Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .
Hi. Mine also in ad-hoc mode, and no android phone sees it. Wondering, if I switch it to Infrastructure, and do a wifi tether with my phone, (WiFiOBD as SSID) will I be able to use it? Have you tried it? Thanks.
Yeah same, it just doesn't show up in my wi-fi list... All the neighbours wi-fi's appear juat not the OBD2, using an Android phone, have restarted everything
Thanks a lot for sharing your knowledge.
My pleasure
Very helpful, thank you so much
Glad it was helpful!
thanks a lot
You are most welcome
Cool video i have a ELM327, how do I factory reset it .. Thank you .
Can I connect to ipad it's possible? Tkx you 🤗
This is only compatible with Android.
أيهما أفضل جهاز بلوتوث أم جهاز واى فاى ؟
When I connect to the wifi it connect like for two minutes and then it disconnects and doesn’t show the wifi for obd
Did you fix this?
@@LaneyaWilesno but I bought a more quality obd scanner and it works perfect
What is your better odb please , same problème, ip is good bit disconnect all time or dont find wifi odb
Very usefull instructions!!!! Bravo!
Glad it was helpful!
The light is on on the unit, however it doesn't show up in my wi-fi list....any ideas?
Try to unplug and plug it back in, you might have a defective unit. Make sure yours is a WiFi not the Bluetooth type.
I followed you set up instructions and got to a point that was showing checking model and that was the end
Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .
me too i wonder why i cant acess it as well
Hi. Mine also in ad-hoc mode, and no android phone sees it.
Wondering, if I switch it to Infrastructure, and do a wifi tether with my phone, (WiFiOBD as SSID) will I be able to use it? Have you tried it?
Thanks.
does this read and remove abs light
આભાર
i did all steps but my device keep disconnecting after a short time and i have to repeat steps.
Same here...
You bought a fake elm 327
Same
Can't connecting to phone
You need a computer with USB port
i have the massage latency to high !!!
What does this acc do
I followed what you did and it still didn't connect
Make sure you are connected with Wireless not Bluetooth.
Yeah same, it just doesn't show up in my wi-fi list... All the neighbours wi-fi's appear juat not the OBD2, using an Android phone, have restarted everything
Is it compatible with iOS devices??
My wifi doesn't show obd. After making wifi settings on the app and going to wifi settings it will not show obd 2 on my wifi...