I brought the off road connection pipes,does the 3 inch go towards the headers or, does the smaller 2.5 side go towards the headers because I can't clamp the 2.5 to a 2.5 leading towards the exhaust,I can't fit one over the other or are they not supposed to over lap or just kiss each other and add a clamp?
I'm guessing you probably got it together by now, but the 3 inch side goes to the headers and 2.5 to rear section of exhaust. The 2.5 doesn't slip over, both ends just meet up, and you should have used the original clamp that came on the car to slide over both ends and hold them together.
@@tripphopper3374 thank you,I did eventually figured it out,did more homework on exhaust clamps. I did not know they could both butt together.I thought all exhaust pipe over lapped each other,unless you weild it.First time messing with exhaust on a car.
You can probably get by with the stock ones, but you need to put boots on them to keep from burning them. I order 1in longer for my car I have the black car.
We actually use the stock exhaust manifold gasket they were still in great shape. The header bolts were replaced with new ones and anti-seize was used when installed
We use the bolts that came with this kit. When I installed the same headers on my black car I just bought headers only, and bought my header bolts and O2 extensions off of eBay I came out about $30 cheaper
My favorite part other than the sound was the lack of ventilation. Lol. After 10 or so beers you are going to forget to vent the garage and never wake up. Just saying. Play smart
Since the oem has 2 oxygen sensors cables on each side. What did you guys do with the 2nd one after the catalyptic converter? Since these Speed engineering headers only have for 1 sensor
We just unplugged them and I highly recommend maybe getting some kind a ziplog bag and zip tied over the plug so any water doesn’t get in there and corrode anything. The tuner will be able to tune those out
Yeah it’s weird how these are made because we put the same set on my buddy Yellow Camaro and they actually hit the frame just a tad bit, but on my black car they didn’t hit
Yeah I bought the headers only I bought mine extensions and head bolts off of eBay and I came in little bit cheaper almost about $30 cheaper than what this guy did
@@ky_chevy2824 yes sir. Just waiting on getting the Headers ceramic coated and looking to match up some Hi flow cats. I want to do the off road pipes but I don't think my wife will enjoy the smell , actually I don't think I will like the smell either lmao
@@ky_chevy2824 yeah I have a 2012 I wanna put some on mine. Worried about having to have to pull a head if it happens. I would deff replace with new ones tho. Just to have them newer and more reliable
@@triggas80 What I would do like we did in this video and my other video we started the car up and let the kids get little warm that way the metal will expand and I would break them loose while it’s warm. I just don’t get the car too hot because you won’t be able to get close to the headers without burning yourself
@@ky_chevy2824 good idea frl. I put headers on my Tahoe a while back more so for the sound and broke both bolts in the back on either side. Passenger side we drilled out and fixed the driver side we order a block manifold clamp cus you cant get in there to drill without removing the head lol
I actually brought it from a guy in hopes it would work on mine. Unfortunately it didn’t so I sold it to him. I brought it from a friend he got something eles
Lol not then.. 🤣 I’m talking about starting at 10:24 time in the video, you cut the video off right as he was about to drive off..🤦🏽♂️ Really would’ve liked to hear it drive away.. to hear it at normal every day speeds... But love the car sounds great.. I was jus on here to see how tedious this job was.. I have a set of Texas speed longs waiting to go in my 2011 SS convertible..
All the jobs not too bad depends on how many miles is on the car you have to worry about breaking boats off in the head. If you can find you another person that mechanically inclined you can get it done in about three hours start to finish.
I’ve heard good things about speed engineering ... Jorge Vlogs used it on his 19 SS ...
Yes sir the fitment is excellent I’ve heard other people talk about cooks in Texas speed that they have to modify the pipe around the steering column.
I orders the headers last night and didnt get a shipping info i was wondering how long they take to ship
When I ordered mine it took about four days to get. But with today’s things going on it may take a little longer
I have had them in my car about 2 yrs no problems no leaks. Way to go man
Yes he very happy with them, I have a set on my black car
Did you have to buy the connection pipe from stock exhaust to header?
When I bought the headers, they came with the catless pipes which connected to the stock exhaust
I brought the off road connection pipes,does the 3 inch go towards the headers or, does the smaller 2.5 side go towards the headers because I can't clamp the 2.5 to a 2.5 leading towards the exhaust,I can't fit one over the other or are they not supposed to over lap or just kiss each other and add a clamp?
I'm guessing you probably got it together by now, but the 3 inch side goes to the headers and 2.5 to rear section of exhaust. The 2.5 doesn't slip over, both ends just meet up, and you should have used the original clamp that came on the car to slide over both ends and hold them together.
@@tripphopper3374 thank you,I did eventually figured it out,did more homework on exhaust clamps. I did not know they could both butt together.I thought all exhaust pipe over lapped each other,unless you weild it.First time messing with exhaust on a car.
I wanna get some for my 14 SS, is there a difference with mine being an automatic?
No sir they are the same
Did you need extended spark plug wires?
You can probably get by with the stock ones, but you need to put boots on them to keep from burning them. I order 1in longer for my car I have the black car.
@@ky_chevy2824 did you guys get and use the multilayer steel gaskets and bolts because i seen a few videos were people use oem
We actually use the stock exhaust manifold gasket they were still in great shape. The header bolts were replaced with new ones and anti-seize was used when installed
@@ky_chevy2824 did you use the header bolts that are in the kit or did you order some?
We use the bolts that came with this kit. When I installed the same headers on my black car I just bought headers only, and bought my header bolts and O2 extensions off of eBay I came out about $30 cheaper
Was there any leaks with those clamps??
Not at first but after a few hear cycles they did. I just retighten them up good to go
Which are the o2 sensors that go on the headers? The primary ones or the bottom ones? I believe for the primary ones i would need 02 extensions
We need the ones for the primary ones closer to the engine
Do I need the o2 extensions? Or can I install without them
Yes you need them
Did you have to buy new wires or did they not touch the headers?
He opted for a new set of wires because the car was going to the shop to have a cam put in. But I don’t see why you couldn’t use your stock wires
When you put the connection catless pipe to the exhaust did you have trouble connecting them?
My favorite part other than the sound was the lack of ventilation. Lol. After 10 or so beers you are going to forget to vent the garage and never wake up. Just saying. Play smart
Well unfortunately I do not drink beer or any alcohol so I wouldn’t have that problem
@@ky_chevy2824 I get it bud but just looking out. Cool car man.
Thank you
Is it with the stock Npp exhaust?
Yes sir
Any ticking noises when driving next to walls ?
Not that I know he hasn’t mention nothing bout noises
Did you remove the tower brace? My 1LE has it.
Yes we did makes easy to access,
Also everything goes out/in from the bottom
how much hp gain??
Don’t know did not dyno it beforehand, but before the cam was put in it dyno out 399 hp
Man that thing sounds damn good!
Sounds awesome
Thank you
Since the oem has 2 oxygen sensors cables on each side. What did you guys do with the 2nd one after the catalyptic converter? Since these Speed engineering headers only have for 1 sensor
We just unplugged them and I highly recommend maybe getting some kind a ziplog bag and zip tied over the plug so any water doesn’t get in there and corrode anything. The tuner will be able to tune those out
Sounds great
Thank you sir
Any way i could talk to you guys personally dont wanna be weird just wanna get some help before i buy got a 2014 SS
Yeah hit me up on Ig Z71_kentucky
Did the passenger side rub the frame?
No had 1/4 inch of Clarence
@@ky_chevy2824 that’s awesome!
Mine hit the frame
Yeah it’s weird how these are made because we put the same set on my buddy Yellow Camaro and they actually hit the frame just a tad bit, but on my black car they didn’t hit
@@ky_chevy2824 for sure. I’ve heard of some also touching the steering shaft too.
@@WickPerformance we haven’t had no problems out of both cars that we install them on, with that problem steering shaft
Man that thing is loud
Did you use the 02 extension that came with the package ?
Yes we did
@@ky_chevy2824 okay thanks I just got mines in today
Yeah I bought the headers only I bought mine extensions and head bolts off of eBay and I came in little bit cheaper almost about $30 cheaper than what this guy did
@@ky_chevy2824 awww okay one more thing where did you buy or can I buy better gaskets ?
Honestly we reuse the factory metal gaskets because they were still good shape I highly suggest not using those cheap gaskets they send.
Both of your cars sounds killer!!!!!👍😎👊🔥
Thank you you have the same results too when you are done
@@ky_chevy2824 yes sir. Just waiting on getting the Headers ceramic coated and looking to match up some Hi flow cats. I want to do the off road pipes but I don't think my wife will enjoy the smell , actually I don't think I will like the smell either lmao
Any broken bolts?
No all the bolts came out easy didn’t have no issues. But I highly recommend replacing exhaust bolts when doing the headers
@@ky_chevy2824 yeah I have a 2012 I wanna put some on mine. Worried about having to have to pull a head if it happens. I would deff replace with new ones tho. Just to have them newer and more reliable
@@triggas80 What I would do like we did in this video and my other video we started the car up and let the kids get little warm that way the metal will expand and I would break them loose while it’s warm. I just don’t get the car too hot because you won’t be able to get close to the headers without burning yourself
@@ky_chevy2824 good idea frl. I put headers on my Tahoe a while back more so for the sound and broke both bolts in the back on either side. Passenger side we drilled out and fixed the driver side we order a block manifold clamp cus you cant get in there to drill without removing the head lol
Yeah same way on my 05 Silverado broke But I had to do head gaskets on mine anyways so I wanna head and didn’t care if they were
My buddy is asking if you'd be kind enough to share part numbers? Thank you
Yes I look them up
I put them in the description thanks for watching
Great job bro, badass
Car sounds awesome just ordered myself some as well for my 14’ 1le, also where’d he get the wing from?
I actually brought it from a guy in hopes it would work on mine. Unfortunately it didn’t so I sold it to him. I brought it from a friend he got something eles
Man that’s so effin messed up of you not to let us hear it drive off at the end of the video..
It was 1 am My neighbors would’ve been pissed
Lol not then.. 🤣
I’m talking about starting at 10:24 time in the video, you cut the video off right as he was about to drive off..🤦🏽♂️
Really would’ve liked to hear it drive away.. to hear it at normal every day speeds...
But love the car sounds great.. I was jus on here to see how tedious this job was.. I have a set of Texas speed longs waiting to go in my 2011 SS convertible..
All the jobs not too bad depends on how many miles is on the car you have to worry about breaking boats off in the head. If you can find you another person that mechanically inclined you can get it done in about three hours start to finish.