I have mine for over 2 years, absolutely love it. Thank you for the review of accessories and how to smoke ribs! If you can make a cleaning video, that would be awesome. Thank you for making this video
Yeah but you have to grill over the tamers wasting alot of grilling in between...thats what I noticed on your demo selective grilling above the tamers.
You can certainly grill across the whole surface. I was just wanting to spread out what I cooked across the whole grill, so I guess it looks centered over the tamers.
No, but that is normal for a gas grill. Most gas grills have even more of an opening along the back wall, designed to vent when the lid is closed. I can't think of any gas grills we carry that have a fully closed lid.
I bought one, its great concept but poorly executed. There are many issues, you can't have all burners on high with the hood down or it warps, the grill plates don't sit on the tabs properly, the slightest bump and they fall off, the heat isn't even across the grill, it has a lot of cold spots, don't buy the rotisserie it's made of cheap folder metal, mines already warped after a single use, it can't be used in the rain and since there isn't a dedicated rotisserie burner and Everdure recommend keeping the grates on food doesn't brown, it just spins around, the grease trap is pointless, the BBQ is flat, grease can't run into the trap, it just sits in the bottom of the BBQ and can ignite, the expensive cover isn't made from water resistant canvas, if it's raining the cover doesn't protect the BBQ, it still gets wet, I BBQ all year round, rain hail or snow, I don't think I will be with with this BBQ, it will be a summer only BBQ.
I totally agree re the poor design of the tabs for the grill plates - they are heavy and well made, but sit poorly in the BBQ - not what I was expecting for the not insignificant sum this cost. We have only had ours for a couple of days, cooked steak on evening one and lamb rack on evening two. Both turned our much better than our previous 4 burner CADAC of a more traditional gas grill design. The BBQ gets hot, really hot in a relatively short period of time. I am yet experience any warping - but it will be flying back to whence it came, should that be the case!
@@nathanakers1 they won’t accept any returns for warped lids. Apparently they did earlier then they put a warning in the instructions where it states you can’t have all burners on full with the lid down.
I love mine (Furnace with 3 burners), although I don't use grills for a rotisserie chicken. Your lid most likely is defective. That's a bummer. I had the grill on a full blast for a long time, multiple times (to burn the food residue), and the lid is as sturdy as new. The plates/grids may fall if you don't space them evenly, which should be installed evenly for the optimum performance. If a woman is capable to figure this out, why a man, who calls himself a MasterChief, can't? Usually, I cook ribeye and NY steaks and they are cooked to a mid-rare, better than at any restaurant. They are ready fast too; the grill takes 3 min to heat up to a max temp shown on thermometer. I even used it today, when there was only 50 F outside and had no issues.
@@efoster11 There is a difference between the Gen 1 and Gen 2 versions of the Force and Furnace, they fixed most of the faults with Gen 2. My grill will not heat past 250 degrees, it won’t come even close to 375 which is the max temp on the gauge. It’s will not get hot enough to sear.
The internal floor of the BBQ under the burners is very flat. I can't see fat running into the grease tray too well. Looks like a cleaning nightmare. I guess Heston has never cleaned a BBQ so his name does nothing to inspire confidence in a good design.
The grease just sits there until you clean it, there is no greese management, all in all it's a poorly design piece of junk, I wouldn't recommend it to anyone.
I have mine for over 2 years, absolutely love it. Thank you for the review of accessories and how to smoke ribs! If you can make a cleaning video, that would be awesome. Thank you for making this video
So there are NO bad things or things that could be improved?
I'm trying to find reviews of this and not just what sounds like long-winded ads
No grill is perfect but the Everdure Furnace does have some great features!
lots of bad things, see my comment above.
When you smoked the wood chips what burners did you have on/off. And were the wood chips soaked or dry?
Yeah but you have to grill over the tamers wasting alot of grilling in between...thats what I noticed on your demo selective grilling above the tamers.
You can certainly grill across the whole surface. I was just wanting to spread out what I cooked across the whole grill, so I guess it looks centered over the tamers.
That's very nice.
We enjoyed it! Thanks for watching :)
is this model able to be converted to natural gas?
This model cannot be converted.
BBQGuys really? one of ur sales reps jus sent a link to the converter.. can u please confirm?
thanks for ur reply!
How would you compare this to a Weber Genesis II e-315?
hard to compare as this grill is for more on-the-go type grilling.
no vent that closes it fully?
No, but that is normal for a gas grill. Most gas grills have even more of an opening along the back wall, designed to vent when the lid is closed. I can't think of any gas grills we carry that have a fully closed lid.
I bought one, its great concept but poorly executed. There are many issues, you can't have all burners on high with the hood down or it warps, the grill plates don't sit on the tabs properly, the slightest bump and they fall off, the heat isn't even across the grill, it has a lot of cold spots, don't buy the rotisserie it's made of cheap folder metal, mines already warped after a single use, it can't be used in the rain and since there isn't a dedicated rotisserie burner and Everdure recommend keeping the grates on food doesn't brown, it just spins around, the grease trap is pointless, the BBQ is flat, grease can't run into the trap, it just sits in the bottom of the BBQ and can ignite, the expensive cover isn't made from water resistant canvas, if it's raining the cover doesn't protect the BBQ, it still gets wet, I BBQ all year round, rain hail or snow, I don't think I will be with with this BBQ, it will be a summer only BBQ.
I totally agree re the poor design of the tabs for the grill plates - they are heavy and well made, but sit poorly in the BBQ - not what I was expecting for the not insignificant sum this cost. We have only had ours for a couple of days, cooked steak on evening one and lamb rack on evening two. Both turned our much better than our previous 4 burner CADAC of a more traditional gas grill design. The BBQ gets hot, really hot in a relatively short period of time. I am yet experience any warping - but it will be flying back to whence it came, should that be the case!
@@nathanakers1 they won’t accept any returns for warped lids. Apparently they did earlier then they put a warning in the instructions where it states you can’t have all burners on full with the lid down.
I love mine (Furnace with 3 burners), although I don't use grills for a rotisserie chicken. Your lid most likely is defective. That's a bummer. I had the grill on a full blast for a long time, multiple times (to burn the food residue), and the lid is as sturdy as new. The plates/grids may fall if you don't space them evenly, which should be installed evenly for the optimum performance. If a woman is capable to figure this out, why a man, who calls himself a MasterChief, can't? Usually, I cook ribeye and NY steaks and they are cooked to a mid-rare, better than at any restaurant. They are ready fast too; the grill takes 3 min to heat up to a max temp shown on thermometer. I even used it today, when there was only 50 F outside and had no issues.
@@efoster11
There is a difference between the Gen 1 and Gen 2 versions of the Force and Furnace, they fixed most of the faults with Gen 2.
My grill will not heat past 250 degrees, it won’t come even close to 375 which is the max temp on the gauge. It’s will not get hot enough to sear.
The internal floor of the BBQ under the burners is very flat. I can't see fat running into the grease tray too well. Looks like a cleaning nightmare. I guess Heston has never cleaned a BBQ so his name does nothing to inspire confidence in a good design.
Check out our expert review here: www.bbqguys.com/expert-reviews/gas-grills/everdure-furnace-force
So your saying the grease doesn’t fall to the tray ?
@@nidalhallani7906 I didn't buy it so I can't say for sure, but yeah, I don't see the fat running into the drip tray too well.
The grease just sits there until you clean it, there is no greese management, all in all it's a poorly design piece of junk, I wouldn't recommend it to anyone.
Gas grill? No thanks!
Stovetops is in everyones house! Just add grilling stuff!
We have plenty of Charcoal Grill & Smoker options if that is what you are looking for - www.bbqguys.com/bbq-grills-smokers