Z Axis Upgrade to the WorkBee CNC

Поділитися
Вставка
  • Опубліковано 28 січ 2025

КОМЕНТАРІ • 16

  • @Festivejelly
    @Festivejelly Рік тому

    The great thing about having a CNC is that you can CNC your own upgraded parts. I tend to 3d print all mine first to check they fit etc, then just machine them. I think the HGR15 are the way to go over the 12.

    • @Festivejelly
      @Festivejelly Рік тому

      Also HGR rails would be better for CNC than MGN

    • @smedleywooddesign2219
      @smedleywooddesign2219  Рік тому

      I did end up upgrading my X axis with HGR 15 Rails, it made the whole assembly a lot more ridged. I also 3D print all of my part before machining, it makes it a lot easier to correct mistakes in the design. Thanks for you comments.

  • @MisterMakerNL
    @MisterMakerNL 2 роки тому

    I by coincident had a collision yesterday and noticed some play on the Z-axis also, hopefully I can get it out.

  • @lukeroberts5885
    @lukeroberts5885 Рік тому

    Did you have to shim the nut block for the leadscrew on the new plates? I've just started doing this upgrade to my machine and looks like that might be required.

    • @smedleywooddesign2219
      @smedleywooddesign2219  Рік тому

      Yes, you will need to shim the nut blocks, you can find the 3D files for them on my thingiverse page. www.thingiverse.com/thing:5883920/files

    • @lukeroberts5885
      @lukeroberts5885 Рік тому

      Sweet! Sorry, I must've missed that bit. Thanks for sharing the video and part files.

  • @graveurgraveur2691
    @graveurgraveur2691 2 роки тому

    Try the RatRig Killerbee upgrade for Workbee

    • @smedleywooddesign2219
      @smedleywooddesign2219  2 роки тому +1

      I looked at the Killerbee and the Queenbee, but shipping is way to high right now. Thanks for watching!

  • @metsrok91
    @metsrok91 Рік тому

    Can I buy those 3d printed parts off you? I’ve been feeling pretty helpless about this whole issue, thanks!

    • @smedleywooddesign2219
      @smedleywooddesign2219  Рік тому

      Sure, which 3D prints are you referring to?

    • @metsrok91
      @metsrok91 Рік тому

      All the plates required to mount the linear rails, do you have a Facebook or an email?

    • @smedleywooddesign2219
      @smedleywooddesign2219  Рік тому

      @@metsrok91 Here is my email, smedleywooddesign@gmail.com

  • @moaijeff1230
    @moaijeff1230 Рік тому

    Do you have the files for the plates anywhere?

    • @smedleywooddesign2219
      @smedleywooddesign2219  Рік тому +1

      I just put them on Thingiverse. www.thingiverse.com/thing:5883922/files

    • @moaijeff1230
      @moaijeff1230 Рік тому

      @@smedleywooddesign2219 You are amazing, thank you!