Excellent ideas. It seems that you have covered all the bases, except for good veneration. The exhaust fan is underpowered if you are trying to blow more than a few feet. The longer the run, the more power is needed. Air drag in the tubing is the issue, but that is an easy fix. Great design. I like your gridding idea, it is perfect, and the adjustable grid is brilliant.
Whow, I was so inspired that I adapted your sophosticated approach to the TwoTree Laser Model S2 ... and it works fantastically...greetings from Vienna
I wouldn't. It's pretty, but it's what's called safety theater. Extraction is insufficient to ensure fumes stay contained in the box and are properly removed through the hose, the clear plexiglass doesn't add any protection from the laser light (the shroud on the machine likely isn't high enough optical density to effectively filter the wavelength the laser is emitting) You're better off with no enclosure and putting the whole machine in an isolated shed, wearing a multigas respirator (about $30) and using a $20 sheet of high optical density acrylic as a portable eye shield for observation. If you don't have a dedicated shed or sealed room where you know people won't end up without PPE, a garage with some powerful shop fans directed to create a negative pressure with doors wide open to allow fumes to vent and don't let anyone enter the garage during use or for about half an hour after use without PPE.
I replaced the fan with a bigger one. Then it was much better than before. I chose transparent acrylic to make it easier to film the process. Therefore, color acrylic plates with a blocking function are recommended for those who make them.
I have watched probably 500 youtube videos but your is by far the best. Your creativity and abilities are astounding. I only wish I could have had you for a son or grandson so that I could have learned from you as you grew up. I'm in awe of what you have done here on this video. I have recently gotten interested in laser engraving so that I can sign my woodart. I wanted some way to do taller projects and you have shown me exactly what I needed to see. Thank you so much for your time.
I just watched this video again. I have to ask, do you ever make a mistake? Your plans, calculations and execution of build always seem to be spot on. Please tell us that you make as many mistakes as the rest of us. Thank you again for your efforts and these fantastic videos.
Yes, very often, I make mistakes too. I review my plans sufficiently to avoid mistakes as much as possible, and keep checking them from time to time while working. Thank you for liking my video. See you again with a better video.
First I was thinking (yep I can do that too ;-) ) what is that all about that box? But man that is clever. I think, the moment others stop is where you start to think. Absolutely ingenious :)
La caja ha quedado estupenda, muy buena la forma. Pero la mayoria de la gente en su casa no puede hacerla. Deberia de poner, hecho en taller de carpintería. Aparte de eso, esta genial.
Fantastic job. I plan to buy the Atomstack x20 Pro very soon and hope to make something like this, although yours would be hard to match with my limited skills!
Hello, great video and fantastic execution. Where can I get the blue height adjustment that you use in the lower area? Do you maybe have a link for me?
Hi Carpen TAK_DIY trust u well today. What I like to know is where I can buy a laser. I'm a south African n not sure where to buy a new laser engraving machine thanks for ur help ur video is great 👍
Very nice build! What kind of clear window material (polycarbonate? lexan? acrylic?) did you use, and is that material good at blocking UV light from exiting the box? Great job!
This is clear acrylic. This is a window without UV blocking function. However, there is no problem because the laser head has a protector that blocks UV rays. thank you.
Question, does it really extract all the smoke or does it still fill the room, just not as bad? Also, the wood enclosure made of wood is pretty combustible. Should your laser catch something on fire, your enclosure would be a fire danger.
The smoke is very well vented. The fire hazard of lasers is always present, even if it is not a wooden enclosure. I always watch from the side when I work.
I bought the official enclosure with mine, and it's been good, but I've always thought I'd design and build a better one. This one does a lot of stuff I didn't even consider! The one thing it doesn't seem to have is a camera mount, though.
@@carpentak When I had my camera mounted well, I really got a lot of use out of it for positioning things quickly and easily. But on the new machine, the case bends too easily, so I can't trust the camera.
I just purchased a used Ortur laser engraver and I have searched and searched for ideas on adjustable height engraving and an enclosure. You knocked this one out of the ballpark. Awesome job! Do you have plans available? I usually don’t buy plans but I would be tempted and I’m sure many others would definitely buy!
![⚡[DIY] Brand new enclosure for ORTUR Laser MASTER 3 + Extension kit (Full-build) /Woodworking✅](http://i.ytimg.com/vi/n8X3BcYTiGI/mqdefault.jpg)
![⚡[DIY] Brand new enclosure for ORTUR Laser MASTER 3 + Extension kit (Full-build) /Woodworking✅](/img/tr.png)
Wow. This is the best I've ever seen. Much more sophisticated than the original box. Thanks for the great video. Best regards from Thailand.
My favorite moments in all your videos are when you say: "Okay" :-)
A man that takes the time to do it right!, and takes pride in his work! A sweet enclosure!
So very impressive; well done! I'm not sure if I was more impressed with the project or how awesome your shop is!
Excellent ideas. It seems that you have covered all the bases, except for good veneration. The exhaust fan is underpowered if you are trying to blow more than a few feet. The longer the run, the more power is needed. Air drag in the tubing is the issue, but that is an easy fix. Great design. I like your gridding idea, it is perfect, and the adjustable grid is brilliant.
You have de best workflow I have ever seen and the most accurate finishing wood made. Congratulation!
Just WOW ! Amazing. The best Enclosure OLM2 I've ever seen.👍
This is incredible. In awe of the creativity and as attention to detail. Keep up the amazing work!
asombrado amigo de tu trabajo excelente felicitaciones dios te bendiga
Whow, I was so inspired that I adapted your sophosticated approach to the TwoTree Laser Model S2 ... and it works fantastically...greetings from Vienna
Best enclosure I have seen bar non, masterfully constructed too ! Extremely well done all round!!!
Thanks for the wonderful comment.
Ever think about selling those? Would be very profitable in my opinion. I'd buy one!
I wouldn't. It's pretty, but it's what's called safety theater. Extraction is insufficient to ensure fumes stay contained in the box and are properly removed through the hose, the clear plexiglass doesn't add any protection from the laser light (the shroud on the machine likely isn't high enough optical density to effectively filter the wavelength the laser is emitting) You're better off with no enclosure and putting the whole machine in an isolated shed, wearing a multigas respirator (about $30) and using a $20 sheet of high optical density acrylic as a portable eye shield for observation. If you don't have a dedicated shed or sealed room where you know people won't end up without PPE, a garage with some powerful shop fans directed to create a negative pressure with doors wide open to allow fumes to vent and don't let anyone enter the garage during use or for about half an hour after use without PPE.
I replaced the fan with a bigger one. Then it was much better than before. I chose transparent acrylic to make it easier to film the process. Therefore, color acrylic plates with a blocking function are recommended for those who make them.
Thanks for the idea I will try to make one for me, great enclosure. Well designed.
Well done! I was questioning you until i watched.
Very impressed with how you thought it out.
What a great DIY project. All you need is a workshop full of tools.
I have watched probably 500 youtube videos but your is by far the best. Your creativity and abilities are astounding. I only wish I could have had you for a son or grandson so that I could have learned from you as you grew up. I'm in awe of what you have done here on this video. I have recently gotten interested in laser engraving so that I can sign my woodart. I wanted some way to do taller projects and you have shown me exactly what I needed to see. Thank you so much for your time.
Thank you for your valuable comments. Your praise makes me happy. See you again with a good video.
Best enclosure ever seen.
Clever 👌I think this must be the best cabinet for a laser i have seen,great design 😊
Wow wow . Love it. You male me want all those machines you got there to build. Watching this video was so relaxing and fun to watch. . Just love it.
I just watched this video again. I have to ask, do you ever make a mistake? Your plans, calculations and execution of build always seem to be spot on. Please tell us that you make as many mistakes as the rest of us. Thank you again for your efforts and these fantastic videos.
Yes, very often, I make mistakes too. I review my plans sufficiently to avoid mistakes as much as possible, and keep checking them from time to time while working.
Thank you for liking my video. See you again with a better video.
Yep, you should tap it lovingly, Its a fine job.
Great job on the enclosure! Love it!
you thought of everything! this is an awesome build. Thanks for sharing!
Great Box! Thank you!
First I was thinking (yep I can do that too ;-) ) what is that all about that box? But man that is clever. I think, the moment others stop is where you start to think. Absolutely ingenious :)
Amazing and you make it look so easy 👌
I will be making one of these, thank you!!
Very, very ingenious! Congratulations.
La caja ha quedado estupenda, muy buena la forma. Pero la mayoria de la gente en su casa no puede hacerla. Deberia de poner, hecho en taller de carpintería. Aparte de eso, esta genial.
Beautiful work! Very inspiring!
Baller, very nice!
Fantastic job. I plan to buy the Atomstack x20 Pro very soon and hope to make something like this, although yours would be hard to match with my limited skills!
Excellent and smart
Bravo, it's the best enclosure for Ortur I've ever seen 🤩
Muy Bueno exelente Trabajo un lujo te felicito y gracias por compartir tus ideas
Espetacular! 😃👌 Estou fazendo uma. Parabéns!
This is a very nice video.
The implementation and the purpose is very nice.
I use this creation for my project.
Vraiment génial, Félicitation... j'en ai parcouru des vidéos, et la tienne est incroyable. tu as pensé à tout !!!! Que du bonheur
ok dang lol. that's some craftsmanship
What a great idea!!
Wow! Thank You! Top Case👍
That build was bad ass!
wow amazing work
Amazing, what a great idea and what a great job
Simply amazing!
Great job :) love the ok, ok, ok
Very wonderful work!
Super,super!👍
Hello, great video and fantastic execution. Where can I get the blue height adjustment that you use in the lower area? Do you maybe have a link for me?
a.aliexpress.com/_oDYrtlt
Thank you.
muy inspirador, gracias.
You are AMAZING!!!
Bravo, merci pour le partage.
VC É UM ARTISTA IRMÃO. PARABÉNS FICOU LINDA !
really nice!
good work
Nice one ... Can you make a video about your workshop tools specially the extensions you use.
I have no plans yet for a video explaining my workshop. It will be done in a while.
Я потрясен! Великолепная работа!
Nice!! The first thing you need when you get a laser engraver.
Sehr gute Kiste !!! Gefällt mir.
Excellent craftsmanship and beautiful results. I am curious how did you rewire the controller board to separate it from the laser?
Nothing special. I drilled a hole and pulled the wire out and reconnected it to the controller. thanks
Muy buen trabajo, mis felicitaciones 👏🏻
Outstanding enclosure and fine craftsmanship! You gained a new subscriber!!!
This is massive. Thanks for sharing!
Amazing, what a great idea and what a great Job!
¡Impresionante trabajo!!!
where is the inlet for vent? it is that litle gap on the bottom of the cap? great video by the way, it helped me a lot
Yes, there are many small gaps so air can get in. Thank you.
I mean this is pretty good!!! This is hands down the best enclosure I've seen. However, I feel you could've used more nails.
hey, where are the links to your plans and to your sled? bty great build
I can't make a plan. So there is no plan. Thanks.
is there a video? if so I may be able to make a plan for it@@carpentak
So good.
How does the table saw make the edge grooves so easily?
Hello, thanks for the nice video. Where can I get the jack-like tool that you use to raise the table?
You can find them easily on Amazon. Search for "scissors lift".
Awesome! Btw, what is the balck fan/white pip attachments purpose?
This is to send the smoke inside the box to the outdoors.
Impresionante trabajo, pero de "HECHO EN CASA" como que no.
excellent
lol...over build much? I see from your shop, you are gloriously set up for overbuilding! 👍
Hello bro. That's a very nice enclosure. Could you make a box for Atomstack X20 Pro dimensions?
I don't know that model. can't do it
This is brilliant! What is that lift called? I can't seem to find it anywhere.
It's called a scissor lift. It's on Amazon, etc. Thanks.
Excelente.
How do you prevent the spoilboard from being cut/etched when doing actual cuts?
I use a honeycomb base plate when cutting.
Very Nice, i need one xD but i am have not the maschin for this all! Were can i buy one?
Love this video so much. Wishing to do something similar. Any plans by chance for a reference?
I can't make plans, but I'll be seeing detailed pictures of these dimensions on my Instagram soon.
Sensacional. Parabéns! Nice Job!
With these enclosures, does the fan have separate switch?
yes i installed a separate switch.
hey love the build and trying to build one myself but wondering how you got the controls out of the box and had enough slack for the wiring.
The wiring is not long enough. I barely managed to get the job done. Of course you can too.
Hola. Tienes los planos? Gracias
계획은 없습니다.
Hi Carpen TAK_DIY trust u well today. What I like to know is where I can buy a laser. I'm a south African n not sure where to buy a new laser engraving machine thanks for ur help ur video is great 👍
hello. There is a link to purchase this laser machine in the description below this video. thank you
Very nice build! What kind of clear window material (polycarbonate? lexan? acrylic?) did you use, and is that material good at blocking UV light from exiting the box? Great job!
This is clear acrylic. This is a window without UV blocking function. However, there is no problem because the laser head has a protector that blocks UV rays. thank you.
is it possible to get the data for the ground with the lines? or maybe from the full box?
I have pictures and measurements on my instagram. There is a link in the video description.
@@carpentak i mean the lines with the mm skala
Question, does it really extract all the smoke or does it still fill the room, just not as bad? Also, the wood enclosure made of wood is pretty combustible. Should your laser catch something on fire, your enclosure would be a fire danger.
The smoke is very well vented. The fire hazard of lasers is always present, even if it is not a wooden enclosure. I always watch from the side when I work.
I bought the official enclosure with mine, and it's been good, but I've always thought I'd design and build a better one. This one does a lot of stuff I didn't even consider! The one thing it doesn't seem to have is a camera mount, though.
Yeah I didn't think of a camera mount. I didn't think I needed a camera.
@@carpentak When I had my camera mounted well, I really got a lot of use out of it for positioning things quickly and easily. But on the new machine, the case bends too easily, so I can't trust the camera.
Bravo !! 👏👏👍
Do you sell plans for this build?
I don't have plans.
ja trocou a lente da sua maquina?
아니요 렌즈는 교체하지 않았습니다.
Nice work man, one question where do i buy the adapter of the laser the one where you make it go up and down min 1:02 , thanks for the video.
This is Made the Best.com. It has links and discount coupons in the video description.
Fantastic
와우 기가 막힙니다. 죄송한 말씀이지만 혹시 도면좀 얻을수 있을까요?😀
잘 봐주셔서 감사합니다. 저는 도면은 그리지 않아서 드릴 수가 없습니다.
Beautifully made enclosure. Where did you find that adjustable table you used for the roller attachment?
a.co/d/i18AWzn
Thank you
Thank you!
I just purchased a used Ortur laser engraver and I have searched and searched for ideas on adjustable height engraving and an enclosure. You knocked this one out of the ballpark. Awesome job! Do you have plans available? I usually don’t buy plans but I would be tempted and I’m sure many others would definitely buy!
I don't have plans. Instead, I'll show you this.
instagram.com/p/ChlqPy1PVIt/?igshid=YmMyMTA2M2Y=
Your work is precise! Even your brad nails are perfectly spaced.
Nice Enclosure,
Some notes/questions:
Are the windows rated for the laser?
And do you plan on adding a exhaust/Filtersystem?
Thank you.
The windows are just plain windows. There are no plans to add an air filter system.
I have the same laser, how much to make it and will you make one like it and sell?
I don't sell it. sorry