How To Achieve A Fine Finish On Cabinets With A Roller! For the DIYers
Вставка
- Опубліковано 6 лют 2023
- www.pinealpainting.com
PINEAL PAINTING LLC
Serving Sarasota, Florida
This video I did real quick to show how to paint cabinet doors with a roller.
I often get questions on this so this for for the DIYers who do not have a sprayer.
I hope this helps.
ROLLER NAPS: www.sherwin-williams.com/home...
Happy Painting! - Навчання та стиль
![Painting MDF Doors [video 407]](http://i.ytimg.com/vi/ZIwNJGlVtwc/mqdefault.jpg)
This was extremely helpful. I’m using the same SW primer and paint for my honey oak cabinets, and now realize I didn’t use nearly enough primer. I’m so glad I found your video before going any further! I appreciate the help on technique, too. Thanks very much for the video!
Thanks so much! Your videos are helping out so much.
You're welcome!
Awesome! Yes, do some sanding and make sure it feels smooth!
Very nice video thank you 👍
I appreciate your encouragement! Glad to help.
Awesome video, thank you. I have to repair some thermofoil cabinets on a property I run and have been looking on the best way to do that. This is the best video I've seen so far, short and to the point with great details, thank you so much.
Awesome! Glad to help!
landlords are disgusting leeches. I own my house and will never lease anything.
Amanda the Superstar!!!
Thanks Mark, You made me laugh! Great meeting, I look forward to working with you!
Nice work! Any thoughts on the better sheen to use on kitchen cabinets?
I think Semi-Gloss is best but most of my client's choose a Satin finish.
And for the heat gun. Do you have any recommendations? How many degree we need? Do I have to pay for a very good one or the smaller can be ok- thank
As for the heat gun, I did not buy a top of the line. Using a small heat gun is absolutely fine. Heating the corner to get it started then just pull the foil wrap off. Using heat as needed.
How do hang the doors with acutely using clothes hangers? Brilliant idea ❤
Thanks! It's an amazing idea! I would love to take credit for the idea but it wasn't mine. :)
Good job and stuff! But I could not make out the color while paint you were using? What was the shade name again? Thanks!
Hum, I cannot remember what color that was. :) Probably the standard off shelf White. It is a nice clean White and not too shiny.
Hi Amanda, I want to know how you proceed for the frame of cabinet! You know the great sheet on the side. I suppose you just sand and put the primer on? No heat gun for the frame? My english is not perfect so I hope I am clear in my question! -Canadian fan
Hello From Canada!! Welcome! I would be happy to help you. I am in progress of doing a video on actually how to do this very thing. Yes, Do the same process on the boxes and side panels. No heat gun needed. They typically do not apply the foil wrap to those areas. You could always do a test on it with a heat gun. But, I clean, sand, prime and paint using a small "wiz" or "mini roller" with a fine nap. Hope this helps.
Never saw you sand
skip to 11 min@@mukeshpatel-gj4sd
Hi Amanda, what grit sandpaper do you use in between coats?
Where do you buy bumpers to re attach on the inner side of the cabinet door or can you reuse them and are they glued on, what glue ?
I usually by them at the local stores but sometimes I order them online if they don't have them in stock. I don't re-use
which paint do you recommend for cabinet (flat, semi-gloss or gloss)? I'm looking for the same finish as yours. Looks great btw and thank you for showing us how to do it! :)
I usually use a semi gloss for a nice shine. Gloss would be extremely shiny so it depends on how shiny you want it. In my opinion higher glosses will cure harder. You are very welcome. Thank you for your support.
Can you please confirm what kind of roller I would need for the primer and for the finish
Hey Maria, Thanks for asking. I added a link to the description for you. Hope this helps.
www.sherwin-williams.com/homeowners/products/contractor-series-mohair-mini-rollers
Any reason to not use a mini foam roller?
You definitely can use a foam roller if you prefer! :)
Thank you! I’m trying to build up the nerve to try this 🤣🤣 Although, the thermofoil on my cabinets is peeling, so I can’t make it much worse.
No, probably not! Try it in a small bathroom. I know people who have done their own. It can come out nice!
Great video Amanda. Does the primer have to be a special type? I read that if the mdf absorbs moisture that can cause problems (I’m in the UK so I can’t get the exact same brands as you I just need to know the type of primer to buy.)
Thank you very much.
@@BAC_Mono Yes, If that fiber board gets wet it can cause it to swell. But, cleaning them and priming them has never caused me an issue. Least amount of water the better and none standing or pooling. I always use a (Bonding Primer) In some cases you may not need to prime if you use a (Urethane Enamel) on them. It cures hard like an Epoxy. Hope this helps!
Do you sand before you prime
@@PinealPaintingLLC Urethane enamel cures hard it's not friendly to the touch, i prefer oil enriched enamel finish it still cures hard but not as hard more like high quality trim finish.
Increase the humidity so the. Paint can lay down
LOL