FAST AWD RC Drag Truck | BIG Tires All the Way Around | Traxxas RC Car Slash Ultimate
Вставка
- Опубліковано 4 жов 2024
- New MSM Merch Now In STOCK!
msmvlog.com/co...
Thumb Steer Wheels for the Traxxas TQ Remotes - bit.ly/3vUPPBj
My Project Car:
Traxxas Slash Ultimate: bit.ly/3ieWdOv
Tekno Traxxas Slash 4x4 Big Bone Drive Shaft - bit.ly/3tWfXuz
Tekno Traxxas 4x4 Front Drive Shafts - bit.ly/3EAtmO8
Tekno Traxxas 4x4 Rear Drive Shafts - bit.ly/3lKxsdB
Proline Tundra Body - bit.ly/3eSBTAp
Paint by Celph Designs - / celphdesigns
Great First Hobby Grade RC Cars
Arrma Granite 4wd - bit.ly/3JdyABt
Arrma Senton 4wd - bit.ly/30NEk3x
Traxxas Slash 2wd - bit.ly/39TMvdu
Traxxas Stampede - bit.ly/3FeULEY
Traxxas Slash 4wd - bit.ly/3ecHH7h
Traxxas Rustler 4wd - bit.ly/30SeLyu
Latrax Prerunner - bit.ly/33IwJEF
Latrax Teton - bit.ly/37EFIX0
Axial SCX24 - bit.ly/3CAC4e8
Traxxas Bandit - bit.ly/32i4ZFY
Slash Builders Kit -
Favorite Tools (Updated):
Protek Drill Tips - bit.ly/324wX58
Protek Hex Drivers -
Protek Nut Drivers - bit.ly/2NSjfLc
Compact Set (Basher tools) - bit.ly/2GhibQC
MIP Thorp Drivers - bit.ly/2GKSIwu
MIP Thorp Nut Drivers - bit.ly/3irCJEs
Dewalt Electric Screwdriver - amzn.to/3jGn3wI
Oil Bag (Must have) -
Best Beginner RC Car:
Slash - bit.ly/39TMvdu
My Top Electric Bashers (Updated):
Tekno MT410 - bit.ly/2XUWURu
Traxxas E-Revo 2.0 - bit.ly/2twJfVV
Traxxas Hoss - bit.ly/31U4Pkl
Traxxas Rustler 4x4 VXL - bit.ly/3xfBIqB
Arrma Vorteks 3S BLX - bit.ly/2Pdh9d9
Traxxas Slash 4x4 Ulitimate - bit.ly/2Xogh6j
Traxxas Maxx - bit.ly/2R0K0A7
Traxxas XMaxx 8S - bit.ly/2X6Liuu
My Crawler Scale Rigs:
Traxxas TRX4 -
My Race Vehicles:
Tekno ET48.3 (Etruggy) -
Tekno EB48 2.0 (Ebuggy) - bit.ly/2uhtUsI
Tekno SCT410.3 (4wd Short Course Truck) -
Tekno NB48 2.0 (Nitro Buggy) -
Tekno NT48.3 (Nitro Truggy) - bit.ly/38u69gU
Tekno ET410 (10th Scale 4wd Truck) - bit.ly/2yAAHfG
Tekno EB410.2 (10th Scale 4wd Buggy) - bit.ly/2YIiFo6
The cars I race at the moment with complete list of all the hopups and components
bit.ly/3gVNKy7
Other Race Vehicles:
Tekno NB48 2.0 (Nitro Buggy) -
Tekno NT48.3 (Nitro Truggy) - bit.ly/38u69gU
Tekno ET410 (10th Scale 4wd Truck) - bit.ly/2yAAHfG
Tekno EB410.2 (10th Scale 4wd Buggy) - bit.ly/2YIiFo6
My Son’s Race Vehicles:
Tekno SCT410.3 -
Tekno EB48.4 - bit.ly/2GLnkOg
Best All Around Race Tires:
Buggy - bit.ly/2FPjKl6
Truggy - bit.ly/3a8Ln6E
SCT - bit.ly/2tYXh2k
4wd 10th Scale Truck - bit.ly/388NzJT
Favorite Lipo Batteries
Protek Lipos (Race Packs) - bit.ly/2KoMR0P
Traxxas Lipos (Basher Packs) - bit.ly/32cHZV1
Quality Budget Lipos - bit.ly/3hl567B
8th Scale Race Electronics:
Speed Control (all) - bit.ly/3dm7RCM
Must Have ESC Fan -
Motor (eBuggy) -
Motor (eTruggy) - bit.ly/3a8vfBL
Motor (Short Course) - bit.ly/3bdg9es
Recommended Servos:
Protek 170SBL (Best Race) - bit.ly/2yBiuif
Protek 370TBL (Best Crawler) -
Protek 155T (Best Basher) - bit.ly/37N08tN
Protek 130T (Better Basher) - bit.ly/3bVCb6L
Protek 100T (Good Basher) -
Hobbyking 15298B (Super Cheap) - amzn.to/2HJKe8Y
Want RC tech support, giveaways, or help promoting? Check out my Patreon page:
/ marksantamaria
Get MSM Merch Here! msmvlog.com/
Join the “MSM Drivers Meeting” community! bit.ly/35jlZuR
Save money watching my vlog:
www.tonyscoffee.com - My favorite race coffee Tony’s Carmelita 20% off with coupon code “marksantamaria”
rcbodyarmor.com/ - Save 10% with coupon code “MSM10”
www.macscdp.com/ - Save 20% on orders $25 or more “MSM20”
www.racecraft-... - Save 5% using coupon code "MSM5"
Want to send me stuff to review or show off?
Mark Santa Maria
6710 Virginia Pkwy Ste 215 PMB 69
Mckinney TX 75071
Follow me on...
Patreon Page - / marksantamaria
Instagram - @themarksantamaria
Facebook - / themarksantamaria
UA-cam - / marksantamaria
On The Tone Podcast - / onthetonerctt
Music by Joakim Karud / joakimkarud
Music by: @dcuttermusic www.davidcutter...
#rccar #msmvlog #rcvlog - Розваги
hey mark, i’ve been drag racing with rc cars for 3 years or so now, a couple of quick tips for you to get the car a bit quicker: id go down to the 50t spur or smaller if you can find one to fit as well as a bigger pinion. also the car isnt transferring weight and is spinning when you launch so id raise the wheelie bar some and put some softer springs on if you can. lastly id turn the tsm off if you’re comfortable with that, it limits your throttle as well as steering it for you which will slow the car down. with that system the car you wont be hitting sub 2’s on the gnss (which is even faster than that on a timing system) but it should get a good bit quicker! good luck with future projects and keep making great vids sir!
tsm does not limit throttle just steering
GNSS is .2sec slower
Sharing information just shows how generous person you are thank you sir I got those valuable information that i needed to know
@@joserifaie His "information" isn't accurate, and find better places to get info. UA-cam comments ain't it lol
Nah man you want stiff Front shocks
adjust the wheelie bar so its off the ground so it won't steer the car, you just want it to hit on the launch. Keep her straight and shiny side up
Those tiny wheelie bar wheels are catching the grooves in the road making the car squirrely.
I’ll tell you this I have zero experience with rc drag racing but with real cars/trucks prep makes a huge difference!
so cool just drive to the mall parking lot and race at night
Truck looks good, can hear it spinning for the first how ever many feet, then it hooks up, got my thumb steers in the mail they are sweet, love the colors...
awesome build!! look at putting your wheelie bar at an angle to stop twist
Nice to see AWD. Here in AZ we tried putting together a Pro4 AWD class but couldn’t get enough interest. There really only ended up being a handful of us. Same class rules as the 2wd class with the exception of the 3s option. Fastest I was able to run on rubber tires and no prep was 2.1 with most of my consistency at 2.2-2.3. Breaking sub 2’s would be cool to see but short of running foam tires with prep, it would be a tough time to beat. Good video though!
Super dope build either way I wouldn't mind building one for myself...super cool truck!
Enjoy the weekend
What lacks in speed it has in coolness, that thing looks amazing
For Traxxas it’s Traxxness! Cool idea and looks great!
I like the fact you have both a mustang and a tundra like me and you like rc cars too (except you have way more rc cars than me)
Wheelie bar looks like you forgot to tie down a ladder in the bed 😁 kidding aside, looks sick!
Mark, that looks KILLER dude!! Love the stance, she looks mean and looking to kick some ass. I've been checking out your channel from time to time, and you've got some pretty solid videos bruh. Keep on rocking it in Texas my man!!!!👍💯💯☝
Lift the bar for sure
Awesome video I want your merchandise especially those shirts
All for the fun. look great.
2:52 man that looks good
Oh okay good, I'm not the only one that sniffs new tires haha.
The rub marks on the body are for your MSM decals to cover.....sweet ride👍
Great video cool truck nice set up
Some cars removing the front springs or going super stiff on Front Springs help a lot for straight line dragging. Just a tip I learned from other draggers.
Mark, I have a Tekno SCT410 with Slicks all around, that I race with my neighbors, it has an SMC 1900 KV motor with a 4S Battery, It fly's down the street!
Thanks for sharing👍
Slipper clutch is screaming
You might want to put a bigger motor with a lower kv like a 1/8 motor and esc
Very cool build can't wait to see it get dialed in
My rc are all broke down have been for awhile no money to fix them but I can still watch you with yours love your content
That truck is siiiiiiiiiiiiiiiiiick. That is pure style Bro I love it.
Mark this is so awesome... I have a blue 1794 and a slash... you know what's coming next. 🙌 thank you!!!!
Very cool, definitely different!!! I would not thought of a 4x4 truck drag car. Maybe they will make a class for it. Just ordered my Traxxas 4x4 chassis for my next build AND a Jamie Powell shirt!!! I'll post the pictures on the MSM Drivers Meeting when they come in! 🔥🏁🤘
Sweet!!! We appreciate your support!!!!
@@SoulciaLight I appreciate you and Mark! You guys have shown me a world of joy. I feel like a kid again at the races. Every time I work on my truck or watch my son and his drift car, it reminds me of my dad and I. We lost him two years ago, but I feel him every time I enjoy this wonderful hobby. I like spreading the love of it as much as I can. So again, I appreciate you guys and all you do! 🔥🤘
It needs stiffer suspension and the wheelie bar slightly high to let the suspension work. That will help it go straight
She looks sweet! Great setup and design!
Great video I am also making a Traxxas slash 4x4 drag car except I ran a 2.91 at 43 mph with a 13 tooth pinion and 58 spur gear all completely stock I just added some weight I'll be posting a video on that on my channel shortly.
Good evening great video
Looks awesome. Sounds like the slipper can’t handle the torque and traction. Maybe next mod could be the aluminum center diff 👏👍
That’s what I was thinking because I don’t see any tire marks on the ground?
Raise the bar
Truck looks awesome Mark. Love your videos. I think the wheelie bar touching the ground might be steering the truck a little. Kinda like a boat rudder steers a boat. That might be why you're getting the wiggle. Looks amazing though. Nice build buddy👍
I love tundras. i didn't even know proline made a tundra body, I might have to get a slash now!
Great videos! Check your to see if the slipper is loose with 4wd & 4 slicks with suace makes for a bunch of traction. You just might have to lock it up.
Nice truck
Small adjustments on the slipper clutch will get it leaving straight on full throttle
So so cool glad you built it out and tested it
U did a really nice 👍 job in that build & I love the body
Really nice set up
So dope man im gunna get a drag slash now literally tomorrow lol
That's a good looking truck!
Toe the front in 1/4”, should help a ton
Slipper clutch
Mark try using a higher "C" battery. I run ZEEE 5500mah 120c 3s battery on my Slash 4x4. I use a Hobbywing MAX 8 ESC. I also use Foam Tires instead of rubber. I drag race every Sunday night in my RC club in Brunswick Georgia. I am currently running 1.9 at 92mph
I agree c rating makes huge difference to punching power
How do you like the ZEEE battery’s? I’ve seen a lot of bad reviews, but then seem pretty good
@@eastonchristensen3601 I had an issue just recently where my Velineon VXL 3s ESC caught on fire with one of my ZEEE 3s battery's plugged in and the battery still works lol. BTW, Traxxas is awesome!!! They replaced my ESC, ESC fan, and my motor free of charge.
@@leebrown2863 no way! Is that because you bought it from traxxas and you had a warranty? Or they just replaced it because you had a traxxas
@@eastonchristensen3601 I was gifted a VXL system for Christmas. I called them up. Explained what happened. Printed out the mail slip. Then sent it off to them. After that, they took care of me.
Converted a tt-01 to a AWD drag car. Locked the front diff to keep both front tires the same size when spinning and it would go straight.
Also use carpet for burn out you could even use simple green for burnout
That truck is so sweet and them are some nice shirts.😀
Part of the problem may be the rear unloading and spinning from the wheely bar not letting the rear squat. You need to find a happy medium of the rear squatting but the front not lifting and unloading too badly.
I’d raise the wheely bar and maybe let the front travel down more more so it has to raise higher to break contact for the front. Maybe try weight on front also.
You should consider putting the 2400kv and vxl4s on it. It's just right 👌 love the look of this build 😁
This is what I did with my rally.
Lol I thought I was the only one who smelled their new tires lmao
sounds like slipper is still a tad loose. I like the concept thou, truck looks good.
This thing is sick!!! Might turn my Slash to a drag car. Great vlogs bro!!!
I wonder why people like drag 🤷🏽
@@jordanoliveto5863 I take it you've never been to a drag strip.
@@omarboone1220 nope never plan on going
@@omarboone1220 i just don't see what so fun
Hahahaha you smelled your tires hahaha.to funny
I like the look on that rig.. haven't seen anyone do it before!! #Connected
Another reason for the turning Mark might also be that the balance of the vehicle is off center. Is the weight evenly distributed? By the looks of it when the body is off, the answer is a big "NO." that might be another reason it is so squirrely. the weight/balance needs to be the same on both sides or the vehicle is always going to go squirrely.
Great video, bro. Good Luck with all the project cars and upcoming events.
Gonna have to lock the diffs
More power
Pick up the Willie bar and put heavy diff fluids front and back
Locking your diffs might help with going straight.
Great video
I think you might need more toe-in front and rear to help make the truck slightly less “responsive” to steering inputs. I know I’ve chased drivability issues only to discover my alignment was slightly out, not where I thought it was let alone where I wanted it to be. She’s a ripper though!
adjust your wheelie bar up dragging will will steer it left or right
Hey Mark cool video, you could try out the Hot Racing sway bars to help your drag Tundra get more traction. Hot Racing makes sway bars for both the 2WD and 4x4 Slash.
Cool!
Very cool project. Do you have sway bars? I noticed it’s still a little squirrelly on launch. Maybe add preload to the rear shocks where needed.. I know you had the TSM on, but did you try turning it off even for S&G’s? So many factors! Plus you said it was cold where you’re at so that may play a factor even with the sauce. Hopefully we’ll see more videos on this particular car.
Without TSM you have to adjust the the steering expo. So you just have a very small amount of steering. When the car is all over place that's you overcompensating. But i say it's you but really it's the truck making you do it. I know you have other car you can just put it down and they feel planted and you can drive it straight as arrow. You have to set it up so it goes nice and straight.But you still only need very little steering.Just try it..You won't have to fight it to keep it straight.I don't drag race but i raced oval for many years and i would think getting it to go straight without touching the steering wheel and scrubbing speed off. Great suggestions from kobe shutter, Below. BTW Love both tundra's!!!!
You should try putting heavier diff fluid in the rear or even install the hot racing diff locker and maybe lower the front and raise the rear so the truck can squat for more traction
That’s so sick !!! Would you be able to add a trans brake like how the actual drag slash has ?
Whats that?
I did it with mine but its alittle wonky to use. I put a normally closed button on my controller. Only down side is it goes in reverse if the button is hit so i gotta hit it while the wheels are spinning so it cancels it out and it will sit still with any throttle input until i release the button.
Put the stock pinion back in it and try that. Tried to raise you're Willie bars a little bit. Looks good
the reason you're spinning on take off as opposed to just holding the car, when you take off you're getting a load transfer from the front to the rear squatting the back of your car, ultimately reducing traction up front which is probably/most likely where you're take off wheel spin is coming from, you have a decent camera, put it beside the truck and watch in slow mo as you do your launches, I'm sure you'll see the weight transfer and the wheel spin up front.
I wonder if the slipper clutch is starting to spin on it cuz you have so much traction and it's not the tires spinning that would make sense for this soft launch and picking up a lot of speed really fast Midway through the Run
I think I read that alot of guys use tire warmers to help not only get the tire prep ready but to get some heat in the tires before they take a practice run
Great video. Maybe practice it on a 3s bu the time you get used to keep it straight on 3s rhe 2s will feel easy
Few things that I would do. So you definitely want to get the wheelie bar off the ground it could be the reason your all over the place. 1 million diff fluid rear for sure and maybe up front 500k or better. Add some front weight to help keep the front end down and planted, do not use the wheelie bar it's more for flip protection than anything else. Stiffen up the suspension in the rear either more preload or thicker oil. For the front I'd go little lighter on the oil than rear and add preload so when the front comes up it still trys to push it into the ground if that makes sense. Then make sure your weight is even left to right that could cause it to pull to one side or the other. Tuning for 4wd is gonna be difficult but I would absolutely love to see you hit low 2s. Good luck cant wait for future uploads.
It sounds like it was slipping the slipper pretty hard off the line.
18 t pinion.im running a 31t and it moves crazy. Those front tires are balloning to much thats why you have a line in the middle of your tires.great stuff
Awsome video!👊😎
I think if you can spend some time setting up the suspension you’ll go a lot faster :D. Either that or go to a surface that is better prepped for drag racing ;)
Not sure how it’s done in the RC world but it the real drag world they sauce the track :P
🤔🤔
Hey I was going to put m/t I’m my fully built rally but it didn’t seem practical and a week later I see you on the idea please get the rally and do it it’s such a fun car
It's not your tires spinning. It's the slipper clutch!
Your getting up on the bar unloading the suspension no weight transfer
slipper clutch slipping a lot, easy to hear if you know what to listen for... that jump in G's mid run is the clutch finally grabbing, not tire spin. If you lock that clutch down hard you probably could go low 2's
I love that body! Wonder if that would fit my gen 8 chassis... 🤔
Hey to the real mark santa Maria, I just got a spam message on here. Check it out. I reported them.
Change out slipper for a hoss center diff
Mark, it looks bloody amazing. Keep tweeking it and having fun. Love the vids but only just subbed. Get a crappy shell that one is too nice. Or don't crash. Lol
I have been drag racing in Ohio and if you use prep, you need to clean the tires with simple green if prep is a little sticky or non-clorinated brake cleaner if prep is really sticky. Also after every pass you should clean and re prep your tires. But I am excited to see how your car goes.
You need suspension tuning an get the first 50ft where it grips I bet you get low 2s
Hey Ive been tuning and building drag set ups and in your situation I thing it’s best even thought this sounds counter intuitive you need to put wheight on it you can buy rc car wheights or make your own
Beautiful truck, Lemme know if u ever decide to sell it. I’ll buy it asap lol.
I thought I was the only one who cleaned screws out with an xacto knife😂
Proline Reaction belted tires will help you get the power down and won't expand. Heavy grease in the front diff to get more power to rear tires, 40 -60 power its about right, 65-35 it looks now why the front rub.
Let’s race ! 4x4 vs 4x4 Im just 20 minutes east of McKinney
That car looks cool how much faster do you think it is