The ability to take flat scrap sheet metal scavenged from old office furniture and turn it into complicated body panels with nothing but basic shop tools is amazing!
Tony, you are a master craftsman. Thank you for sharing all of your knowledge with us. Really appreciate it and really enjoy watching your educational videos.
That's no doubt going to be the cleanest, most rust free yota on the planet when you get done with it, it's amazing how much rust is hidden in such a little car, great tips as always Tony, can't wait for the next one
Yep, even in Baltimore where vehicles suffer far less salt-induced corrosion, these Toyotas almost consistently met their end being driven to the scrapyard with their floors falling through
Thank you so much.I was looking to fix drip rail on my Nissan sentra.Had no idea how to start.You gave me the inspiration.One big thing is not to overtime the process.
Hi Tony, I've been following your channel for a while now, it inspired me to start my own channel, which is doing much better than I ever expected, much of what I've learned from you can be seen in my work, I, of course give you due credit for that 😊. The most useful thing I've picked up is the cut & butt process, it's close to what I used to do, but so much better. Thank you so much for your time and willingness to share your years of knowledge. Dave
I'm only a minute in and clicked like already, I know good work is coming! I'm dong the roof on my truck now, so this is motivational for me. Thank you.
Fantastic repair. This makes me appreciate one of the few plus factors of living in California -- RUST FREE CARS (or nearly so, depending on location).
Tony, ALL of your videos make a daunting job much more approachable! YOU are a MASTER at this! Your guidance and the way you explain the process is on another level! 💯👍 Thank you for sharing these skills, Sir! It's definitely one of my all-time top channels that I follow! Have a blessed day! Steve 👍
Hey Tony, lots of great tips! Again!;) Through trial and error I've found the same technique when I blow a hole. Thicken the edge of the hole and work back to the new metal. Drip rail!:( You helped me a year ago get through the roof edge rust on my 64 F100. Inner and outer hood lip as well. I've been using a high quality urethane sealant as a seam filler. Printable, long lasting and much cheaper. My first jeep was completed fourteen years ago and still holding up great. No, I don't drive it in the Wisconsin salt. Almost all of the rust repair I've seen is from seam sealer fail and dirt and debris trapping moisture. Got to clean and reseal those seams !:) Thanks for all the help!😊
This is the hardest part to repair on a car. The metal spreader surely is home built and I want to watch that vidya. Once again Fritz blows my mine with the ability to repair using simple basic tools.
Can’t believe I watched you make that panel just like it was nothing! Amazing skills Tony just shows what can be done with a bit of bravery and know how . Amazing viewing ….thanks 👍
I'm always in awe of these videos. I wish I could figure out how to do some of this stuff for my junk cars. I guess the first step is to cut into one of them and don't fear the mistakes.
Considering that this will prob be the last year for my car (07 G5) I've put a lot into it but, the rockers are done!!!! What a dream it would be to have you repair them properly!!!
Hey it's fun to watch a man who knows what he is doing! Great work as always Mr. Fitzee!!! It is a lot easier to watch you then go outside and do it myself!! Your show just keeps getting better and better!!
Very good instructional video on how to repair something that's impossible to repair. Not many fabricators would take on a vehicle as rusty as this one was to start with. That's one thing with doing this for yourself, imagine the repair bill if you had to pay someone to do this.
Hi Tony, this was a pretty complicated repair….I love your approach and doing it in steps…..you made it look easy enough,but,it was a complicated repair……amazing how much rust was just sitting up on the inner panel waiting to bust out. Thank you for sharing your knowledge and making this video. The repairs keep you busy and taping it takes time. Another great repair !
I am having a tough time repairing a drip rail on the front of a 1993 Dodge D150 pickup. I removed 3 inches of the outer roof and 3 inches of the inner roof. I fabricated the inner roof and welded it in. Tough job. I have now fabricated the outer roof skin and have to rebuild the front drip rail. Tough job but after watching you I feel a little more confident. I am not at your skill level (I wish I was) but I am going to take my time piece by piece. I have coated the inner skins with a marine epoxy. Dries like glass , slightly thick. I have used it before on sheet metal repair and absolutely no rust years after. Thanks for your video Len V 😅
Mr I have learn a lot from you I started watching your videos back when they had us locked up due to covid ,I'm restoring my OBS bronco, I took the skin top off cause I had liner holes and I had decided to trim off side rails but watching this video I'm going to make them back to original, thank you for sharing your skills your awesome, stick around!
Another brilliant video. Running out of ways to compliment them... Thanks again Fitzee, it obviously takes you a lot of extra time to make your work into a full on tutorial and edit the videos for (us) the channel. Hope you know how much we appreciate it 👍
That is stunning work! This video is a brilliant example of your method of breaking down a daunting task into small, manageable pieces. Thank you so much Tony
Enjoyed this video so much.... This is what I needed to see,, now I have some idea on how to tackle the roof /drip edge on my Old F-100.... Thanks again Tony, Excellent Tips....
And another fantastic Display of your talent me son......I am 70 years old, have built and repaired numerous cars and trucks......You have showed me tricks I wish I had known years ago.....Keep up the good teaching.....it is priceless. Have a good day bye.
Hi Tony, old Crusty is looking better and better. I had to make an inner cab corner for my truck because there were none available already made. I did it in multiple pieces more out of necessity than out of a plan. It came out pretty good and actually better than I expected with a light coat of kitty hair filler. Since the original panel was completely gone, I didn't really know what it was supposed to look like. It seems easier to put a little piece here and a little piece there, working as you go, untill it becomes one structure. Thanks for the video, they are very helpful! -mike
love all your tricks and tips Fitz like bringing the metal up to the line with a hammer. I've not seen this trick before good stuff. I used it before to get a sharper line but I've never done it to lower or raise the metal to the line. Great tips man. Your a true craftsman in your trade.
There’s just no substitute for experience, you’re just so quick and efficient at patching rust holes. I would have farted around for hours on that first rust hole you fixed, and you just warmed up on that like it was nothing. A pleasure to watch u work bud 👍
I'm about to replace a good inch or more in for my drip rails on my roof a 71 Chevelle and honestly what you've done here is a whole lot more involved Thx
I find the hardest bit of resto bodywork is getting the balance of 'don't cut off more than you need to' and 'don't be afraid to cut through bits that aren't rotten'. Vids like this have given me the confidence to really get into fixing up my cars properly.
I so look forward to your videos every week there is always something to be learned from your experiance in metal working thank you my friend . God bless take care.
Dang Tony, you never cease to amaze me sir. That came out amazing compared to why you started with. I pick up so many awesome tips and tricks watching your Channel. I'm so thankful for you sharing your knowledge. I always look forward to your next video. Keep up the awesome content. I love your channel Tony! Keep On Keeping On Brother!!! 👍🏻👍🏻👍🏻
Mr. Fitzee, Thank you for another amazing video! This is going to help me repair the gutters/drip rails on my 1962 F100 Unibody truck. Greatly appreciate you and the knowledge you are sharing with us.
More amazing techniques and why you use them. That's what makes your videos so valuable! How to work with thin steel is so frustrating....you just put more tools in my toolbox!
Oh my god! Shrinker & Strecher was used by Fitzie. It is like cheating! For sure you could do it only with a hammer? Great one again! Thank you for shering alm your tricks and skills with us. 👏👏👏
As always, Tony; it's Fitzabulous! I have the greatest respect for your ability and methods of attack! Well doneand a really enjoyable post which makes a complex job look easy.. though I doubt I could master it!
So amazing Tony, I removed my entire roof skin because of this very failure in my roof. I felt good about it because of all the other layers, but I can see I could have done it similar to what you did and it would have been perfectly fine. Oh well, I learned a bunch doing it the way I did.
Amazing Tony, just, simply, amazing! I have a complicated panel to sort out on my project. When I first started it about 5 years ago a replacement panel was available from BMW albeit expensive as always. Now there is no replacement available so have no choice but repair it. You give me the confidence to give it a go, many thanks.
I enjoy all your videos. You are so thorough in your explanation of all your methods. You are a very talented fabricator, and I appreciate you sharing your knowledge.
thank you so much i have been waiting and hoping for this video for so long...this is a job i have to do in the near future and must admit had me beat. i wondered what exactly i would be in for doing this and for the life of me had no idea having now watched you do it i feel very confident about doing and am actually looking forward to doing it thank you joe
it is in the case where the sheet metal is so thin that a MIG welder equipped with an infinite heat control proves its utility over one machine that have just some cogs for heat adjustment. repairing such a wreck is truly a patience play as about everything you touch is rust and crust. very good video.
Thought I was done, but found a similar flaw in the A pillar of my malibu. I'm lucky though, and know where I can just cut this part out of a good donor. Thanks for the inspiration again!
The ability to take flat scrap sheet metal scavenged from old office furniture and turn it into complicated body panels with nothing but basic shop tools is amazing!
That well insulated garage may become a more attractive place to be as the weather gets colder so I'm hoping to see more of that as we go along.
My whole family back home were bodymen. Brings back old garage memories. Lol. Love it!
Best video I've see on Drip Rail/roof repair! Gave me more confidence at attempting the same repair on a '55 Ford Fairlane.
Talk about God send. I’ve been stuck on my car…. Drip rails, roof structure. I’ll be watching this a few times over the next weeks
Tony, you are a master craftsman. Thank you for sharing all of your knowledge with us. Really appreciate it and really enjoy watching your educational videos.
That's no doubt going to be the cleanest, most rust free yota on the planet when you get done with it, it's amazing how much rust is hidden in such a little car, great tips as always Tony, can't wait for the next one
Rust is what killed them. Bulletproof mechanicals, but oh do they rust, that ones actually really good! 😀
Yep, even in Baltimore where vehicles suffer far less salt-induced corrosion, these Toyotas almost consistently met their end being driven to the scrapyard with their floors falling through
The tips were great. I was wondering how that was all going to fit together, you make it look so easy.
"Calm down, b'y! One step at a time!" You tell us, Tony! Love it!
Thank you so much.I was looking to fix drip rail on my Nissan sentra.Had no idea how to start.You gave me the inspiration.One big thing is not to overtime the process.
I Like the idea of using that RIng....I have used a Sand bag. I guess it does about the same thing. and just scrap around the shop.
Hi Tony, I've been following your channel for a while now, it inspired me to start my own channel, which is doing much better than I ever expected, much of what I've learned from you can be seen in my work, I, of course give you due credit for that 😊. The most useful thing I've picked up is the cut & butt process, it's close to what I used to do, but so much better.
Thank you so much for your time and willingness to share your years of knowledge.
Dave
I'm only a minute in and clicked like already, I know good work is coming!
I'm dong the roof on my truck now, so this is motivational for me. Thank you.
Fantastic repair. This makes me appreciate one of the few plus factors of living in California -- RUST FREE CARS (or nearly so, depending on location).
Tony, ALL of your videos make a daunting job much more approachable! YOU are a MASTER at this!
Your guidance and the way you explain the process is on another level! 💯👍
Thank you for sharing these skills, Sir!
It's definitely one of my all-time top channels that I follow!
Have a blessed day! Steve 👍
Hey Tony, lots of great tips! Again!;) Through trial and error I've found the same technique when I blow a hole. Thicken the edge of the hole and work back to the new metal. Drip rail!:( You helped me a year ago get through the roof edge rust on my 64 F100. Inner and outer hood lip as well. I've been using a high quality urethane sealant as a seam filler. Printable, long lasting and much cheaper. My first jeep was completed fourteen years ago and still holding up great. No, I don't drive it in the Wisconsin salt. Almost all of the rust repair I've seen is from seam sealer fail and dirt and debris trapping moisture. Got to clean and reseal those seams !:) Thanks for all the help!😊
This is the hardest part to repair on a car. The metal spreader surely is home built and I want to watch that vidya. Once again Fritz blows my mine with the ability to repair using simple basic tools.
FITZEE ive been doing this type of work for almost fifty years i learn from you your a credit to the profession many thx
Can’t believe I watched you make that panel just like it was nothing! Amazing skills Tony just shows what can be done with a bit of bravery and know how . Amazing viewing ….thanks 👍
I'm always in awe of these videos. I wish I could figure out how to do some of this stuff for my junk cars. I guess the first step is to cut into one of them and don't fear the mistakes.
I've learned so much from you Tony. I have a 1968 VW Beetle and learned to weld using your techniques. I will take a 2xl hoodie soon. Thanks!
Considering that this will prob be the last year for my car (07 G5) I've put a lot into it but, the rockers are done!!!! What a dream it would be to have you repair them properly!!!
Thank you for giving me the confidence to tackle my drip rail rust. Your channel is all anyone needs .
Some of these repairs, I think I might be able to do...but this one is clearly on another level!
Hey it's fun to watch a man who knows what he is doing! Great work as always Mr. Fitzee!!! It is a lot easier to watch you then go outside and do it myself!! Your show just keeps getting better and better!!
Very good instructional video on how to repair something that's impossible to repair. Not many fabricators would take on a vehicle as rusty as this one was to start with. That's one thing with doing this for yourself, imagine the repair bill if you had to pay someone to do this.
Keep coming back to your channel -watch your videos over and over for motivation and to learn your techniques- your the best keep them coming!
Hi Tony, this was a pretty complicated repair….I love your approach and doing it in steps…..you made it look easy enough,but,it was a complicated repair……amazing how much rust was just sitting up on the inner panel waiting to bust out. Thank you for sharing your knowledge and making this video. The repairs keep you busy and taping it takes time. Another great repair !
I am having a tough time repairing a drip rail on the front of a 1993 Dodge D150 pickup. I removed 3 inches of the outer roof and 3 inches of the inner roof. I fabricated the inner roof and welded it in. Tough job. I have now fabricated the outer roof skin and have to rebuild the front drip rail. Tough job but after watching you I feel a little more confident. I am not at your skill level (I wish I was) but I am going to take my time piece by piece. I have coated the inner skins with a marine epoxy. Dries like glass , slightly thick. I have used it before on sheet metal repair and absolutely no rust years after. Thanks for your video Len V 😅
Mr I have learn a lot from you I started watching your videos back when they had us locked up due to covid ,I'm restoring my OBS bronco, I took the skin top off cause I had liner holes and I had decided to trim off side rails but watching this video I'm going to make them back to original, thank you for sharing your skills your awesome, stick around!
That was a great demonstration. We’ll done Fitzee.
Another brilliant video. Running out of ways to compliment them... Thanks again Fitzee, it obviously takes you a lot of extra time to make your work into a full on tutorial and edit the videos for (us) the channel. Hope you know how much we appreciate it 👍
That is stunning work! This video is a brilliant example of your method of breaking down a daunting task into small, manageable pieces. Thank you so much Tony
Enjoyed this video so much....
This is what I needed to see,, now I have some idea on how to tackle the roof /drip edge on my Old F-100.... Thanks again Tony, Excellent Tips....
And another fantastic Display of your talent me son......I am 70 years old, have built and repaired numerous cars and trucks......You have showed me tricks I wish I had known years ago.....Keep up the good teaching.....it is priceless. Have a good day bye.
Good stuff Tony. Thanks again for sharing your skills with us.👍👍❤
Hi Tony, old Crusty is looking better and better. I had to make an inner cab corner for my truck because there were none available already made. I did it in multiple pieces more out of necessity than out of a plan. It came out pretty good and actually better than I expected with a light coat of kitty hair filler. Since the original panel was completely gone, I didn't really know what it was supposed to look like. It seems easier to put a little piece here and a little piece there, working as you go, untill it becomes one structure. Thanks for the video, they are very helpful!
-mike
As you said. A new day and new rust. I have had many many of them!
Thanks mate. 150 videos in and I'm still learning from you. It is much appreciated.
love all your tricks and tips Fitz like bringing the metal up to the line with a hammer. I've not seen this trick before good stuff. I used it before to get a sharper line but I've never done it to lower or raise the metal to the line. Great tips man. Your a true craftsman in your trade.
There’s just no substitute for experience, you’re just so quick and efficient at patching rust holes. I would have farted around for hours on that first rust hole you fixed, and you just warmed up on that like it was nothing. A pleasure to watch u work bud 👍
You are such a great teacher, simple explanations every step of the way. IMO the best on UA-cam in this subject.
MOST CERTAINLY I'll stick around!! Your work is as interesting as can be. Greetings from Ohio.
Amazing work as always Tony. You make things look easy. I always look forward to the inspector coming out and checking your work.
I'm about to replace a good inch or more in for my drip rails on my roof a 71 Chevelle and honestly what you've done here is a whole lot more involved Thx
I find the hardest bit of resto bodywork is getting the balance of 'don't cut off more than you need to' and 'don't be afraid to cut through bits that aren't rotten'. Vids like this have given me the confidence to really get into fixing up my cars properly.
Looks good Fitzee! I’ll bet the roof sounds real solid when you rap on it!
Tony, you need to offer some official Fitzee's coveralls. The tips were good!!
Great job could watch your videos for hours keep up great work 👍
Thank's very much .For letting me watch and learn .From some one like you .that is so good at his work .
Thanks Fitzee for showing these three layer panel joins in plain English,using basic tools,you have inspired me to no end.
I so look forward to your videos every week there is always something to be learned from your experiance in metal working thank you my friend . God bless take care.
You make it look so easy Fitzee. Good job bro.
Dang Tony, you never cease to amaze me sir. That came out amazing compared to why you started with. I pick up so many awesome tips and tricks watching your Channel. I'm so thankful for you sharing your knowledge. I always look forward to your next video. Keep up the awesome content. I love your channel Tony! Keep On Keeping On Brother!!! 👍🏻👍🏻👍🏻
I was wondering, rather fearing how to fix my gutters.
Now I have a plan, do it like you showed us on this video !
Thanks.
Mr. Fitzee, Thank you for another amazing video! This is going to help me repair the gutters/drip rails on my 1962 F100 Unibody truck. Greatly appreciate you and the knowledge you are sharing with us.
You are an inspiration! Thanks you for sharing your expertise and skills!
More amazing techniques and why you use them. That's what makes your videos so valuable! How to work with thin steel is so frustrating....you just put more tools in my toolbox!
An excellent explanation!!! Worth watching many times and get more knowledge! Thank you Tony!!! Now I have an excuse to get a shrink-stretcher!!!!!
I welded up some 1mm sheet metal "Fitzee style" the other day, worked a charm!
NICE WORK TONY 👍👍👍👍👍👍
Great video, thanks again, all the best to you and your loved ones
Fitzee all those years really come out in your metal work.. i always look forward to you videos. Thanks. You still need to protect them eys
Always inspirational watching your clips.thanks for sharing your knowledge and experience. Always learning something new.
Love the detail you provide, thank you so much
Oh my god! Shrinker & Strecher was used by Fitzie. It is like cheating! For sure you could do it only with a hammer?
Great one again! Thank you for shering alm your tricks and skills with us. 👏👏👏
Would like to see the Toyota when it’s finished!
So nice to see your work and hear you explain your process! Thank you for these videos!
As always, Tony; it's Fitzabulous! I have the greatest respect for your ability and methods of attack! Well doneand a really enjoyable post which makes a complex job look easy.. though I doubt I could master it!
Just start and it will come to you with practice
So amazing Tony, I removed my entire roof skin because of this very failure in my roof. I felt good about it because of all the other layers, but I can see I could have done it similar to what you did and it would have been perfectly fine. Oh well, I learned a bunch doing it the way I did.
Think if I had the option I replace the whole skin. You will get a much better result and can look after those trouble areas with skin off
More beautiful work , this is a great lesson in saving a car that looked so bad it looked impossible , But not for you !
Amazing Tony, just, simply, amazing! I have a complicated panel to sort out on my project. When I first started it about 5 years ago a replacement panel was available from BMW albeit expensive as always. Now there is no replacement available so have no choice but repair it. You give me the confidence to give it a go, many thanks.
You are a true craftsman, I watch your videos with amazement Bill N LI NY
That was another awesome video Tony full of tips. Great day hanging out in the shop with you thanks for taking us along
Another great one.
Love the shrinker stretcher stand, proves that simple is better.
Outstanding Tony! I stay 100% away from old vinyl tops bc of this. Great content as usual.
Fantastic demo. Never fun playing with 22ga.
Another excellent video by the Master Welder.
Thanks Tony the tips were great,time for me to tackle mine :)
I enjoy all your videos. You are so thorough in your explanation of all your methods. You are a very talented fabricator, and I appreciate you sharing your knowledge.
One of my 1st projects was a drip rail. I wish this video existed back then. I almost feel like doing it again properly. One of your best videos.
It has come a long way looking very good well done sir Tony
Great work young man and a great instructional video too!
The sheet metal Professor. Amazing work!
Thank you. I learned a few things today.
Amazing craftsmanship Fitzee!!
Thanks for sharing your talent with us all Tony! Truly enjoy and appreciate you! Amazing work as always!
Good job teaching now if I could learn as well thanks.
I've done body work for 30 years or so, keep up the good work. I enjoy watching your videos, especially since I've retired.
Great craftsmanship
Another masterpiece Tony. Not rusty Crusty anymore, now shiny Toy.
Thanks for sharing great video. Now I know what I’m up against in my 82 Toyota pickup rusty drip rail. This is a big help.
Great work as always Tony. Looking forward to Crusty racing down the track!
Wow! Thanks for the video. Fixing driprails seemed overwhelming. I hope to use your approach and save my basket case. Fearless Fitzee to the rescue!!!
thank you so much i have been waiting and hoping for this video for so long...this is a job i have to do in the near future and must admit had me beat.
i wondered what exactly i would be in for doing this and for the life of me had no idea
having now watched you do it i feel very confident about doing and am actually looking forward to doing it
thank you joe
Beautiful work thanks for the insight!
it is in the case where the sheet metal is so thin that a MIG welder equipped with an infinite heat control proves its utility over one machine that have just some cogs for heat adjustment.
repairing such a wreck is truly a patience play as about everything you touch is rust and crust.
very good video.
Great work Tony. The 'datsun' sorry toyota! 😆 is coming on nice.
Great job Fitzee, Crusty is really taking shape. Thank you for sharing. Be good and stay safe. 👍
Awesome video on part two the right side of Crusty roof and rub raiI. I learned a lot and the tips were good.
Thought I was done, but found a similar flaw in the A pillar of my malibu. I'm lucky though, and know where I can just cut this part out of a good donor. Thanks for the inspiration again!