I have been trying to connect obd super wifi for two weeks unsuccessfully. Always get error message not communicating with ECU. I HAVE CHECKED PORTS CONNECTIONS AND WIRING OK COZ WORKING WITH OTHER DEVICES. ANY HELP?
Can you help me connect Bluetooth obd2 adapter with Nakamichi android car stereo. The Bluetooth settings in the unit does not have the option to change the password which is 0000.All my obd adapters use 1234.Please help. Also the joying unit in my other car connects with adapters that only have obd2 as their internal name..
My ELM327 Mini is lose in OBDII Port if you touch it the green light comes on then goes off and keeps trying to connect to Wifi, its like its not holding to pins, However my regular scanner does not have this problem, 2010 Suburban LTZ?
Please check your OBDII 2 unit it could have a loose pin or component that connects when you applied pressure. If the connector from your car is faulty then all connectors will have the same issue but you said that your scanner works fine.
1.check if your head unit (radio) is connecting to your phone or other devices this might reject the OBD2 connection as some units can only chain connect to 1 device at a time. 2.check if your OBD2 is not losing power source or overpowered which reset its settings ( in times during engine start system power fluctuates to zero). 3. Test your OBD2 to another head unit and car if your observation is the same your OBD2 might be defective.
bro mine didn't also. just change the bluetooth name and password then tap on OBDII nonstop untill it says paired. thats how I did it. hope it works for you too man.
Thanks alot that solved my problem as well...
Why my obd2 scanner not detected?
I have been trying to connect obd super wifi for two weeks unsuccessfully. Always get error message not communicating with ECU. I HAVE CHECKED PORTS CONNECTIONS AND WIRING OK COZ WORKING WITH OTHER DEVICES. ANY HELP?
It pairs but does it connect? Will you show a video of the obd scanner opening and reading the codes?
Can you help me connect Bluetooth obd2 adapter with Nakamichi android car stereo. The Bluetooth settings in the unit does not have the option to change the password which is 0000.All my obd adapters use 1234.Please help.
Also the joying unit in my other car connects with adapters that only have obd2 as their internal name..
My ELM327 Mini is lose in OBDII Port if you touch it the green light comes on then goes off and keeps trying to connect to Wifi, its like its not holding to pins, However my regular scanner does not have this problem, 2010 Suburban LTZ?
Please check your OBDII 2 unit it could have a loose pin or component that connects when you applied pressure. If the connector from your car is faulty then all connectors will have the same issue but you said that your scanner works fine.
mine.. can see obd2 in car android settings .. but passcode not asking... when i touched obd2 in bluetooth.. nothing happens...
Same problem.
my scanner connects to wifi and it says i’m connected to the obd2 then a few seconds later it says no connection
not working in T3 P1 also, OBD2 is not connecting at all
F@$$##king life saver!!! Thkq so much for this
My connects but only lasts for 1 minute... I have to take the dongle off and on again
1.check if your head unit (radio) is connecting to your phone or other devices this might reject the OBD2 connection as some units can only chain connect to 1 device at a time.
2.check if your OBD2 is not losing power source or overpowered which reset its settings ( in times during engine start system power fluctuates to zero).
3. Test your OBD2 to another head unit and car if your observation is the same your OBD2 might be defective.
@@rhinotech3735 This fixed my problem thanks
If you can delete all your saved devices from your player . Easy connet your obd.
am using joying android 10.0, still wont work :(
Same here dude if i find a method ill let you know
Same here with isudar px6 for alfa mito it doesn't pair.. android 10
My android player does not pop up key in bluetooth password. Just can select bind with obd2.
bro mine didn't also. just change the bluetooth name and password then tap on OBDII nonstop untill it says paired. thats how I did it. hope it works for you too man.
Hi didvyou solve?
@@albgili6697 Remain unsolve