Nice job buddy, I appreciate the detail you are putting in to these videos. I'm binge watching them right now, I have a 1993 Red Ford Lightning that I just love 👍
87-96 Ford Bronco/ OBS Ford F-Series Bucket Seat Cushion is on sale for $135 plus ship. Will not fit 40/20/40 (these are in preorder status) I take Venmo, PayPal, Zelle, Cashapp or mail me a check. Email me at n2kpi@yahoo.com for more instructions. Please remember to include your full name, EMAIL and mailing address
Can't praise you enough for quality of explaining how to do it. I can't remember when or if, I ever, saw a video that good, that simple to understand and that easy to follow.
My whole deal here went crazy, Now have over full reading, temperatures all the way up, the oil presser all the way over, Battery’s charge is dead on 0-, told could be a ground, cleaned all I could find, What happened was moving it on a trailer and forgot to put in gear and front wheels rolled off end of trailer and bottom out on frame, Any ideal what happed anyone
Dash bezel's for OBS F150 are readily available, Have you ever tried to modify "cut in the defrost button" to a F150 dash bezel? So it will fit a OBS 94 Bronco?
Thank you for this detailed instruction to mitigate damage to the parts. I have a 97 F-250 I purchased and the prior owner busted this bezel and it makes noise when driving. I also have screws missing that hold my lever in the dash and it just sits inside. Can you tell me the size of the screws that attach the paddle switch to the back of the dash bezel. Mine missing there. Also, do you know the size of the screws behind the two horizontal bars that hold the bezel to the dash. I am replacing the dash bezel and and going to the store to buy the screws. Thank you!
Disconnect the steering shaft on the hood. Then on the inside of the vehicle, you’ll want to unscrew five or six 3/8 self tappers that hold the base of the steering column into the firewall. You’ll have to remove the column trim and your shifter arm indicator cable. Then 4 bolts on a silver aluminum bracket under dash. Then yank it out.
Thanks for the great info. does anyone know where to buy the felt clips and rubber tabs for the back of the bezel? For some reason most of mine are missing.
Great video's they been lots of help. My dad has the 96 eddie and lately its been one thing or other lol. Maybe you will have a video on the overhead temperature computer display
Before I could get the screw driver to remove the switch the casing snap off before could even begin from pulling out slightly Do you have a replacement plastic cluster in stock?
@@BroncosandPartsGarage ok I’ll try this first and see how it goes the rear window switch one busted so see if I can build it back up to support it with your fix Thanks
@@BroncosandPartsGarage also any video on how to fix the ash tray mine won’t close shut , something broke to keep it on track and close , I’m sure it maybe easy but I have no ideal and you are making me kinda of like working on automobile something I usually don’t enjoy or good at so appreciate your n instructions that are very thorough 👍
Hi again can you recommend which light bulbs, to replace on cluster that are the safety ones to replace since have it out and doing the LED for the 11 lights ? Thanks
Very helpful. Thank you. I've got a F350 and I've already watched several of your other great videos to fix, what seem to be, common issues on these old Ford's. Keep up the good work!!
Your videos are awesome. My search for an OBS Ford just ended with purchasing a 96 F350 CC 4x4. I'll be able to use quite a bit of the info you've provided across your video collection. Thanks for the help.
If ya need a truck for more content, let me know, i have a 1996 F-250 7.3 diesel that needs some tender loving care, but i think its worth saving. A failed neck and back surgery sort of limits my abilities. That was my attempt at tugging on your heart strings😳👌
Awesome! Thank you!!! How about a video on the dash lights. About half of mine are out, but who needs to know how fast you're going in the dark anyways 🤷🏼♀️😁
I appreciate the video as it helped me greatly with the bezel removal on my 1994 XLT. DO you have a video on how to replace the 4x4 and low range switches?
Remove it. Gets some jb weld epoxy. Slice up a credit card as a binder over crack. Epoxy from the backside over the cc strips. Make sure the seam is tight. Or buy one from me.
Is there no source on the entire planet for a new dash? Anything from the 90's will be just like mine, the top 4 mounting points will be either weakened or broken from the sun coming through the windshield and 30 years of vibration. This is simply driving me crazy trying to find one; you can't. Any experience you might have would be appreciated.
The switch is pretty strong. When you push the screwdriver in the slot push the blade of the screwdriver towards you. You’re just releasing a small tension clip. As a last resort you can just pull it straight off. The switch is pretty durable
Great video. I had to remove the column cover on my 92 F250 to check od wires on the shift lever because of limp mode. My bezel was on loosely so I'll check out your other video on how to repair the clips. Oh, and just subscribed
Please don’t forget to subscribe for more content !!
Nice job buddy, I appreciate the detail you are putting in to these videos. I'm binge watching them right now, I have a 1993 Red Ford Lightning that I just love 👍
Thanks. I’ve had a few 1st Gen ⚡️ come thru here. We never scrap them 100%. They always live on!! One of my favorite trucks of the era.
@@BroncosandPartsGarage I would love to get a Bronco of that era too but dang the prices have gone crazy on them for a decent one.
87-96 Ford Bronco/ OBS Ford F-Series Bucket Seat Cushion is on sale for $135 plus ship. Will not fit 40/20/40 (these are in preorder status)
I take Venmo, PayPal, Zelle, Cashapp or mail me a check.
Email me at n2kpi@yahoo.com for more instructions.
Please remember to include your full name, EMAIL and mailing address
Can't praise you enough for quality of explaining how to do it. I can't remember when or if, I ever, saw a video that good, that simple to understand and that easy to follow.
Wow, thanks!
My whole deal here went crazy, Now have over full reading, temperatures all the way up, the oil presser all the way over, Battery’s charge is dead on 0-, told could be a ground, cleaned all I could find, What happened was moving it on a trailer and forgot to put in gear and front wheels rolled off end of trailer and bottom out on frame, Any ideal what happed anyone
I have no idea. Dang
Do you have a video on bench to 40-20-40 seat conversion?
I don’t. But it bolts in same as buckets. It needs to be pulled from an extended cab pick up truck to fit our broncos properly.
Dash bezel's for OBS F150 are readily available, Have you ever tried to modify "cut in the defrost button" to a F150 dash bezel? So it will fit a OBS 94 Bronco?
I’ve seen it done. Most look like 💩
Thank you for this detailed instruction to mitigate damage to the parts. I have a 97 F-250 I purchased and the prior owner busted
this bezel and it makes noise when driving. I also have screws missing that hold my lever in the dash and it just sits inside. Can you tell me the size of the screws that attach the paddle switch to the back of the dash bezel. Mine missing there. Also, do you know the size of the screws behind the two horizontal bars that hold the bezel to the dash. I am replacing the dash bezel and and going to the store to buy the screws. Thank you!
Email me. It’s in the video description. I can mail you the screws. Just pay shipping. I have pails of them
Do you have a video on how to remove the steering column on a 1989 Full size Bronco EB ?
Disconnect the steering shaft on the hood. Then on the inside of the vehicle, you’ll want to unscrew five or six 3/8 self tappers that hold the base of the steering column into the firewall. You’ll have to remove the column trim and your shifter arm indicator cable. Then 4 bolts on a silver aluminum bracket under dash. Then yank it out.
Thanks for the great info. does anyone know where to buy the felt clips and rubber tabs for the back of the bezel? For some reason most of mine are missing.
Thanks. I sell the clips.
Great video - thanks for the clear tutorial!
Glad it was helpful! It was my very first video, and probably the one I most proudest about next to the wobbly shifter arm video
good stuff, can you steer me toward the bezel repair for the obs bronco?
It was may ver for video. Just scroll down and you’ll find it on my page
Love your vids. Straight and to the point!
Thank you
Fantastic! not too slow, no repeating or endless yammer! Exactly what I need to know, little more, but not that annoying.
Glad it was helpful!
Fantastic video - awesome detail and tips.
Thank you. Hope it helped.
Where can I find those dash trim pieces?
Email me. I sell them.
Have you ever pulled the entire dash?
Yes. It’s very simple and takes about 20 minutes once the steering column has been dropped.
Great video's they been lots of help. My dad has the 96 eddie and lately its been one thing or other lol.
Maybe you will have a video on the overhead temperature computer display
I offer a repair service for them. $80. Includes return shipping. My email is in video description. Thank you!!
Before I could get the screw driver to remove the switch the casing snap off before could even begin from pulling out slightly
Do you have a replacement plastic cluster in stock?
I sell the clusters and black bezel. Email me. Link to repair video!
ua-cam.com/video/48k4tNgLews/v-deo.html
@@BroncosandPartsGarage ok I’ll try this first and see how it goes the rear window switch one busted so see if I can build it back up to support it with your fix
Thanks
@@BroncosandPartsGarage also any video on how to fix the ash tray mine won’t close shut , something broke to keep it on track and close , I’m sure it maybe easy but I have no ideal and you are making me kinda of like working on automobile something I usually don’t enjoy or good at so appreciate your n instructions that are very thorough 👍
Hi again can you recommend which light bulbs, to replace on cluster that are the safety ones to replace since have it out and doing the LED for the 11 lights ?
Thanks
Do you have a replacement plastic dash in its entirety?
Yes. Year and color?
@@BroncosandPartsGarage 1995 the Eddie Bauer tan/mocha
I just can not get the light button thing off
You can. Just get small screwdriver. It’ll release the spring clip on the light knob
Very helpful. Thank you. I've got a F350 and I've already watched several of your other great videos to fix, what seem to be, common issues on these old Ford's. Keep up the good work!!
Thanks. I hope it helped
Your videos are awesome. My search for an OBS Ford just ended with purchasing a 96 F350 CC 4x4. I'll be able to use quite a bit of the info you've provided across your video collection. Thanks for the help.
Congrats! Email us with any help
If ya need a truck for more content, let me know, i have a 1996 F-250 7.3 diesel that needs some tender loving care, but i think its worth saving. A failed neck and back surgery sort of limits my abilities. That was my attempt at tugging on your heart strings😳👌
Location?
Thanks so much for the video. Mice have built nests in my air ducts. Smells horrible and bits of paper keep blowing out Wish me luck
Oh no! Lol. It can all be cleaned!!
Awesome! Thank you!!! How about a video on the dash lights. About half of mine are out, but who needs to know how fast you're going in the dark anyways 🤷🏼♀️😁
No problem. That’ll be a fun one
@@BroncosandPartsGarage How about I just fly you up to Alaska and you can use my rig to make videos? 😁
@@jennifertanner2546 join Broncos and Parts FB group!
@@BroncosandPartsGarage I follow you on Instagram as @flyingpigartglass but I'll look you up on. FB
Awesome video. Thanks
Thank you
Awesome huge help
Thank you. Glad it helped
I appreciate the video as it helped me greatly with the bezel removal on my 1994 XLT. DO you have a video on how to replace the 4x4 and low range switches?
Once bezel is off, just unscrew selector, unplug it, screw in new part. I sell them too.
Hello Chris !, my bezel is cracked at 12 o' clock what product would you suggest to make this repair?
Remove it. Gets some jb weld epoxy. Slice up a credit card as a binder over crack. Epoxy from the backside over the cc strips. Make sure the seam is tight. Or buy one from me.
Thank you for saving my sanity. Now, off to your how-to-fix video so I can hopefully get my tank selector switch fastened in place.
Glad it helped
excellent !!
Thanks
I just purchased an OBS 1995 F-150. Yourvideos are priceless time and mistake savers. Thanks for taking the time to post!
Thanks for watching!
Thank you!
No problem. Please subscribe!!
Is there no source on the entire planet for a new dash? Anything from the 90's will be just like mine, the top 4 mounting points will be either weakened or broken from the sun coming through the windshield and 30 years of vibration. This is simply driving me crazy trying to find one; you can't. Any experience you might have would be appreciated.
I sell complete dashes from 92-96. Email me
Plastic welder.
Awesome vid, saw the post on Facebook and instantly subscribe!
Thank you
Exelente! Muchas gracias y saludos desde Mexico 👍🏼🙏🏼
No problem.
I think a video that some may be interested in is replacement of the rear window motor and/or tailgate lock mechanism window switch repair
Done and Done!
Excellent. Thank you for your commitment to our Broncos!
Our pleasure!
This was so helpful thank you!! 🙏
Thanks for watching
Can you do a video on replacing the clock spring?
Yes. It’s actually really straightforward. Three tiny little clips hold it into place. It just slides onto the column.
Great vid. But I'm still stuck on the headlight know... can't get it to release.
The switch is pretty strong.
When you push the screwdriver in the slot push the blade of the screwdriver towards you. You’re just releasing a small tension clip. As a last resort you can just pull it straight off. The switch is pretty durable
Do you know how to fix the overhead consoles?
Yes, email me. You can send it too me and we can fix and ship back.
Great video. I had to remove the column cover on my 92 F250 to check od wires on the shift lever because of limp mode. My bezel was on loosely so I'll check out your other video on how to repair the clips. Oh, and just subscribed
Sounds good. Glad they helped!