With some cars it will connect the phone and device with Bluetooth, but when you try to check codes it will say can't connect to ECU or suchlike. In that case go into Torque settings, click OBD 2 Adapter Settings, and then Choose Bluetooth Device and make sure you check the OBD 2 box. That one really had me stumped for a bit.
Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .
Well please check the ELM327 unit with any other unit to make sure if it is OK or not. Then restore any changes to default mode and try again. Could you change the software that you are using?
It seems that AdHoc is not compatible with Android, in a notebook connect the device as well as possible, is there any firmware update that AdHoc does not use?
Conect to my obd2 but no internet access, because my WiFi internet conection changed obd2 device than pairing not connected to ECU, what's the problem?
Dude please help me , I brought one exactly the same as yours , I connected it shows no internet then I go to torque app and the blinking of lights don't stop and just shows connection refused or error connecting or somethin'
Your phone can show the setting which is located left side below. While at my phone that setting are not shown. How to show the setting button on the phone?
@@bestofmyexperience2820 : I made a friendly question,no need for irony ! I asked this ( you also will knew it if you have made some research) because many drivers here in UA-cam complain that the ELM327 can not be recognized by their ECU and some suggested the first they must run the CD driver of the package in their home PC, then download it in their (android) cell phone and they must go to their car for install. That's why i asked you with a gently manner,if you doubt take a look www.google.com/search?newwindow=1&client=firefox-b-d&biw=1920&bih=930&tbm=vid&ei=PMQNXpHgIYyGgQbeqpnwBQ&q=ELM327+failed+connection&oq=ELM327+failed+connection&gs_l=psy-ab.3..0i8i30k1.20741.23043.0.23523.11.10.0.0.0.0.247.787.0j2j2.4.0....0...1c.1.64.psy-ab..7.4.784....0.oNm9wkud7bo Since your procedure takes a lot of MB maybe a driver has some problem By the way: irony from a distance does not add years on your life or would not improve your health.
I really did not mean it. You can install any software from play store or ... WIFI is the way your cell phone and ELM327 communicate each other So please watch the video carefully and if you had any problem please let me know🙏🙏🙏
gracias por tu video, excelente informacion.
Thanks for your kindly message.
Thank you! worked for me! Android 12 user.
🙏
Will this work for other obd2 port adapters?
I have not checked it. I will check if it works i will innform you
My ELM does not show up in the wifi section of my phone, all the other available networks appear. Is mine faulty?
It might be faulty but after connecting ELM to OBD2 connector did you put the switch on the ON position?
@@bestofmyexperience2820 where is the switch?
@@TheLoneRanger1992have you solved the problem with connection?
There is no switch... I have the same problem mine ELM doesnt even show up
Me too 💔
Nice job
Thanks
everything connects fine, but when I try start diagnostic, the access point disappears, what should I do? is this a defective adapter?(
Maybe. But first check if you put the switch in ON position first then check with another car and also another phone.
With some cars it will connect the phone and device with Bluetooth, but when you try to check codes it will say can't connect to ECU or suchlike.
In that case go into Torque settings, click OBD 2 Adapter Settings, and then Choose Bluetooth Device and make sure you check the OBD 2 box.
That one really had me stumped for a bit.
Thanks for your advice🥇
Your voice gives me ASMR 😂😴
🤔😢
Don't worry, it's a good thing! Great video man, solved my issue! Praises 🙌
TOP. thanks a lot
Thanks for your kindly comment.
What are you using the software ODB2 WiFi scanner? I need find iOS software my car is Honda Hybrid Insight 2012
Its called torque
It dosent work for my car
Its chery
Can you help me
What is the problem?
You should do step by step
Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .
Well please check the ELM327 unit with any other unit to make sure if it is OK or not. Then restore any changes to default mode and try again. Could you change the software that you are using?
@@bestofmyexperience2820 its not a a client software issue. its not connecting to the network . it needs a reset
It seems that AdHoc is not compatible with Android, in a notebook connect the device as well as possible, is there any firmware update that AdHoc does not use?
Conect to my obd2 but no internet access, because my WiFi internet conection changed obd2 device than pairing not connected to ECU, what's the problem?
Please watch the clip carefully everything you need is there
Not connecting to ECU what is the prblem?
Does it connect to your mobile phone wifi?
Dude please help me , I brought one exactly the same as yours , I connected it shows no internet then I go to torque app and the blinking of lights don't stop and just shows connection refused or error connecting or somethin'
Did you put the switch on ON position?
There is not any special problem that you can't do it. Just try with another phone and at last another car
Not working, it says it can’t connect to ECU
Do you put switch in on position?
No need to start the engine.
Your phone can show the setting which is located left side below. While at my phone that setting are not shown. How to show the setting button on the phone?
Well I don't know your phone model.
Iphone x max ios 15.6.1
It is connected by wifi
But not working to any apps
Wifi is connected OK?
Then do you put switch to on position?
Can it fix something?
Almost all car after 1996that are using OBD2
What if mine doesnt show that red light and doesnt turn on?!?
then you're screwed
讚啦!!!
When we do not have WiFi (let's say we not close to our house) but only Bluetooth and the ELM327 does not recognize our ECU what can we do?
WiFi of your mobilephone not your house!!!
Do know the deference?!
@@bestofmyexperience2820 : I made a friendly question,no need for irony !
I asked this ( you also will knew it if you have made some research) because many drivers here in UA-cam complain that the ELM327 can not be recognized by their ECU and some suggested the first they must run the CD driver of the package in their home PC, then download it in their (android) cell phone and they must go to their car for install.
That's why i asked you with a gently manner,if you doubt take a look
www.google.com/search?newwindow=1&client=firefox-b-d&biw=1920&bih=930&tbm=vid&ei=PMQNXpHgIYyGgQbeqpnwBQ&q=ELM327+failed+connection&oq=ELM327+failed+connection&gs_l=psy-ab.3..0i8i30k1.20741.23043.0.23523.11.10.0.0.0.0.247.787.0j2j2.4.0....0...1c.1.64.psy-ab..7.4.784....0.oNm9wkud7bo
Since your procedure takes a lot of MB maybe a driver has some problem
By the way: irony from a distance does not add years on your life or would not improve your health.
I really did not mean it.
You can install any software from play store or ...
WIFI is the way your cell phone and ELM327 communicate each other
So please watch the video carefully and if you had any problem please let me know🙏🙏🙏
@@bestofmyexperience2820 : OK sir thank you a lot.
My mobil no obdll wifi connate
It doesn’t work with me
Android, but not IOS. Trying other relate to the IOS.
Mine says connected no internet
If car is not blinking so you are connected to the car.
SPEAK UP LIKE A MAN
Thanks. ❤️
@@bestofmyexperience2820 don’t mention it! If men don’t remind men to be men, we will soon have none left.
Does not work for me on iOS :( Still unable to connect
Try to check with an android phone to check if your device is OK or not.
@@bestofmyexperience2820 yes, that’s the plan. Either an iOS bug or my device is not good.
Why are you talking so LOW? Try explaining what you're doing if you really want to help people.
Well English is not my first language so I'm trying to to do the best 🙏🙏🙏🙏
I actually found your low tone to be more understandable than those who want to shout.
Not found wifi
Have you put the key on?
There should be power on dashboard