CLEAN LIAN LI BUILD with O11D EVO XL & GA II LCD SL-INF

Поділитися
Вставка
  • Опубліковано 22 жов 2023
  • One clean build with Lian Li O11D EVO XL, pairing it up with Galahad II LCD SL-INF 360 AIO and of course, UNI FAN SL-Infinity fans. What else would you want except eventually high-end components and a custom loop. :)
    PC Build Specifications:
    ►Lian Li O11D EVO XL: geni.us/D4daFTT
    ►Lian Li GA II LCD SL-INF 360: geni.us/rthMwYI
    ►Lian Li UNI FAN SL-INF 120 Regular: geni.us/2MujZm
    ►Lian Li UNI FAN SL-INF 120 Reversed: geni.us/4kpFFY
    ►AMD Ryzen 9 7900X3D: geni.us/ls1A68
    ►ASRock B650E Taichi LITE: geni.us/NsBg8
    ►Kingston FURY Renegade DDR5 RGB 2x 16GB 6400MHz:
    ►Kingston FURY Renegade Gen4x4 4TB: geni.us/IZ1v
    ►Gainward GeForce RTX 4070 Phoenix GS: geni.us/YzwW0YO
    ►ANTEC Signature 1000W Platinum: geni.us/g5RBW43
    SUGGESTED PRODUCTS:
    ►CableMod Cables: geni.us/TAYTe
    ►GT Omega Chairs: bit.ly/GTOmegaChairs
    ►UPerfect Monitors: bit.ly/uperfectmonitors
    ►MOZA Racing Gear: bit.ly/MOZARacingGear
    ►Subscribe here: bit.ly/3erJB33
    Check out my other channels:
    ►PC Crazy Racing: bit.ly/3Buykfn
    ►PC Crazy ASMR: bit.ly/3HqYVxt
    ►Join my Membership to get access to perks:
    / pccrazydario
    My recording gear:
    ►Camera (video): Blackmagic PCC 6K Pro: geni.us/yZlAn
    ►Camera (photo): Canon EOS 90D: geni.us/QETkjz
    ►Lenses: Samyang CineLens VDSLR MK2 kit: geni.us/nUoaK
    ►External monitor: ATOMOS SHINOBI: geni.us/IFGQ25k
    ►Storage: AngelBird Match Pack Blackmagic PCC 6K PRO: geni.us/0bQA
    ►Lighting System: NANLITE FS-150: geni.us/09WC3A
    ►Softboxes: NANLITE SB-PR-90-Q: geni.us/UT0RA
    ►RGB Tubes: NANLITE PavoTube II 6C: geni.us/HHd76
    Music by Epidemic Sounds:
    ►Flux Vortex - Lost Touch (Instrumental Version)
    ►Lupus Nocte - Final Run
    ►Lupus Nocte - Gaining Season
    *************************************************************************************
    BUY ME A COFFEE ☕☕
    If you think I need more energy, you can show your support by buying me a coffee! Supporters get a shoutout in the next video! No subscription or sign-up required!
    ►LINK: www.buymeacoffee.com/PCCrazy
    *************************************************************************************
    NOTICE: Amazon links provided are linked to my Amazon Affiliate account and support the channel at no extra cost to you.
    #lianli #o11devoxl #gaiilcdslinf
  • Наука та технологія

КОМЕНТАРІ • 27

  • @Gustavo-tg1wm
    @Gustavo-tg1wm 6 місяців тому

    Hey, good video.
    Can you tell me if this new EVO XL model supports 3 power supplies? Is it possible to remove the two HD drawers and add more power supply? I didn't find this information on the internet...

    • @johnnyklassicz
      @johnnyklassicz 5 місяців тому

      Why would you need to do that? Makes no sense

  • @novacombatarts
    @novacombatarts Місяць тому

    How did you sink the ram colors to the fans

  • @SwidAC
    @SwidAC 4 місяці тому +1

    Nice video
    Is it disruptive if I place the pipes on the right side of the processor for the AIO ?

    • @PCCrazyDario
      @PCCrazyDario  4 місяці тому +1

      Thanks... :) For the tubes, it can be done as you wish. I think I actually did that in O11 VISION review video.

  • @Hero1117a
    @Hero1117a 2 місяці тому

    Nice

  • @kwell889988
    @kwell889988 7 місяців тому +1

    at 4:11 i could see that 6 fans are intake and 4 are out , is that right ? or i am seeing wrong ? wouldn't be better to change 1 of the side intake to out , to get 5 in and 5 out ?

    • @captainbosh3747
      @captainbosh3747 7 місяців тому +1

      They are using reverse blade fans too so not as straight forward to see what the flow direction is.

    • @PCCrazyDario
      @PCCrazyDario  7 місяців тому +2

      That is correct. 6 are intake as they are reverse blade ones and 4 exhaust. It doesn't matter and honestly it doesn't make sense doing 2 intake 1 exhaust on the side because after all, three on the bottom are blowing towards the GPU which exhaust the air sideways and through the PCIe lane at the back. So basically, it is all good. This is the optimal configuration in this case.

    • @joepro42
      @joepro42 3 місяці тому

      you want a positive pressure case instead of negative which means more fresh air coming in than what is going out... so case stays cooler with more fresh air coming in.. you can do an equal setup but as all know heat rises so you need the three going through the radiator and one or two in the back at least.. but always more coming in from unobstructed pathways is always better.

  • @ordep810
    @ordep810 4 місяці тому

    What light settings is that in the software? Really cool!

    • @LightSlasher2010
      @LightSlasher2010 4 місяці тому

      Running it on my setup as well. It’s called “Runway” but you have to set it to merge all fans together and if your rows of fans aren’t plugged into each subsequent port the correct way, it’ll look wonky.

  • @jimjames6287
    @jimjames6287 7 місяців тому +2

    On these particular fans, the air flow goes OUT the bracket side. Did you deliberately set up all of your fans as exhaust or is that a mistake?

    • @PCCrazyDario
      @PCCrazyDario  7 місяців тому +9

      On the side and the bottom you have Reverse blade fans, which means they are intake. So you have 6 intake and 4 exhaust.

    • @brrrandamoactivo
      @brrrandamoactivo 4 місяці тому

      ​@@PCCrazyDarioHello, I gonna do 3 x140mm on the bottom and side, 6x120mm reverse blade push-pull aio on the top, and 2x120mm reverse blade on the back, what do you think? Is there a difference if the configuration would be the other way around, like 140mm reverse and 120mm normal blade? I did the configuration like this because Lian Li has not yet planned to release SL140-infinity reverse, they don't even have them in the 3 kit, while the dynamic evo xl is already out. I hope you can answer me, thank you. ( The build is in Dynamic evo xl)

  • @JayzBeerz
    @JayzBeerz 7 місяців тому +2

    Nice but I like the Phanteks NV series better.

    • @PCCrazyDario
      @PCCrazyDario  7 місяців тому +1

      Everyone has their own favourite of course. ;)

  • @tz2926
    @tz2926 3 місяці тому

    Did you just use the Aio controller? The description says that only 6 fans are recommended, right? You use 10.. Does everything work even if you set white 100% brightness? Furthermore, all case fans are oriented towards the CPU fan, right?

    • @Viinnce_
      @Viinnce_ 3 місяці тому

      Bro saw 1 Linus Tech Tips video and thinks he a expert at building pcs now

    • @tz2926
      @tz2926 3 місяці тому

      @@Viinnce_ well, I‘m building my first pc.. I just won’t make mistakes

    • @hannahalexy
      @hannahalexy 3 місяці тому

      I'd also love to know this....I just got the same case with 11 uni v2 fans too (3 on the aio. Shame lian li doesn't make a 420mm) and only got 1 controller as I've read a controller can support up to 16 fans, apparently??
      How did you go? Have you figured this out?😅

    • @tz2926
      @tz2926 3 місяці тому

      @@hannahalexy The problem is that the aio controller supports only one sata connection and the „normal“ controller supports two sata connections. This allows more fans 🤔

    • @tz2926
      @tz2926 3 місяці тому

      To be safe, I build my PC with two controllers

  • @Wayne55231
    @Wayne55231 6 місяців тому +1

    Very nice build. My parts are in shipment for my new build.
    Ryzen 9 7800X3D
    AMD Radeon RX 7900 XTX
    Corsair Vengeance 2x16 32GB ddr5 6000mhz
    GIGABYTE X670E AORUS Master
    2x samsung 990 PRO Series M.2 2tb
    Seasonic Prime TX-1300 watt, 80 PLUS Titanium
    Lian Li GALAHAD II 360 Trinity SL-INF AIO
    Lian Li O11 Dynamic EVO XL case
    7x Lian Li UNI FAN SL-INF 120 ARGB fans

    • @PCCrazyDario
      @PCCrazyDario  6 місяців тому +1

      Thank you and wow, that is going to be a nice build! :)

  • @cabelokira1573
    @cabelokira1573 6 місяців тому

    Top🌈🌈🤩🤩👏👏