load. Right now I am only running stock on my 28XX while waiting for MuOS to release.
Fantastic guide, thank you! I'm trying to make Neo Geo CD games work on the RG35XX H but for some reason the option to select the system doesn't appear on RA Game. The games are chd format on the neocd folder, the bios are also on a separate neocd folder inside the bios folder but still nothing shows up for NGCD. I noticed that it doesn't seem like there's a Neo Geo CD core available so I wonder if you can't actually play that system on the RG35XX H?
Great video 👍🏻 Btw, Any idea how to backup the games that is saved under “Favorite” listing ? My saved favorite list of games gets wiped out once i’ve updated the firmware using two memory card method. thanks.
is this should update from scratch and installation in future update?why not available in OTA update?very suffering if every update must dowbnload 60GB++
having trouble after cloning my new sd card i was following your steps everything seemed to work great, cloned successful but wasn't able to extended my partition i did like you said clicked yes etc etc but the size never changed , also when i plug it into the rg35xxh it wont turn on but turns on with the old junk sd card any ideas would be great tia
@@JoeysRetroHandhelds oh so the first card can't be more then 64 gb ? also would you know why the system wont boot with the new card? it wont even turn on
@@JoeysRetroHandhelds that is a shame lol! i would love to get rid of this crap sd card haha well can i use diskgenius to wipe the new 128gb sd card back to how it was before i cloned it? not entirely sure how to though sorry for all the questions very new to the retro scene thank you for the replies as well
@@jones9oh5 You can use the modified stock OS if you want a single card that expands, that's in the description. To clear the 128, reflashing anything will or just format it in Windows to something.
When you get a prompt on android devices when you put in a new loaded sd card asking if you want the sd card to be used as a storage device or for a file transfer device, what option is the best?
I thought filling SD Cards to the brim is not good for the SD cards? Should I have got a 128Gb card? I wouldn't mind TBH, I think they were only like $20 (CAD).
The music player works well; you put your file in music folder and put .MP4 files in the videos and it just works. I enjoy those features and you will too! 😊
I dont know how much of a big deal this is, but the latest update only offers the 16GB version and even if I try to download it, there's no IMG file after Ive extracted it. Did I do something wrong?
Hello! Just a quick question. I swapped the SD cards and updated the system successfully based on the video provided. I then downloaded GTA: CTW and was playing for a week but I noticed it started crashing lately (midway in game it goes black then I get the ‘Exiting’ message and I’m back to the PSP game selection page). May I know if it’s possible to transfer my save files from the current game that keeps crashing to a newly downloaded ROM of GTA: CTW without having to restart again? As far as I know, the save files are in the memory card but when I tried starting the new GTA I downloaded from another website, no save files show up
@@JoeysRetroHandhelds I am trying to port my pokemon save with a ton of hours on it to this new version and I cant get mGBA to load my saves. Please help!
joeysretrohandhelds.com/guides/starter-guides/how-to-clone-your-sd-card-for-retro-handhelds/ As long as you're cloning from the 64GB to a 64GB, you can use this.
Note: Unfortunately, you can't clone the 35XX/28XX series cards. You will need to flash a new card completely following the video.
What are the exact stepts I could do? I'm confusing right now
Follow the video, ignore the section about cloning.
@@JoeysRetroHandhelds Can I utilize the same SD Card branded used before and where I cloned the files into?
@@gianxvi Yes, flashing stock firmware will overwrite.
@@JoeysRetroHandhelds Ok, thanks a lot!
I just received my RG35XX H. After few hours of testing I can say that stock OS is surprisingly good!
Mine won’t start you know what’s wrong with it
@@SamuelLonghenry bad SD card
installed Knulli and love it!
@@SamuelLonghenry did you ever fix this? Just opened mine in the mail, and same issue.
@21:00 undo load/save state is GOLD. Didn't know that, what a lifesaver!!
There has never been a better time for a guide since there are so many devices on this platform
I was going to write a whole big story of my Anbernic mess of a story, but i'm going to keep it simple. Your videos are awesome. You're awesome and this video brought my handheld back to life thank you lol.
Glad I could help!
So helpful
Hey thanks so much!
The best video about the RG35XX H, thank you very much!!! Saved me a lot of time!!
man youre doing awesome! Everybody whos into this should take some time and appreciate you for using so much time and energy for all this! I will Join your Discord after i took some time to get familiar with my new devices!
I appreciate that!
Just bought one 35xxH and you uploaded, instant subscribe. What a timing !
same with me!
Just got my rg35xx H shipping notification 😊 excited! Great guide, I read the website version and this helped me make even more sense of it, thank you!
I have the RG40xxH and the stock firmware update only had a 16gb folder not a 64gb option?
Love this guide. Thanks a lot mate 🙌🏻
Stock OS is the best for RG35XX H. I have even tried R11 of MuOS but stock still wins. Everything just works on stock.
Swear to god everyone says a different thing. Batocera, kalli os, stock, muos or others are either mandatory or garbage, I feel the community is very scattered currently
I’ve tried them all, and I’m always a fan of cfw, but simply for this device, the newest stock os just works so well it’s not worth changing it.
I recall hearing that an issue in the cfw community with the Allwinner H700 is they don’t have an open source gpu driver for it. I’m starting to wonder if Anbernic has the driver and that’s why they’re using the H700s… so they control the firmware more. My 2 cents
@@therealchriskirk From what ive been getting from research deviating from stock os now in may of 2024 is only useful if you want specific little things like better certain kinds of emulation or to make portmaster stuff work better. i cant believe anbernic discourse is worse than R36S discourse right now too, it's insane how centralized the internet is but how gatekept all the good info is on these open source consoles
@@StarmenRock I have tried them all and the main problem I come across is you have to spend hours and hours after install to set everything up to work how you want it to work and things still don't work how you want them to work. If you look at the latest Stock OS for H you copy over the roms and your done. Everything works. I have not come across any game on stock where it didn't work.
@@mohrasher thats what im going for too probably, just really wish we could use portmaster on stock os. Its the only missing piece in the whole equation, im just not too upset over that because i also have a psp for those games and also bought an r36s for 26usd on ali which runs portmaster better than the rg35xx. Thanks for your perspective on the subject!
I have a doubt: as it appears that now they tend to have a kioxia 64gb for the SO, so maybe isn't necessary to swap to a new one, my doubt is: can i just add another microsd in the other slot with MORE roms and the system will combine the ones of the 64gb stock with mine? And it would be as simple as to use the exact same folder stucture than the stock one?
That's what the manual for the 28xx says to do. I haven't tried it personally yet,but as far as I can tell that's the recommended method.
Ok thank you. The 2024 model had me all messed up. Had to use the Firmware download for the plus! Thanks a ton for the information. I was so scared of the stock sd card crapping out at any moment since i had 2 friends that the card died day 1
Thanks, this was a comprehensive guide no BS, I have the H a month already but now a I know how to properly use it, although I may have to revisit the video 😅
Rufus is not partitioning my card properly and the drive is only showing 2 gb out of 64gb card, I've been trying to flash the card for hours but nothing is working, my rg35xxh is now a brick
Amazing setup guide, saved me some hassle. Thanks
I've switched to knulli, but still have the original sd with stock OS. Too bad it dont update via internet.
PS: The playstation missing folder in the roms folder is because anbernic named PS, had to be PSX.
I just got the RG35XX Plus, 1st off it doesnt turn on but it charges. I tried all the reset stuff that ive read on reddit. Also i completely dont understand that whole flashing and downloading os to the sd cards. I literally almost started crying cause im frustrated and dont understand, even after watching all these youtube videos. Why couldnt it just be completely ready when i bought it 😭😭
if its not turning on i would contact the store or website it might be a faulty product,
Thanks ever so much Joey, I'm a newby to this and your video guided me through it all. I even installed Batocera which is a very big improvement.
"How do i put the memory card? Face up or face down? Halp" 😂 🤣
Just got a 40XXh and this came in handy. Good looks on making this video.
I just ordered one. Did yours come with branded SD card?
Thanks for your sharing. Very useful for me as a newbie in this retro game. ❤
Hey there, thanks for your videos and the great work. But i´ve still got a question - I want to setup my RG40XX H with two SD-Cards just as in your case, but i can only find 16GB firmware on the site, there is no 64GB version, unless I am blind😅 Is there any disadvantage in using the 16GB firmware on the 64GB card, since I can´t use the remeining storage anyway?
Great video! Thanks for the tutorial!
Mine 35xxH wouldn't go passed the boot screen as soon as I got it, hopefully following this guide is gonna help me.
I have a 35XX Plus on the way - will there be any issues with following this video if you're a mac user? Cheers!
bro. THANK YOU for this video!! I been trying to watch other videos on how to update and run a 2-sd card system but this one was the best. I actually ended up deleting windows on my pc and had to get it repaired but this vid did me justice!! now I can play my RG35xxH in PEACE!
This is awesome information but do you have a tutorial on how to do this if you are a Mac user??
can you make a tutorial how to connect the RG35XX H to a laptop?
I don't understand the question - you don't on stock, you connect the SD card.
Hi! I'm currently running 2 sd cards build (64gb for OS and 128gb for ROMs) and planning to download the latest firmware for my RG35XX Plus. Do I need to do anything to my 128gb sd card or is it good to go once I've gotten the new firmware on the 64gb?
Should be good to go.
Is there a SUPER explained step-by-step video for people like me who don't know anything about any of this and just got the RG35XX cause it looked cool?
Yeah, this guide lol
its not even showing up that i have it pluged into my PC but its charging
Great guide! That's worth a sub.
256GB card makes a lot of sense if you're going to do Dreamcast games!
Can I use the plastic thing on my laptop it has a slot like that wich came with the micro sd card or do I need that stick flash drive micro sd reader thingy a bobber 😅because the regular plastic thingy I tried using that with the 32diskimager and I tried rufus nothing works pls help
This shows how OnionOS is miles ahead of any other retro firmware/OS out there!
Thanks for the guide
I'm really struggling and need a lot of help. I am not computer savvy at ALL I'm 23 and feel like I'm 80. When I got my RG35XX H and turned it on it only flashes the logo screen. I emailed Anbernic and they sent me a video that wasn't in English. I did my best to follow instructions on it but ended up formatting the unbranded micro SD card it came with, without backing anything up. I bought the 2 micro SD cards you recommended in this video, and have an adapter but I don't know what I'm doing and don't want to mess up. Do you think you could help me? ;; I can't get any help from Anbernic and I don't understand any of the steps here with my situation. I feel really stupid.
The best setup guide
Hi, my rg35xx has dual system. I don't wanna use the existing SD 64gb card that came with it.
I tried clone it but it's so difficult because my win10 got very defensive at everything I did.
Now I decided to just download the large update on anbernic site.
I wonder if those zip files would appear afew zip files. Now if it do appears a few then what should I do?
Do I write them multiple times into new SD card?
what is the sd card reader for a macbook pro?
I just ordered mine but it did not come with Nintendo, super Nintendo, N64, gameboy etc.. installed how do i add them?? Thank you
I don't have a computer, is there any way to add box art using an Android phone ?
Hey everyone, does anyone know why does he say "against my wishes" for backing up the roms that come with the device in 8:06? (I'm a total noob and am just trying to make sure the device is at its best)
I'm just guessing it's because theoretically the ROMs in the US would be "illegal". Since they were put on the card in a different country it's not a huge deal. Doing it here is a bit of a moral conundrum. Nintendo can go after anyone at anytime nowadays it seems too, especially putting it on a UA-cam video. I got the 28xx and it has no Nintendo games on it,which I found interesting. I'm going to grab a 40xx here at the beginning of next month. Not a fan of the Cube and can't afford the newest best ones. They cost about as much as a Nintendo Switch lol.
What if I got console with out games?
Can't get my second card seen by the stock os. I use a sandisk 64go, I'm on Mac, tired both ms-dos and exfat format and none of them worked...
Manual and video says FAT32.
@@JoeysRetroHandhelds
No fat32 on mac, equivalent is either exfat or msdos…
@@fabiencazeau1506 Use a different program, I don't have a Mac, but there are programs that let you format as FAT32. Otherwise it'll never work.
@@JoeysRetroHandhelds
Thanks bro I'll try this...
Another thing I don't get is I flashed the 16gb IMG of the Stock OS on a 64gb micro sd card, installed OK, all roms bios etc... folder created OK, but then my card appears in Disk Utility with partitions using a total only 15gb, leaving 50gb free that seem unusable even for roms and that don't even show in Disk Utility. I can't change the size of any partition. There's still 4gb usuable in the card where the Stock OS is installed but where is all that free space ? I should be able to use it instead of a second micro sd, no ?
@@fabiencazeau1506 Nope, I talk about it in this video. You cannot extend the partition of the first slot with stock.
I have a card set with batocera for my h but went back to stock with the April 9th firmware update.
As much as I prefer the visual layout of something like Batocera, I like to play games when I pick up my handheld, not wait for the boot up.
I'm going to download this video and watch on my RG28XX for the kick
Hi. When updating the firmware, how do I maintain my favorites list? I just installed thr latest stock OS update and now my favorites is empty.
download the update but there is only a 16 g file for the update, what should i do ? use it? i have a 64 new card?
I cannot figure this out for the life of me. My device would partially boot up, but not fully. It was just stuck on the loading screen. After putting the stock SD drive into my computer it said "disc damaged". So I tried installing the OS onto a fresh SD drive and my system will not boot. When using rufus I did not see .img file in the boot selection and when I tried select I didn't see it there either. Can someone please help me?
Mine upon first turning on is stuck on this first screen that just says anbernic? I would say it’s frozen but i genuinely don’t know
my RG35XX H is up to date but will not charge to full capacity. I've done numerous things to try to get it to charge, shutting it off and plugging it in seems to be the best but when the battery symbol comes on it begins to charge for a few seconds and then stops. What could be the issue? Please help! Thanks!
It was super easy to install:
RG35XXH V1.1.0 (20240428 ) Change log:
- Optimize psp performance
- Move apps to App Center
- Add N64 emulator.
- Add RA emulator ATARIST, AMIGA, AMIGA32CD, C16, C64, C128, VIC20
- Update gpsp, mgba core to support interstellar good dog vibration
- Add vba-next core
I added my backed up save files and it wont give me the option to load them, any help would be appreciated
How to get Wi-FI running on the RG35XX Plus ? Settings are correct, but it never gets a connection. No update so far supports it.
I messed up Joey! Forgot to copy the BIOS folder before I wiped my stock SD card to update it to the latest firmware. Ordered a new SD card which should be coming in by the weekend but wanted to do a test run.
Is there anywhere I can find the OS stock files online?
I just bought one and all I want primarily is GBA Pokémon so I need to figure this out 😅 I’m not good with this
After flashing via 64gb, i am not able to see anything on the console.
It's just blank.
But when I flash 16gb firmware on 64gb sd card I am able to see the options as soon in the video .
Please let me know the issue ?
I'm using rg40xx h, can you tell me how to factory reset it??
Can you use a 32 gb as card ?
I wish this was simpler. I’m stuck on older computer hardware. This is all a nightmare.
The quality of video production is perfectly done on another level. Respectly superb quality of work, sir.
Is there anyway to do this on mac?
Can you guys help. I've flashed the dual system images its okay. But when i flashed the newest patch it doesn't work at all the console won't even turn on indicator of bad images in the sd . But when i flashed it back to the stock os its working . So i guess my case is not bad sd card but the way i flashed it wrong. I've used yumi, rufus, & win32disk bootable maker . All seems not working. Help a brother out
I just got my rg35xx h and when I turn it on it goes to the booting screen then it says exiting anbernic any advice
Follow the guide and reflash to a new branded SD card.
If I just want to add Roms can I just drag and drop on my MacBook Air?
Hi, I did the steps to clone the SD Card but now my Anbernic doesn't power on.
Hey, see the pinned comment.
if I have a 128gb card, can i use that for the 64gb thing? or does it HAVE to be 64gb...
also looking for this answer
yes, but the rest of that space wont be useable.
can i just copy all the folders from the original sd card and paste in the new one?
Mine just came in yesterday and researching all this is so over whelming lmao, i need someone to walk me through
only getting the 16gb option, but i have a 64 gb card. will it cause issues to run the 16gb file?
know im a bit late to the party but can anyone give any input on the portability of the 35xx h vs the pocket flip??
ive been thinking about replacing my miyoo mini v3 with something like the 35xx h, but i already own a pocket flip and from what i can tell the footprint and weight of the pocket flip is very similar to the xx h but with the 5'' screen basically slapped on the front. is the size/weight of the pocket flip really significant over the xx h?
I still cannot get Amiga to work on stock OS, I have to revert back to MuOS for Amiga games
where do the screenshots go when you take them? i can't find them. sorry i'm new to all this
Does this work for RG35XX SP? I think the SD card on mine has corrupted? Retroarch appears all green yellow blurry I cannot see a thing.
It does.
When i get the system can i just copy and paste the old files to a new fat32 sd card?
On stock on any of my XX devices I can't get auto load save state to stick. I turn it on in RA settings and then save the config file, but it always turns itself off. Any idea why? It is the same on my 28xx, 35xxH, and Plus. Thanks
Are you opening RetroArch from settings instead of opening a game and making that change?
@@JoeysRetroHandhelds I have tried both. It always reverts back after saving the config file. I can get hotkeys to change, but never auto load. Right now I am only running stock on my 28XX while waiting for MuOS to release.
did everythimg u said when i put in the new sd card the game do not load but when i put the card in my computer everything is there
Fantastic guide, thank you! I'm trying to make Neo Geo CD games work on the RG35XX H but for some reason the option to select the system doesn't appear on RA Game. The games are chd format on the neocd folder, the bios are also on a separate neocd folder inside the bios folder but still nothing shows up for NGCD. I noticed that it doesn't seem like there's a Neo Geo CD core available so I wonder if you can't actually play that system on the RG35XX H?
I don't believe that core is added yet.
@@JoeysRetroHandhelds oh that explains it then, hopefully they add it at some point. Thanks Joey!
what is wrong with the roms already on it
Great video 👍🏻 Btw, Any idea how to backup the games that is saved under “Favorite” listing ? My saved favorite list of games gets wiped out once i’ve updated the firmware using two memory card method. thanks.
I don't know of a way unfortunately.
After all the configuration has been done. What folders should I backup related to the OS config?
i downloaded the file to my computer but i dont have a 64 gb only a 16 gbfile
is this should update from scratch and installation in future update?why not available in OTA update?very suffering if every update must dowbnload 60GB++
having trouble after cloning my new sd card i was following your steps everything seemed to work great, cloned successful but wasn't able to extended my partition i did like you said clicked yes etc etc but the size never changed , also when i plug it into the rg35xxh it wont turn on but turns on with the old junk sd card any ideas would be great tia
Hey, you can't extend the partition of stock past 64GB for the first card. You're locked to 64GB.
@@JoeysRetroHandhelds oh so the first card can't be more then 64 gb ? also would you know why the system wont boot with the new card? it wont even turn on
@@jones9oh5 Correct, and you're the second person to say they've had issues cloning, so it may just not work for some reason.
@@JoeysRetroHandhelds that is a shame lol! i would love to get rid of this crap sd card haha well can i use diskgenius to wipe the new 128gb sd card back to how it was before i cloned it? not entirely sure how to though sorry for all the questions very new to the retro scene thank you for the replies as well
@@jones9oh5 You can use the modified stock OS if you want a single card that expands, that's in the description. To clear the 128, reflashing anything will or just format it in Windows to something.
When you get a prompt on android devices when you put in a new loaded sd card asking if you want the sd card to be used as a storage device or for a file transfer device, what option is the best?
Portable.
Does this method works on all RG system? Currently for me is RG Cube XX
I thought filling SD Cards to the brim is not good for the SD cards? Should I have got a 128Gb card? I wouldn't mind TBH, I think they were only like $20 (CAD).
What OS do I need for my RG40XX V so it can show me box art and a little preview video aswell ? Thanks !
Will this setup guid work with the rg40xxh or is there something better?
Do you have any tips for configuring buttons? So many games have the wrong set up at default
Thanks for at least showing that music player is an option. I’m gonna have to wait until mine arrives to see what it’s like to use though
The music player works well; you put your file in music folder and put .MP4 files in the videos and it just works. I enjoy those features and you will too! 😊
I dont know how much of a big deal this is, but the latest update only offers the 16GB version and even if I try to download it, there's no IMG file after Ive extracted it. Did I do something wrong?
Hello! Just a quick question. I swapped the SD cards and updated the system successfully based on the video provided. I then downloaded GTA: CTW and was playing for a week but I noticed it started crashing lately (midway in game it goes black then I get the ‘Exiting’ message and I’m back to the PSP game selection page). May I know if it’s possible to transfer my save files from the current game that keeps crashing to a newly downloaded ROM of GTA: CTW without having to restart again? As far as I know, the save files are in the memory card but when I tried starting the new GTA I downloaded from another website, no save files show up
it should work just move the save file into where the other game is saved.
What about 512GB mSD ?
I'm assuming this guide will work for rg35xxsp?
Should we delete the save files and bios from the t1 drive if we have them on the t2 drive?
You can, doesn't take up much space.
@@JoeysRetroHandhelds I am trying to port my pokemon save with a ton of hours on it to this new version and I cant get mGBA to load my saves. Please help!
Is there a way to just copy the data over from the crappy SD card it comes with to the new SD card? I’m having troubles following this.
joeysretrohandhelds.com/guides/starter-guides/how-to-clone-your-sd-card-for-retro-handhelds/
As long as you're cloning from the 64GB to a 64GB, you can use this.