Setting cab controls on NCE Power Cab
Вставка
- Опубліковано 18 жов 2024
- Hello and welcome back to another video from Chelmswood Junction.
In this video after a request from a subscriber I show you how to change the cab settings on the NCE Power Cab to use the option key for the extended functions on your sound locos.
Hope you enjoy the video please feel free to like comment share and subscribe.
Hope you enjoy the video as always please feel free to like, share, comment and subscribe.
You got so good at the tech side of the dcc controls.
shame i had to stop because we moved but we had to move and we love our new house.
Hi again. Finally got round to doing the changeover. Your tutorial was very helpful.
Hello
And glad my video was of help to you means alot to get such a nice comment like yours.
Peter
Hi peter
Great tutorial video easy to understand and follow.
hello friend
thank you for the nice comments as always and i do try and make my videos easy to follow.
Your tutorial was brilliant. Very very helpful.
thank you glad you enjoyed the video.
peter
Great video, thank you so much, sometimes.reading the book it's greek and confusing seeing it done makes easy to follow.
Thank you for nice comment glad it was of help to you.
Peter
Excellent, learn something new every day :)
Glad you liked the video more to come in the future
Thank you for that Peter that's was very helpful if you are ever over my area give me a shout and I'll be glad to show you strathmore Road junction
Where are you based anthony ???
And the same goes to you all are welcome to come and view and maybe help me build my layout
@@chelmswoodjunction I am in Hinckley
Your not far away from me only about 20 odd miles
Hi quick question how many locos will the nce power cab hold amount you can programme into the nce power cab thanks
Hi Andrew
That is a good question and one i can try and answer but dont take my word for it you can program a 4 digit address ranging from 0000 to 9999 and short address from 1 to 127.
So far I have 15 locomotives programmed in and have no trouble so I would easily say you can do at least 100 maybe more.
Hope this helps.
Peter from Birmingham
You can ONLY program 12 locomotives with the Power cab and Run from 4-6 N scale at one time. 👍👍
Hi good evening, can i control the steam loco "smoke" with NCE powercap ? or loco automatic control smoke based on sound ?
If the smoke generator is on a function key then it should work by turning that function on if it's not refer to your instructions that came with the loco.
Hope this helps.
Peter
Does this work for the procab?
Hello
I think in would definitely work with the pro cab as tge Pro cab has alot more functions that the power cab doesn't.
Glad you liked the video and I hope it helped.
Peter
Hello, Is it possible to hock up as SB3a to JMRI.
What dcc controller do you have and to use jmri you would need a dcc computer interface and I don't know what a SB3a is
I followed your instructions but noticed with engine sound running pressing the horn button 2 when the horn activates the engine sound goes quiet or off momentarily and comes back on which does not happen on 94
Activating the horn shouldn't lower the engine sound
@@chelmswoodjunction I assure you the engine sound goes off momentarily while say you activate the horn but comes back as the horn finishes it is almost imperceptible but I heard it .By the way the video was extremely helpful and well thought out .
Thank you for your nice comments and I'm glad the video was a help to you.
Peter
The NCE SB3a is the earlier model of a NCE SB5
Then all you will need is the computer interface module then you should be good to go but do your home work first as I have never gone down this route before.
Peter