amzn.to/2r1bkSp MicTunings Lights Homepage amzn.to/2qCmbkU The Size Light Used in this video amzn.to/2qzL0NM Soldering Station with Heat Gun amzn.to/2r0Q0fU Heat Shrink Assortment Kit amzn.to/2rABJ6z Self Stripping Wire Stripper
Thanks for the video. We cut 8 acres and have to quit when it gets near dark as I’m old and can’t see my mow lines. This looks like just what we need. Thanks again.
Fixing to get my first zero turn to upgrade from my 36” metro. Any advice would for maintenance would be appreciated. Probably getting an ex mark Lazer Z HP 48 inch. 650 hours
amzn.to/2r1bkSp These are the ones I put on they have been working great especially now that it is getting dark at 6PM. The only issue I had was the bolts holding the lights needed to be loctited, so they would not vibrate loose. If it is really dark out it would be nice to have a single small separate LED light on the trim side of the deck. If you trim around trees it is hard to see because the lights are out front.
Nice does it draw much power? What would it be like on the ROPS bar? N. Thanks for video the light kit that comes with Simplicity ZTM are no where near that bright!
doublewide6 Repairs LLC 1 year ago So far I have had no problems. I have used it about 10 times this year. I will definitely post back if there is a problem.
So many LED's (ya even "CREE" to), often "flicker" and / or will totally fail. I've soldered all my connections / and ALWAYS use a relay in the circuit, but still (sometimes), they FAIL. Where this remark is going is the WARRANTY !, "even in an Automotive application these fail / and FAIL rather often. One of the first signs is one LED failing (say in the "bar" example / and in my experiences), are a "flickering" / or UN-uniform light after awhile / and then others follow / failure occurs. "So what's the Warranty" ? ... LED's literally just "sip" currant, and are GREAT vrs. incandescent alternatives, but low-grade parts / a 'cheep build' can make all the difference. All the sudden your "SOL", and THEN where's the seller ? ... "just saying". Perhaps THESE are the EXCEPTION !? / GREAT CLIP / really LIKED / THX.
amzn.to/2r1bkSp MicTunings Lights Homepage
amzn.to/2qCmbkU The Size Light Used in this video
amzn.to/2qzL0NM Soldering Station with Heat Gun
amzn.to/2r0Q0fU Heat Shrink Assortment Kit
amzn.to/2rABJ6z Self Stripping Wire Stripper
do u have a link for the "marker" or what ever that was to label the relay?
Thanks for the video. We cut 8 acres and have to quit when it gets near dark as I’m old and can’t see my mow lines. This looks like just what we need. Thanks again.
Hey doublewide6. Has this light bar held up for you or have you had any problems in the last 5 years? Thanks!
You should wire one of the relay wires to the key switch so it only comes on with key on.
Thank you for the instructional video. Do you have a wiring schematic for this installation?
What an invention, those LEDs. Thanks, Bob, it came out great.
Yes, the lights are working great I'm getting much more use of them in the fall.
Fixing to get my first zero turn to upgrade from my 36” metro. Any advice would for maintenance would be appreciated. Probably getting an ex mark Lazer Z HP 48 inch. 650 hours
One of the best dyi videos I've watched. Good job explaining and showing how it works. God Bless!
Great vid, just ordered them for my machine. Please let us know if they stand the test of time. Thanks!
amzn.to/2r1bkSp These are the ones I put on they have been working great especially now that it is getting dark at 6PM. The only issue I had was the bolts holding the lights needed to be loctited, so they would not vibrate loose. If it is really dark out it would be nice to have a single small separate LED light on the trim side of the deck. If you trim around trees it is hard to see because the lights are out front.
i put led lights on my zero turn and love them!
I want to add a single LED to the trim side of the deck, so I can go around landscaping edges and see where the deck is when It is super dark out.
Nice does it draw much power? What would it be like on the ROPS bar? N. Thanks for video the light kit that comes with Simplicity ZTM are no where near that bright!
do you know the Watts or amps? Looks great
I have a ariens edge 34" with a 12 volt small battery 12 amp will it withstand led lights?
We have a smaller light on our zero turn. It's great to have. It slows traffic down a lot if I'm close to the road.
I believe that. Nice.
Any issue with battery going weak due to light bar?
This is exactly what I was just wondering myself.
doublewide6 Repairs LLC
1 year ago
So far I have had no problems. I have used it about 10 times this year. I will definitely post back if there is a problem.
@@QQTrick1QQ Cool thanks for replying.
@@HexaFox Better late than never =-)
Can you list wich harness and relay to buy?
Another great video from DB6.Thanks!
Thanks Man!!
Good Price on Lights, better than Walmart's Price-I have a Large One on my Big Red side by side and it will Light Up the World...
Just got mine but didn't come whit the harness and got mine for $55.58 :(I was hoping to install it today.
you can mow early in the morning.
neighbors wont like you .
lol
happy mowing
I'm using a lot more in the fall. Last week I was mowing at 7PM and needed the light for the last 15 minutes.
That light pulls 120 watts, is that compatible with a lawnmower's electrical system or will it overload?
So far I have had no problems. I have used it about 10 times this year. I will definitely post back if there is a problem.
I gotta do this!
You will love it. I just used it last week.
very nice job.
Does it drain the 🔋 battery when using
No there is no problem. I run it when the motor is on. There is also no flickering (an indication the light has constant 12V)
Great job
I love this channel
Cool!!
Nice light
I USE THIS
It works great an extra single led on the trim side of the deck would help.
So many LED's (ya even "CREE" to), often "flicker" and / or will totally fail. I've soldered all my connections / and ALWAYS use a relay in the circuit, but still (sometimes), they FAIL. Where this remark is going is the WARRANTY !, "even in an Automotive application these fail / and FAIL rather often. One of the first signs is one LED failing (say in the "bar" example / and in my experiences), are a "flickering" / or UN-uniform light after awhile / and then others follow / failure occurs. "So what's the Warranty" ? ... LED's literally just "sip" currant, and are GREAT vrs. incandescent alternatives, but low-grade parts / a 'cheep build' can make all the difference.
All the sudden your "SOL", and THEN where's the seller ? ... "just saying".
Perhaps THESE are the EXCEPTION !? / GREAT CLIP / really LIKED / THX.
You always go big or go home huh babes?