WorkBee CNC Upgrade Part 2 the Spoil Board

Поділитися
Вставка
  • Опубліковано 17 жов 2024

КОМЕНТАРІ • 2

  • @MisterMakerNL
    @MisterMakerNL 2 роки тому

    I used the 12mm recommended waste-board, but after flattening I am left with 10mm which is waaaay to thin.

    • @smedleywooddesign2219
      @smedleywooddesign2219  2 роки тому

      Yes, that is thin, I start out with .75" (19mm) for my waste-board and surface about .5mm off to flatten it.