Great to see you back again Bode… Brilliant content as usual and those side skirts a far better suited than the first lot you moulded over two lengths of timber. Good scoop looks A1 aswell. Keep it coming brother 👍👊
I hope your painting Betty White white again it’s only right it’s fitting legendary shit my boy that old girl is back can’t wait to see what you do next😎💪🏼🎥🏁
Dude I'm so glad Kyle found you I love watching your videos it makes me wish I still had my 88 lxi I will always stop to watch your videos as soon as they come out no matter how far apart they are man keep doing you and keep this awesome build going
🤦🏽♂️ I didn't even know you uploaded this video. I'm diggin the hood scoop and definitely the side skirts all you need is to customize a lip for the front and rear bumper and what I really love about this project is first in the world 🌎 😌 👌🏽 glad to see you back Adam #bodesqaud #projectbettywhite #milestoneto100k
Glad to see you back at it man. I love this build. It was one of the biggest reasons I started watching your channel. I can not wait to see it finished.
Great! Job love watching your videos believe it or not you do inspire people to get out and do stuff and I have learned from you and your channel. Keep up the awesome work love it !
Would love to see this build at SEMA this year!!! Talking about unique swap built from the ground up! Take as much time as you need with your videos because the intro is always 🔥🔥🔥
And a couple years later I see things I wondered about and I absorb... I have been wanting a scoop for my 92 ranger and the scoop on a 79-84ish mustang and other fords of that era is nice but hard to find so I have looked at many other factory scoops and the Tundra wasnt even on my radar so I may look at that one under a magnifying glass to see if its measurements work or could work with some modification and then those side skirts I never knew how you came about them as I didnt discover your channel that far back. Now I think I will be going back and watching all the previous vids I didnt see until you were in your "new shop" as that was when I started to watch..I am glad to see the Hondamino paint scheme which means you didnt get leveled by Milton.. I really was fixated on that storm with my daughter being in the path very close to Tampa and after seeing what Helene caused for WNC, Tn, Ga and SC. I`ll be watching and waiting to see whats next. Keep up the great work and content.
Another awesome video! I love the way you go back and redo the things that didn't meet your expectations instead of throwing in the towel. Scoop and sideskirts both look great.
Dude glad to see your back on the Honda. and thank you for the all the knowledge and inspiration. Thanks to you showing all of us that anything is possible, I will be able to create my own kit that I have been piecing together for a years now for my 1984 Dodge Rampage. The 80s urethane has seen better days. But I still have questions and I'm hoping you will be able to answer them in the coming videos. I will be recording my progress as well and maybe one day be able to have the time to upload. But till then dude keep up the amazing work and videos, and Thank You!
Good to see you back! But I think a lot of us would like to see the content of you actually making the bits. I know I would I enjoyed the regular uploads
Probably going to steal that idea for that scoop. My foxbody is getting a 5.8 from a econoline van. This engine is a bit bigger than the stock hood. I hate the look of a cowl good, rather go with a scoop. Which looks meaner and cooler! Very good vid. Thank you.
Lht in Florida is looking for someone to paint a honda hatch n work out a deal. They do youtube. Reach out. I commented about your channel helping other youtubers in the past and lht owner John responded and said he is down to work something out. Do what u want I did my part being a nosey viewer xD 🤙
Looking good Bode, great to see another upload from you as I've been wondering how things were going but I can see that you have made good progress on the build, looking forward to the next instalment 👌🙏👍 John UK.
Amazing to see you back Adam, I've started posting in my own little slice of Honda heaven. Would love to come to the states and drive a 3G soon. THE. PROGRESS. IS. UNREAL! I hope you're representing everyday at work and keeping alright in the world. I hope that you're happy and comfortable with presenting it at Tail of the dragon this or next year 😉 but would be pleased seeing it in your garage.
Its coming together and looking pretty dam good. I like how creative you got with it and the ideas you came up with to make it work. In my honest opinion, from the front it looks like an old Subaru but from the rear you can see the Honda in it. I like it a lot and think it is definitely a one of a kind car.💯 💪👊
hey genuine question? do u have to make the fiber glass looking fender first and do alot of steps, or can u just litterually cut metal to a widebody look and bolt it on why has no one done that?? cause if its not bad to just make a metal widebody and wrap it ima just do that then.
I know it looks a bit rough in this state but all of your mods are very modest, elegant touches. I think the cars gonna look great when everything’s done and it gets a fresh coat a paint.
What up boddy I have been following you on this project far to India swap father as the body work on the what 86 Honda Accord or 88 Honda Accord but for your FYI . I used to own a 4 door 86 Honda Accord back in the 90s I had a body kit on my car one in the name of the body kit was called Xeocon body kit and another one Kmarnirae body kit that one was made out of fiberglass. The one I had was made out of polyurethane some type of rubber but made for a four-door and a Honda coupe also so I'll give you this information if you didn't know what we back in the day had to go through because you making some side skirts that you might not have to do or maybe probably be able to order but I appreciate the creativity
I think with those agressive side skirts it needs a chin spoiler. I also think the idea of sectioning the skirts is a good one and that the scoop is a clean looking solution.
Gonna be a true 1 of 1 build. Can’t wait to see the finished product.
Nothing wrong with longer, higher quality videos too! As long as you keep on doing what you are passionate about and showing us.
Coming along nicely, can't wait to see it all finished and painted!
You have a once in a lifetime chance you have 70 plus k subs keep it up man.
I LOVE how that beast is progressing! & as far as a lot of time between videos: whatever you post...I'll watch.
Great to see you back again Bode… Brilliant content as usual and those side skirts a far better suited than the first lot you moulded over two lengths of timber. Good scoop looks A1 aswell. Keep it coming brother 👍👊
Can't wait to see more of this accord! Great job!
That scoop is perfect!
Ingenuity right there. Thanks for the update,Adam!
I hope your painting Betty White white again it’s only right it’s fitting legendary shit my boy that old girl is back can’t wait to see what you do next😎💪🏼🎥🏁
Its my birthday tomorrow so this is definitely an early gift. Thanks brother!
86 is coming along sweet, can't wait to see it in paint.
Man that gives me some confidence to try and do something like this to my car. Love the content no matter how long it takes
do you know where to find these materials he and everyone else is using? what do i search up? fiberglass tape or smt
Glad to see Your doing good Adam! Betty is always evolving.
Always good to have you back those side skirts for great ! Can definitely see where it’s going from there
Hell yeah!!! Been waiting for an upload! 😎 Can’t wait to see her all painted and polished up!
Dude the sideskirt idea was genius
Bode vision is a genius. Man that looks so good with the hood, still looks oem and factory. Good job 👏 sheesh I’m amazed
Yesterday i thought where Bode dissapeared and here you are. Like your content as alweys.
My brother from another mother soo happy to see you
Dude I'm so glad Kyle found you I love watching your videos it makes me wish I still had my 88 lxi I will always stop to watch your videos as soon as they come out no matter how far apart they are man keep doing you and keep this awesome build going
Man I love the way you film, you understand what viewers like! Love your style, new follower here!
Bro this car is coming out so freaking sick!!! I can see the final vision now! Ur so good at what u do!
this is honestly the dopest build i have ever seen, a ls honda, jeeeeezus, i bet this rips so hard
It's great to see another awesome video from you Adam.
Need front lip to match now n the accord looking sick
Im pumped!! Been watching this build for a long time gonna be sweeeeet when its finally done!
Glad to see you back. Keep the good content coming!!
Happy to see you back bro.....☺️
What a great stance....😍 it looks killer!
Great to see you back uploading. Love the progress on this build
This ol girl is going to bad ass one of a kind !! I actually love how it’s turning out
Every time I see a video pop up of bodevision I get so excited lol, I love the content. Your work is A1 👌
Those side skirts are so sick!! i it’s amazing the stuff you come up with. love this idea.
🤦🏽♂️ I didn't even know you uploaded this video. I'm diggin the hood scoop and definitely the side skirts all you need is to customize a lip for the front and rear bumper and what I really love about this project is first in the world 🌎 😌 👌🏽 glad to see you back Adam #bodesqaud #projectbettywhite #milestoneto100k
I’m more pumped about this build than I am my own build. I love it!
Easily the best looking Accord I've ever seen.
Glad to see you back at it man. I love this build. It was one of the biggest reasons I started watching your channel. I can not wait to see it finished.
Love the side skirts! Good to see you back!
Welcome back!!! Make sure u fasten the lil pigtail. You may pinch em when going up n down. If u re hook up the little motors for the lights.
This car is sick. You have done a ton of work.
This thing is coming out awesome I love it. Can't wait to see it painted .
Bro…so long as you post!!! Life isn’t easy. I’m just glad you seem to be doing good. My prayers go to you and your family! 🙏🏽
Great! Job love watching your videos believe it or not you do inspire people to get out and do stuff and I have learned from you and your channel. Keep up the awesome work love it !
Would love to see this build at SEMA this year!!! Talking about unique swap built from the ground up! Take as much time as you need with your videos because the intro is always 🔥🔥🔥
Mad build, side skirts look the part as does the bonnet scoop. keep up the great work. See you in the next one. Cheers
Great work. I wish you were building cars full time man. Id pay to watch your videos.
So happy your alive and doing good.
Progress is progress. Nice to see you back.
And a couple years later I see things I wondered about and I absorb... I have been wanting a scoop for my 92 ranger and the scoop on a 79-84ish mustang and other fords of that era is nice but hard to find so I have looked at many other factory scoops and the Tundra wasnt even on my radar so I may look at that one under a magnifying glass to see if its measurements work or could work with some modification and then those side skirts I never knew how you came about them as I didnt discover your channel that far back. Now I think I will be going back and watching all the previous vids I didnt see until you were in your "new shop" as that was when I started to watch..I am glad to see the Hondamino paint scheme which means you didnt get leveled by Milton.. I really was fixated on that storm with my daughter being in the path very close to Tampa and after seeing what Helene caused for WNC, Tn, Ga and SC. I`ll be watching and waiting to see whats next. Keep up the great work and content.
Always great to see your work! I can’t wait to see that thing in one color!
I said it before... But after every video I watch... I LOVE THAT MUCH MORE
Great idea on bringing up the skirt, im sure it will look nice, keep up the good work💯
Another awesome video! I love the way you go back and redo the things that didn't meet your expectations instead of throwing in the towel. Scoop and sideskirts both look great.
Dude glad to see your back on the Honda. and thank you for the all the knowledge and inspiration. Thanks to you showing all of us that anything is possible, I will be able to create my own kit that I have been piecing together for a years now for my 1984 Dodge Rampage. The 80s urethane has seen better days. But I still have questions and I'm hoping you will be able to answer them in the coming videos. I will be recording my progress as well and maybe one day be able to have the time to upload. But till then dude keep up the amazing work and videos, and Thank You!
Good to see you back! But I think a lot of us would like to see the content of you actually making the bits. I know I would I enjoyed the regular uploads
Whatever you give us, I appreciate it!!!!
Bro the side skirts look stupidly good🖤
Probably going to steal that idea for that scoop.
My foxbody is getting a 5.8 from a econoline van. This engine is a bit bigger than the stock hood. I hate the look of a cowl good, rather go with a scoop. Which looks meaner and cooler!
Very good vid. Thank you.
Car is coming together nicely !
I saw your update and was like " Holy Shnikeys!" Where the hell you been Bode? Good to see an update from ya partner! 💪😎
Awesomeness that you did it to an accord. I have an 89 lxi that im working on doing this to.
Always glad to see you back brother!
I'm hyped on this build brotha. I've been wanting to see this
Can’t wait to see this build completed
Nice starting point for your building block
Looks great but definitely need to section them some. Keep up the great work!
Dieing to see this finished and painted!!! Great idea on extending the skirts 😎
Great job Adam! I love it! Dutch regards, Nico.
Lht in Florida is looking for someone to paint a honda hatch n work out a deal. They do youtube. Reach out. I commented about your channel helping other youtubers in the past and lht owner John responded and said he is down to work something out. Do what u want I did my part being a nosey viewer xD 🤙
The scoop looks great on there
Looking good Bode, great to see another upload from you as I've been wondering how things were going but I can see that you have made good progress on the build, looking forward to the next instalment 👌🙏👍 John UK.
The idea was great, execution clean.
Amazing to see you back Adam, I've started posting in my own little slice of Honda heaven. Would love to come to the states and drive a 3G soon.
THE. PROGRESS. IS. UNREAL!
I hope you're representing everyday at work and keeping alright in the world.
I hope that you're happy and comfortable with presenting it at Tail of the dragon this or next year 😉 but would be pleased seeing it in your garage.
Excellent idea, I love the content as usual.
Great content man, glad to see you're back.
looks sick my guy keep up the good work cant wait to see it all in one color 🤟
Good to see you back 👍
I have a Mazda 929 and you are inspiring me to make a kit.
Always a good time to watch your videos. That how would go about doing the body kit
Man brotha nice use of some used sides. Have a 87 fc myself flared like the accord . Always look forward to seeing a vid from you 👊🏼🍻
Nice man this car is a work of art. Keep the scoop also
Always great to see a Bode notification
Awesome to see you and your project hope you finish it soon
Great tip on how to extend body parts
keep it llllllooooow
love the build nice to have you back
can't wait to see this thing painted!
Been here since the start of this channel
Its coming together and looking pretty dam good. I like how creative you got with it and the ideas you came up with to make it work. In my honest opinion, from the front it looks like an old Subaru but from the rear you can see the Honda in it. I like it a lot and think it is definitely a one of a kind car.💯
💪👊
Damn I’ve missed theses sweet ass intro’s man.
hey genuine question? do u have to make the fiber glass looking fender first and do alot of steps, or can u just litterually cut metal to a widebody look and bolt it on why has no one done that?? cause if its not bad to just make a metal widebody and wrap it ima just do that then.
That side skirt work was 🔥🔥🔥
Glad to see another great video brother
Scoop looks dope AF
Grateful to see your vids, they're so well done and you do great work. The amount of work you've put into this channel is epic.
I like the scoop. Kinda like your very first idea but with the hole
I know it looks a bit rough in this state but all of your mods are very modest, elegant touches. I think the cars gonna look great when everything’s done and it gets a fresh coat a paint.
This is looking sick AF. Been missing some bodevision
What up boddy I have been following you on this project far to India swap father as the body work on the what 86 Honda Accord or 88 Honda Accord but for your FYI . I used to own a 4 door 86 Honda Accord back in the 90s I had a body kit on my car one in the name of the body kit was called Xeocon body kit and another one Kmarnirae body kit that one was made out of fiberglass. The one I had was made out of polyurethane some type of rubber but made for a four-door and a Honda coupe also so I'll give you this information if you didn't know what we back in the day had to go through because you making some side skirts that you might not have to do or maybe probably be able to order but I appreciate the creativity
I think with those agressive side skirts it needs a chin spoiler. I also think the idea of sectioning the skirts is a good one and that the scoop is a clean looking solution.
Fucking love your content, it might be few and far between but I'm super pumped every time I see an upload!