Woodworking with very few clamps (maybe only 5).

Поділитися
Вставка
  • Опубліковано 30 жов 2024

КОМЕНТАРІ • 1,1 тис.

  • @SteveRamsey
    @SteveRamsey 3 роки тому +761

    Hey Rex, thanks for the shout-out. Your comments about downsizing rang true with me. I used to be so impressed by large shops filled with tools, imaging all I could do with them. But now my shop has half the stuff it did a decade ago and I marvel at people who do more with less.

    • @thomashverring9484
      @thomashverring9484 3 роки тому +19

      But you have twice the cats you did! Bubbles & Cobra *theme music playing*

    • @KerryHallPhD
      @KerryHallPhD 3 роки тому +35

      I subscribed to Rex because you mentioned his video dissecting an old table. I enjoy both of your channels because you keep things realistically small and practical.

    • @RexKrueger
      @RexKrueger  3 роки тому +94

      Steve: I've been following you for years and your new striped down shop with its clean and bright look is an inspiration! It's obvious that you've put a lot of thought into every part. Amazing where experience leads you. Thanks for your awesome videos!

    • @davidtripp4221
      @davidtripp4221 3 роки тому +51

      I've often thought of the two of you as opposite sides of the same coin. Steve is more power tool oriented and Rex hand tool oriented, but you are both trying to help ordinary people without massive budgets do better woodworking. Its right their in your titles: "Woodworking for Mere Mortals" and "Woodwork for Humans" :) Thanks and keep up the good work, both your you.

    • @thomashverring9484
      @thomashverring9484 3 роки тому +9

      @@davidtripp4221 Exactly!

  • @James_T_Kirk_1701
    @James_T_Kirk_1701 3 роки тому +21

    Rex you sentiment reminds me of something my pops told me when I was younger and I used to talk about all the guns I wanted to buy when I got older. He told me “a wise man once said beware the man with only one rifle because he probably knows how to use it”. The end of your video made me think of that.

  • @golyagolya
    @golyagolya 3 роки тому +14

    A mostly overlooked cheap alternative to bigger clamps (especially when glueing together boards) is the ratchet tie down strap. It has incredible power that can be easily directed with some well-placed pieces of wood.

    • @michaelkulman7095
      @michaelkulman7095 Рік тому +1

      Good point!
      Ratchet straps are a versatile option.
      It's possible to make simple wedge clamps without screwing them to your bench top with lumber preferably drilled with multiple holes and a loop of rope with a twisting stick is possible, a Spanish windlass and so on, so there are some simple improvisations he doesn't show that aren't as involved as using threads you make or buy.
      Another example is an F style clamp that uses a cam rather than threads.
      This brings up that a cam can often be used in place of a wedge or opposing wedges or threads.
      Many have used both for clamps with lumber, possibly drilled with holes for adjustment or in dog holes in their bench for big glue ups.
      I feel he is too thread oriented in his dismissal of self made clamps and holding up a C clamp with threads made of wood doesn't represent what's been done or can be done very well. There is a lot out there on self made clamping and clamps that doesn't involve threads, bought or made.

  • @innov8tive1
    @innov8tive1 3 роки тому +2

    I think you described my situation perfectly when you discussed power tools. I have been preparing to prepare to do some fine woodworking for YEARS now. All I seem to do is buy, set up, improve, adjust, repair, refine, modify and otherwise tinker with my power tools, with no time left for actually using them to their full potential. My shop, although it is a fair size, never seems to be big enough. I think it's time for me to take a long and careful look at what I really NEED as opposed to what I think I want! Thank you Rex, I'm really enjoying your videos.

    • @RexKrueger
      @RexKrueger  3 роки тому +2

      Lots of people are "preparing to prepare." I want to help with that.

  • @jakob411
    @jakob411 Рік тому +8

    I'm just getting into the thought of doing woodworking and I'm really enjoying your videos. I like how you keep it real, no fluff, and keep it to the point. Happy I found your channel, Rex.

  • @GrantHendrick
    @GrantHendrick 6 днів тому

    Thank you Rex for all the great tips. I especially appreciate the how to properly use the adjustable wood clamp.

  • @hali22996
    @hali22996 3 роки тому +12

    Yayyyyy Steve Ramseyyyyyy. Steve is my first woodworking love. His humor and fun and open minded approach to woodworking is still the best 😍

    • @mightress
      @mightress 3 роки тому +1

      Calm down, relax, get a gripper. :p

    • @Motocicleiros
      @Motocicleiros 29 днів тому

      Awnnnnnnnnnnnnnnnn... be careful...

  • @arom8438
    @arom8438 2 роки тому

    Just found your page, found Steve Ramsey about a year ago and both of you have a great attitude… keep up the great work!

  • @tony.kmullinsstudio818
    @tony.kmullinsstudio818 3 роки тому +3

    I've found the "need less, do more" to be true in almost everything I do. My photography started off with me purchasing anything I could get my hands on. I ended up with 7 studio lights, a bunch of stands, light modifiers, and backgrounds, as well as just about every software for editing photos one could buy. Now, I use 4 lights at most (and usually just 1 light on almost everything I do, and that's usually a speedlight), three modifiers exclusively (1 huge silver umbrella, a 34" foldable beauty dish, and strip boxes), one background (18% gray, which is easy to replace with any other background I want), and one editing program (Affinity Photo). Drawing and painting is the same. I even started making my own charcoal for drawing. The one thing I'd recommend for artists to either buy or build is a very good desk ( I use a Mayline Ranger 60" desk). Having a proper surface is so nice to work on. My painting, I only need about 7 colors, including white and black. Everything else can be mixed. The brushes, maybe 10 different brushes. Keeping things simple allows me to focus on the creation I'm trying to make and less on the equipment.
    Just found your channel today. I enjoyed the video. Keep up the good work. Subbed.

  • @royharkins7066
    @royharkins7066 3 роки тому

    Inspirational thanks mate, it’s just taken me about 2 mnths to make a birch ply vice using old car front shock absorbers , what the guy built in ten mins took me 1000times longer !! 2mnths in fact , ffs ! My point .....your videos are so so bones so succinct “ I’m their” man thanks again
    Roy 😊

  • @jkmcdonnell1
    @jkmcdonnell1 3 роки тому +41

    sometimes its funny how downsizing makes things so much easier . my first acoustic guitar took around 150 hrs. now after 47 guitars I am down to 450 to 500 hrs.

    • @luxmoto7344
      @luxmoto7344 3 роки тому +3

      hahaha, that's funny. I kind of regonize that. I think it depends on what kind of person you are; The older I get the more a japanese person I become. ( I'm dutch but I love the urge for perfection the japanese seem to have.). Perfection takes time. I make ships and furniture, but it doesn't matter what you make, You want to make something good, functional, and beautiful.

  • @mnFlatLander
    @mnFlatLander 3 роки тому

    Rex I'm so happy that you got a better mic! Your sound quality is thru the ceiling better. Most of the echo of your very live shop is gone. Also your video was excellent.

  • @tugboatsvideoemporium6476
    @tugboatsvideoemporium6476 3 роки тому +104

    Bro, you can pry my clamps from my cold dead hands. IM NEVER GIVING UP MY CLAMPS

    • @grumblycurmudgeon
      @grumblycurmudgeon 3 роки тому +18

      "Really, you'd have to unscrew them from my cold dead hands... except in the case of the spring clamps. Those you'll have to pry."

    • @rildain76
      @rildain76 3 роки тому +4

      Lol

    • @henmich
      @henmich 3 роки тому +2

      ua-cam.com/video/T9BdI-jB8xc/v-deo.html

    • @bluephreakr
      @bluephreakr 3 роки тому

      @@henmich Nice reference. For people browsing this in future, _no_ this isn't some prayer video or spambot posting.

    • @RaineWilder
      @RaineWilder 3 роки тому

      @@henmich That's exactly who I thought of when I read the above comment

  • @scottsimpey2965
    @scottsimpey2965 3 роки тому

    Great video Rex. I know that the clamps that you showed are the more traditional clamps but the ones that I find myself reaching for most often in my shop if I need a one is one of those quick grip trigger type clamps.

  • @sleazy1drache
    @sleazy1drache 3 роки тому +4

    Rex
    I recalled my grandfather used rope or twine to make a tourniquet to squeeze chair legs, instead of using clamps.

  • @ejd53
    @ejd53 3 роки тому

    This was very gratifying to read. I have never used many clamps because my grandfather never used them. He served a seven year apprenticeship in the Napier and Miller shipyard in Glasgow, Scotland and later was a joiner in a yacht building company. He made everything using "old-style" joints and hide glue and taught me the "right" way to do things.

  • @wasweiich9991
    @wasweiich9991 3 роки тому +13

    Fun fact: Timber framed houses here in germany use the very same technique of offset holes - at least back then, when they used hand tools. Today they usualyl don't cut them by hand so they usually fit together so well that they don't need it.

  • @dwaynebriggs7101
    @dwaynebriggs7101 6 місяців тому

    Hey Rex I’m just getting in to woodworking accumulating my tools and stuff this video was very informational. Going down the rabbit hole UA-cam can be overwhelming I just happened to stumble upon your video the information you’re sharing and the flag of Trinidad and Tobago 🇹🇹 in your background made me subscribe.

    • @dwaynebriggs7101
      @dwaynebriggs7101 6 місяців тому

      Being from Trinidad spend money on some tools is a lot harder where shipping and handling is concerned so seeing ways to do the same stuff by just being a little more innovative helps a lot

  • @mm9773
    @mm9773 3 роки тому +10

    I have enough clamps to clamp up most things I want to build, but that’s usually not the problem: most people aren’t missing the clamps required for their project, most people run out of clamps when they’re glueing up several pieces at the same time. And that’s not just a problem for commercial shops, it also applies to hobbyists who don’t have an endless supply of spare time.

  • @mohammadmursalin6817
    @mohammadmursalin6817 3 роки тому

    @ 3:57 you answered a 15 year old question I had. I saw furniture back in south Asia that had these mortise and tenon joints but always had these dowels. I never understood why. But I remember that wood workers there used to rarely use glue because quality was poor and supplies were not adequate. I never saw Why they drove in those dowels or that they made those slightly misaligned holes; however, now it just clicked. As far as traditional wood working techniques go, I think no one on youtube is more researched and more practical than you.

  • @robingronw6491
    @robingronw6491 3 роки тому +31

    The draw bored mortice and tennon is such a good joint! A ratcheting strap is great for the really long stuff with shims to protect the work piece. Thanks Rex.

    • @paulm.8660
      @paulm.8660 3 роки тому

      I too use a ratchet strap and also a set of tourniquet cauls for larger pieces. It's not ideal, but it's a dirt-cheap solution for when I just really need to fix a chair or table

    • @ironheadrondo5596
      @ironheadrondo5596 2 роки тому

      Yup bike lifts, tow straps, clamps, winches, oh and I think they may also help in attaching cargo to vehicle attachments. Truly awesome little gadgets

  • @sonke5485
    @sonke5485 3 роки тому

    Hey Rex
    I am a Cabinet maker from Germany and just stumbled on this video of yours.
    At my workplace, where i don't have to pay for the tools i obviously enjoy to have a lot of clamps, but for my own small space at home i dont wont to pay this much. So thanks for the good advice.

  • @W4ldgeist
    @W4ldgeist 3 роки тому +176

    An important part of why in the past people didn't use as much clamps is the glue itself. Bone/hide glue "tightens" up while it dries. Additionally it dries super quickly to a state where no pressing is needed anymore and it needs only a couple of hours to really harden up for real use. Glueing up boards in the past was done vertically and the weight of a board was enough pressure for a hide glue up.

    • @windhelmguard5295
      @windhelmguard5295 3 роки тому +85

      my father used to restore antique furniture quite often and the dovetails in those usually didn't even have any glue in them, so many of his jobs revolved around pieces that came apart when the owners brought them into modern heated rooms, the pieces got too dry, causing the joints to loosen.
      my father explained to me that, what they did, was to have the pieces way drier than normal during assembly, this causes the wood to contract, once dried, they'd put the pieces together and then let the wood absorb moisture from the air, this causes the wood to expand, creating an extremely tight friction fit.
      as for mortise and tenon joints, the trick is to only dry the tenon piece, hammer it into the mortise and then the same thing happens, the tenon absorbs moisture from the mortise, expands inside and causes a friction fit.

    • @purplehelm8853
      @purplehelm8853 3 роки тому +11

      That's a very good point! Hide glue was the clamp itself. Never thought about that. I still use hide glue for my canvases and canvas panels while painting because of its archival properties and that's a characteristic of its behavior.

    • @troyclayton
      @troyclayton 3 роки тому +2

      Does fish glue do this, as well? I just can't bring myself to get a gluepot and baby my glue, and my shop is very cold in the winter which would make for a very short open time. So, I use fish glue on stuff I want to be able to be taken apart if needed someday (stringed instruments). I like the long open time and high tack.

    • @georgenewlands9760
      @georgenewlands9760 3 роки тому +3

      Panels would also be assembled using rubbed joints...put hot hide glue on the jointed edges and rub the edges together until the glue “grabs”. The panel can then be set aside (on edge) until fully set. It does also work with modern glues, though I haven’t done it myself.

    • @michaelballinger6419
      @michaelballinger6419 3 роки тому +1

      @@georgenewlands9760 I often rub joint with pva and it's great if you are clamping as well because it prevents the timber sliding when you tighten the clamps

  • @TaylerMade
    @TaylerMade 2 роки тому

    glad i watched this video. as a retired custom furniture maker i worked from a 1 1/2 car long single garage. i was able to make some very large pieces in there with a bit of a squeeze. the reason was i have very few tools. most of the amateurs i see here on you tube have more gear than i do. my thought was every dollar you put into tools collecting dust on shelves, was a dollar you took off the table. and i really don't have a lot of clamps. all my edge joints over two foot are sprung. was trained to work that way.

  • @paulhoulihan9670
    @paulhoulihan9670 3 роки тому +26

    Rex - hope you are ok after your panic attack !! Paper bag scene - my favorite Rex comedy moment of all time !!!

    • @k3ith29
      @k3ith29 3 роки тому +2

      I've had panic attacks.. I Remer one time I was taking seats out of a vehicle. I was also going through a divorce... I stood up from the car and suddenly...my heart started racing and pounding out of my chest. It took a good 25 mins to calm me down. I thought I was dying. These were in my younger years. Had atleast 2 similar situations. Very scary, very uncomfortable.

    • @mrstijntje
      @mrstijntje 3 роки тому +2

      @@k3ith29 that's terrible, actual panic attacks are the worst. I've been on the supportive end of one and can kind of imagine what it's like.
      I hope you could still appreciate the video intro for its comedic value.

    • @tomsenft7434
      @tomsenft7434 3 роки тому +1

      I worry "sprung joints" may year themselves apart over some years, by will of the wood.

    • @nurgle11
      @nurgle11 3 роки тому

      @@tomsenft7434 Actually less likely to have the boards come apart at the ends - have a read of this ... www.finewoodworking.com/2010/04/26/spring-joints-an-edge-glue-ups-best-friend Edit: I think spring joints are far easier to do by hand with a plane than with machines.

    • @paulhoulihan9670
      @paulhoulihan9670 3 роки тому +1

      @@k3ith29 thanks for sharing. The real thing must be pretty scary.

  • @christianbookter3589
    @christianbookter3589 3 роки тому +1

    Excellent video Rex! With a crew I restored an old timber frame tobacco barn owned by one of the signers of Constitution. Almost all joints were draw bored mortise and tenon. , I didn't know what the joints were called until now. There were also scarf joints in the rafter plates, these were held together with two wedge shaped pieces of wood driven one on each side of the timber. The pegs we used on the mortices were called treenails. I don't know what the wedges were called. We had no power equipment on the job site. I still have the barn drill, hewing axe and hatchet left over from the restoration. Thanks for the video.
    rex

  • @terrmaso
    @terrmaso 3 роки тому +4

    Love it👍 I have always appreciated the older craftsman who could do things with minimal tools. I believe we have gotten away from the basics and need to look closer at older techniques.

  • @motivatedbuilder7227
    @motivatedbuilder7227 3 роки тому

    I did that process of tapping the wedges against the wall and other side additional woods to make a panel for table top joining three boards. Its because i couldn't afford a clamp during my free lancing. I believe the lack of resources and the need of together with the desire to work brings forth innovation when we understand the science of working there can be numerous ways to make a work done ! Thankyou for the video😊😊🙏

  • @thejoestays
    @thejoestays 3 роки тому +26

    I was born and raised on Long Island and this is the first I'm ever hearing of the Dominys. Guess I've got some research to do...

    • @RexKrueger
      @RexKrueger  3 роки тому +25

      I grew up in CT and I didn't know that Stanley was based about 50 miles from my childhood home until I was in California. The world is weird.

    • @Nurk0m0rath
      @Nurk0m0rath 3 роки тому +13

      @@RexKrueger Reminds me of a story my dad used to tell. A man drove up to the ticket booth for the grand canyon and started talking to the man in the booth. The man at the booth was local to the area, but he had never bothered to go see the canyon, while the man in the car was making his fifth trip. The man in the car said he was from New York City, but he had never seen the statue of liberty, while the man in the booth had been there six times.

    • @red58impala
      @red58impala 3 роки тому +2

      @@RexKrueger I've lived in the same house for past 27 years. This area is now home for me. I just recently learned there used to be a hand saw manufacturer in this same county but I had never heard about them. They were in business, and subsequently out of business, before I was born. It's amazing the history that is out there that is forgotten or rarely talked about.

    • @GergC0521
      @GergC0521 3 роки тому

      Nor have I but I grew up in Nassau County Long Island nearer the city, East Hampton was "way out on the island" with the 85 mile drive being a 2-3 hour drive. Guess I have research to do too!

    • @roberteckhardt529
      @roberteckhardt529 3 роки тому

      I too grew up in Nassau County and hadn't heard of the Dominys.
      One funny thing about us Long Islanders is we say we live on Long Island rather than in. Though you added rural to the beginning so I do think it sounded better using in.
      Loved the hyperventilating into the bag bit. Great job Rex.

  • @WaterN2WineCreations
    @WaterN2WineCreations Рік тому

    I grew up in my dad’s cabinet shop… he was a craftsman for sure. Once a man was wanting him to build something for him and dad wasn’t jumping on the job… the man made the mistake of walking in dad’s shop and making the comment… “well! Anyone could build the stuff you do if they had the tools you do.” Dad politely told him where he could go and purchase the tools. Your comment about knowing how to use the tools reminded me of that.

  • @TekedixXx
    @TekedixXx 3 роки тому +7

    Alright Rex, that opener was probably the funniest one yet. And the follow up after the intro was a great touch.

  • @ok-tchau
    @ok-tchau Рік тому

    I work with pro audio and reached the same conclusion for my studio. Few versatile high quality handpicketed tools that I know inside out. And inspiration from professionals from the past that did amazing work with fewer tools.

  • @thomaszaccone3960
    @thomaszaccone3960 3 роки тому +120

    Rex, five clamp manufacturers just voted this down. 🙂🙂

  • @singhA1968
    @singhA1968 3 роки тому

    hi
    its good you bringing back historical Tools and teleology for future generations

  • @2AChef-n-BBQ
    @2AChef-n-BBQ 3 роки тому +3

    Nail boards for edge joining, rope and stick clamping were also traditional types of clamping before mass produced clamps

    • @leehaelters6182
      @leehaelters6182 3 роки тому +1

      Can you describe the rope and stick? Do you mean twisting the rope like a tourniquet? I know of another method using string, a batten or caul for straightness, and a wedge to tighten. Used by luthiers for thin stock. Works great.

    • @2AChef-n-BBQ
      @2AChef-n-BBQ 3 роки тому +1

      @@leehaelters6182 exactly like a tourniquet, but you can wrap the rope a couple times to get wider clamping pressure then the stick is tid off in place to hold the pressure

  • @SteveBakerIsHere
    @SteveBakerIsHere 3 роки тому +1

    I just love it when an expert describes exactly what I've kinda ended up with myself! I have two pipe clamps - which started out with very long pipes - at some point, I couldn't fit them where I needed them - so I cut the pipes and ended up with two medium and two short pipes - then I needed long ones again, so I bought more pipes. Now I have two clamps and a bunch of pipes of various lengths. I do have six bar clamps - two of each in three sizes. But I literally never use the middle sized ones - so those *could* go. My large collection of G-clamps are VERY rarely used. And those sprung scissor things - I do need and use in large numbers when doing something like gluing thin plywood to a frame or something like that - I could nail them - but that might spoil a finish or result in a lot of filling of nail holes. But yeah - I could definitely downsize my clamps. But this weekend I'm tossing out my pegboard wall and going with french cleats - so I'll have a TON more space - and quite honestly, I'll probably hang on to those G-clamps "just in case"!

  • @robertlangley6026
    @robertlangley6026 3 роки тому +9

    Rex thanks so much for this video. I literally have the amount of clamps you described and am feeling better about it.

    • @RexKrueger
      @RexKrueger  3 роки тому +4

      You really might be all set!

  • @Exnihil1
    @Exnihil1 3 роки тому +1

    Great talk. Same in my kitchen, over time I’ve let all the fancy, specialist gadgets go. I do 95% of everything with one good fry pan, two SS pots, two knives. All the power mixers etc went, the only one I’ve kept is a hand held stick whisk. As the gadget inventory went down, my cooking skills went up. The electric knife sharpener got dumped in favour of the stones I already had in the workshop for chisels. The special slicers got replaced with better knife skills. Most times you don’t need another gadget, just another skill.

  • @suburiboy
    @suburiboy 3 роки тому +5

    I enjoy the videos talking about traditional techniques. It can be hard to sift through the books to find the useful stuff for a beginner, but it really does seem like traditional forms and techniques are the way to go for people using hand tools primarily.

  • @johnspathonis1078
    @johnspathonis1078 3 роки тому +2

    Hi Rex My grandfather was a cabinet maker. One of his products was a clock which was made from timber veneers. The veneers had to be pulled tightly against the curved jig until the glue dried. He did not use metal or timber clamps. Instead he got the inner tube from a car tyre and cut large "elastic bands" about 25 to 30mm wide. One band on each side of the jig pulling a small timber cross piece onto the work. One car tube made many bands. He also made all his woodworking machinery from timber - 8 and 6 feet belt sanders, spindle (similar to an inverted router), band saw etc. Also we call the metal clamps G clamps not F clamps. Cheers

    • @leehaelters6182
      @leehaelters6182 3 роки тому

      Love that application of inner tube elastic! Thanks!

    • @yrralyou
      @yrralyou 3 роки тому

      So he made his clamps. He didn't try to do without proper clamping.

    • @johnspathonis1078
      @johnspathonis1078 3 роки тому

      @@yrralyou Hi Larry My grandfather had access to traditional metal clamps. He used to build boats as well. When making the curved body of a mantle piece timber clock at all odd angles the clamps had to be applied quickly in a restricted space. G-clamps would not work. Also there would have been the equivalent of 15 or so G-clamps required or 30 rubber bands. The bands could be applied in a few seconds. Also when doing a production run of say 6 clock bodies he would have required 60 or more clamps (if they could be applied). This time period was also early 1960's so his technique was developed post WW2 in a time where everything was scarce. All his wood working machinery he built using timber. He just needed an electric motor a few pulleys and belts and some shafting. I know as a very young boy I watched him in awe. It was all about making do with what was available. If I had to build the same clock bodies today I think I would still use the rubber band idea. Cheers.

    • @yrralyou
      @yrralyou 3 роки тому

      @@johnspathonis1078 Individual projects are often built with methods used by fathers, grandfathers, etc.

  • @WhyDontYouBuildit
    @WhyDontYouBuildit 3 роки тому +8

    I couldn't agree more about the fact that owning a lot of things (including tools) soon become an hassle more than an opportunity. As someone once said: "'The things you own end up owning you".
    Also, being efficient and getting the job done with less, is very satisfying per se.

    • @1pcfred
      @1pcfred 3 роки тому

      I'd rather have tools I don't need than need tools I don't have.

    • @WhyDontYouBuildit
      @WhyDontYouBuildit 3 роки тому

      @@1pcfred Sure. But the point is that if you can get the job done without, you don't "need" the extra tool.

    • @1pcfred
      @1pcfred 3 роки тому

      @@WhyDontYouBuildit depending on the task I am often better off using power tools. They hold accuracy better than I can. Then there's the power aspect of the equation. My table saw will kick your ass ripping boards by hand. I'll run a thousand feet through it before you get up to 100.

    • @WhyDontYouBuildit
      @WhyDontYouBuildit 3 роки тому

      @@1pcfred That's for sure!

    • @1pcfred
      @1pcfred 3 роки тому

      @@WhyDontYouBuildit horses for courses. I have plenty of hand tools in my stable too. Still love me some power tools though. I am in the process of adding a new machine.

  • @beepo8221
    @beepo8221 3 роки тому +1

    Pony clamps!!! I've been dying for someone on UA-cam to drop that name. As a contractor Pony clamp's "cabinet claw" is essential. It's the one clamp that every kitchen installer needs to do a quality job with less than high end cabinets. Not so much a wood working tool but I havent installed a kitchen without them in 20 yrs. I prefer the older 90s version... but any awesome clamps. Lot of detail into ergonomics over aesthetics. It feels like the people who design them have worked in th field and have built them from real world knowledge.

  • @poochersmontgomery8825
    @poochersmontgomery8825 3 роки тому +48

    You inspired me over the last couple years. Thanks to you my animals have much nicer "cages" that look like real furniture. Im in the process of making a huge Chinchilla cabinet with just a hand saw, drill and couple of clamps in my apartment. Thanks so much!

    • @yiduoqian5046
      @yiduoqian5046 3 роки тому

      How did you do it in your apartment? is your room big? what about the mess?

    • @poochersmontgomery8825
      @poochersmontgomery8825 3 роки тому +6

      @@yiduoqian5046 lol it could have been a huge mess in a small space! I used my kitchen, which has a small island counter top as the work table. Its about 2'x2' and with some clamps and creativity did just fine. I also swept after every few major cuts and sanded outside. Tedious but worth it.

  • @criollitoification
    @criollitoification 2 роки тому

    Sorry I'm late to the discussion, just came across this vid, thanks Rex this was amazing and a reminder of how we can discover old traditional woodworking techniques to replace 20 odd modern jigs and apparatus that may cost a lot of money just to do one job! - I struggled for a long time figuring out how to hold long planks on my table to edge plane without buying 2 expensive vices at each end and then I discovered the old school 'Moxon vice', which are usually threaded iron bars that are wheel fed... Again I just rigged a semblance of it out of 2 f-clamps fixed underneath my table at either end... Now I can shape long boards and because there's almost no limit to the drop aside from the height of the table (unlike with a bench vice) it means I can clamp quite large panels onto it also!

  • @Kozilak
    @Kozilak 3 роки тому +5

    Rex, I’ve been a viewer of this channel for a very long time, I just want to compliment you on the production value of the videos these days. Great work

    • @RexKrueger
      @RexKrueger  3 роки тому +1

      Thanks for noticing! It's taken a lot of work.

  • @kevincozens6837
    @kevincozens6837 3 роки тому +1

    I've seen those adjustable wooden twin screw clamps before many years ago. I might have used one in woodshop at school many moons ago. Now I know how you are supposed to use them. All these years later I now know how to use one properly. :)

  • @merrickallard8488
    @merrickallard8488 3 роки тому +45

    I think Steve Ramsey is just the power tool version of you, your polar opposites but both have them same message of woodworking shouldn't be expensive

    • @RexKrueger
      @RexKrueger  3 роки тому +7

      Steve's an inspiration.

    • @Nevir202
      @Nevir202 3 роки тому +4

      I's say Matthias Wandel is his opposite, instead of using "as few tools as possible, to concentrate on the work" he spends all his time making tools. LMAO!

    • @merrickallard8488
      @merrickallard8488 3 роки тому +3

      Lol that's true, I'm not sure I've seen a matthias wandle video where he uses his tools to build something other than tools 😂

    • @LightCarver
      @LightCarver 3 роки тому

      @@merrickallard8488 There's the better mousetrap ones. Those are fun too.

  • @nobuckle40
    @nobuckle40 3 роки тому

    You know Rex, like most woodworker I have a lot of clamps. But, you know what I gravitate towards? Finding ways to clamp things without clamps. Right now I can't be at my normal shop but I still need to clamp stuff. I have four 6" clamps with me where I am. That means that I will have to find alternative clamping methods. I am totally cool with that. I appreciate your simple and economical approach to the craft. Thanks for posting this.

  • @josephdestaubin7426
    @josephdestaubin7426 3 роки тому +4

    At a door and cabinet shop we use parallel clamps and pipe clamps by the hundreds. You don't need more than that.

  • @charlesrussell9312
    @charlesrussell9312 3 роки тому +1

    Good video Rex. These are my go-tos on clamps. (With one exception.)
    My notes:
    The cheapest clamps that you might have overlooked are simply twine/rope and a stick (see your turning saw video). This may have been a method the Dominys used. Since the clamp is basically just a rope and a sturdy key, there would have been no noticeable artifact remaining as the rope can be used for other projects and the key was probably a piece of wood. I used this clamping method all the time as a kid and still use it today when I need one more clamp (Including this February on a bar top made out of 2x12s). Just remember to slip some cardboard or angle iron over any corners to prevent the rope from digging into the wood. It is also a great clamp for wilderness work since you don't have to haul heavy iron castings in your tool backpack.
    Pony-Jorgeson clamps are good. I recommend the F-clamps and their pipe clamps. That being said, I have had problems with their cast iron holdfasts and (avoid at all costs) the Jorgenson miter saws.
    Finally I love my adjustable twin screws. I saved up my allowance as a kid to buy a pair, and yes! I have done the basement floor joist storage trick. I do use them for glue ups because you can fine tune the pressure across the work. Then again, I grew up with them. To me they are a musical instrument of clamps.

    • @leehaelters6182
      @leehaelters6182 3 роки тому

      Agreed about how great those hand screws are, and how to tune the pressure. Once you have used some, you will always miss them if you are without!

    • @oliverdelica2289
      @oliverdelica2289 3 роки тому

      Ohh yeah. I've seen Chinese woodworkers, specifically Grandpa Amu, utilize it in their low benches

  • @sindarpeacheyeisacommie8688
    @sindarpeacheyeisacommie8688 3 роки тому +12

    Rex, you might go back in time to the Vikings...they had some interesting and clever clamps and wedges they used in shipbuilding.

    • @georgevantuyl5837
      @georgevantuyl5837 3 роки тому +3

      You are right. I spent a few days in Roskilde Denmark at the Viking Ship building museum 25 years ago. I got an amazing education in building with Axes, rope and pitch. Not that building Ling boats translates to nice furniture..

  • @geoffb108
    @geoffb108 Рік тому

    I enjoyed your rant about clamps . Ingenuity is the key to efficiently.you forgot to mention good ole weights, rub joints , and my favourite for small pieces,paint masking tape.

  • @JoeC92
    @JoeC92 3 роки тому +6

    Really nice thing about pipe clamps, when you work construction and get along with the pipe fitters, if they have left over pipe they'll usually give you it cause it will just be thrown out otherwise.
    I have so many different lengths because of this now.

  • @Aphorism89
    @Aphorism89 2 роки тому

    These days I am building a new main workbench. BUilding it with joints for long lasting strengh.
    I put glue, clamp up. Nail the joints and remove the clamps as I need to rotate them but I wont stop working on it ofc. The nail helps to keep the joints tight as I clamp them and this works specially well because I have 0 need to move the pieces anyway.
    Couple of days later, the bench structure is solid as a rock.

  • @ForgeFireCustoms
    @ForgeFireCustoms 3 роки тому +5

    An interesting "woodwork for humans" build would be the "viking clamps" that were featured in an issue of Mortise and Tennon. Two wooden jaws pivot on a stick, and you drive a wedge between them at the back to make them pinch shut in the front. They were used to hold boards in place when building longships, so they must have some holding power.

    • @chadjazeera9960
      @chadjazeera9960 3 роки тому

      I was just looking at an article on Pinterest about these! Very cool and interesting! Weird coincidence...

    • @leehaelters6182
      @leehaelters6182 3 роки тому

      Jeweler’s ring vise.

  • @dominicmogridge3920
    @dominicmogridge3920 3 роки тому

    thank you for sharing your thoughts.I quite often use a Spanish windlass,it's just a loop of cord slightly bigger than around your workpiece,then insert a stick,and wrap cord once, and turn to apply pressure.I tie a loop in the rope near the stick so I can secure it.sure you probably know the technique yourself,but very handy for squaring framing if you set at an angle.respect.mad dog.west cork. republic of Ireland

  • @eugenetswong
    @eugenetswong 3 роки тому +3

    [Rex, I suggest that you put the time stamps in the description. Each clamp time stamp could go in front of the coresponding list item.]
    Table Of Contents
    00:00 Intro
    00:27 ` History: Long Island Dominys
    01:31 ` Opening Cut Scene
    01:43 Merits Of Old School Techniques
    02:07 ` Dove Tail Joint
    02:57 ` Draw-Bored Mortise & Tenon
    04:34 ` Rabbet Joint
    05:32 ` Battens Screwed On Work Bench With Wedges
    06:16 ` Sprung Joint
    07:02 ` ` Misc Commentary
    See the description for links on where you can purchase these clamps. Buying them at the links will support Rex! :)
    08:00 42" Long Pipe Clamp
    09:17 2 Medium Sized Bar Clamps [a.k.a. F-Clamps]
    10:29 Adjustable Twin Screw Clamp
    11:55 Spring Clamps
    13:08 Conclusion

    • @RexKrueger
      @RexKrueger  3 роки тому +3

      Consider it done!

    • @eugenetswong
      @eugenetswong 3 роки тому +1

      ​@@RexKrueger I just saw an interesting use of the same thing.
      ua-cam.com/video/s6T4644ybpQ/v-deo.html
      They used "title cards" [or whatever; don't know what they are called], to show the people which were in each section. In your case, you might show each tool or technique being used.
      I'd be glad to volunteer to come up with the time stamps again, if you'd like.

    • @oliverdelica2289
      @oliverdelica2289 3 роки тому +1

      You're a hero! 👍👍

    • @eugenetswong
      @eugenetswong 3 роки тому +1

      @@oliverdelica2289 thanks!

  • @jandejongh
    @jandejongh 2 роки тому

    Thanks so much Rex; very useful views and tips! Loved @13:19: "I'm an American; love it when things are huge." We love you nonetheless 🙂🙂

  • @jeffspaulding9834
    @jeffspaulding9834 3 роки тому +84

    1868: "Did you hear ol' Felix Dominy passed away? His son should be arriving on the train tomorrow." "Indeed? I think I might sneak over there after dark. Ol' Felix had a bunch of clamps, and you can never have too many!"
    2021: "The Dominys didn't use very many clamps."

    • @leehaelters6182
      @leehaelters6182 3 роки тому +5

      I am still kicking myself and ruing the day I spotted a Craig’s listing by Wally Kunkel, Mr. Sawdust himself. He was letting go of all his clamps, bar and deep reach types, the old industrial ones like Hartford and Wetzler and such. A fair price, no gouging attempted. And an invaluable opportunity to meet the man himself, and maybe chew the fat a little. Was only a week too late.

    • @grumblycurmudgeon
      @grumblycurmudgeon 3 роки тому +11

      Actually, fun fact: Felix as was common at the time, made his own coffin. Indeed, it was during the final glue-up that he realized he had too few clamps to really exert the pressure he felt he needed for a box that is ostensibly air and watertight (and intended to keep him from being consumed by bugs and worms). T'was the stress of that very realization that _caused_ the fatal heart attack that did him in.
      Upon his arrival, the coroner found two things of significance:
      1. Felix's stiffening corpse still lying where his horror at discovering his clamp inadequacy had dropped him, and
      2. Felix used hide glue (of course; it would be some 42 years before modern PVA glue would be invented), and while its open time is brief enough, it's final set time (and its resistance to water intrusion) takes DAYS.
      Yes, the sad truth of the matter was Felix was _buried with_ his clamps... t'was the only thing holding his coffin together.
      At least he can be grateful there, though.... can you imagine how awful, how much darker things might have turned out if the poor craftsman had only had a few? Like maybe a half dozen? Especially if like half of those were like spring clamps? *shudder*
      That's no way for a man to live. Damn crying shame.

    • @ilive4livemusic
      @ilive4livemusic 3 роки тому

      😂😂😂

  • @TooShortPlancks
    @TooShortPlancks 3 роки тому

    I don't have a workshop, so everything needs to fit and store away within our shared utility room. It's actually been really good for helping me figure out which tools (powered and hand) are really worth it.
    Also, I find it very satisfying to knock stuff together with pegs...

  • @KevinOMalleyisonlysmallreally
    @KevinOMalleyisonlysmallreally 3 роки тому +6

    Nailed it

  • @gregmislick1117
    @gregmislick1117 3 роки тому

    If you still like clamps, but not buying them AND you like making your own tools... Check out John Heintz's videos on making clamps - F-Style clamps and the longer bar clamps. Pretty much using scraps, some threaded rod and a couple nuts and washers. They are quite elegant items when completed and could be fancied up into works of shop art in and of themselves. And since the most investment goes into the sliding jaw part, you could make up sets with multiple length bars for both the F-Style and the Parallel Jaw style - the fixed jaw and bar half being just some bits of wood, glue and perhaps a nail ( for clamping of course)
    Great Video Rex.

  • @MichaelCampbell01
    @MichaelCampbell01 3 роки тому +21

    God I totally relate to the "BIGGAR!" fantasy. Trying to do more with less is my goal, now; the fantasy is still there and it requires some self control, but I'm getting older and thinking about my son having to liquidate stuff after I'm gone, and MY experience with MY dad when he passed (he was a proto-hoarder; I may be too) gives me some pause.

    • @JustinShaedo
      @JustinShaedo 3 роки тому

      I'm that son right now. Throwing away ridiculous amounts of hardware etc etc. So from Australia, thanks for be considerate to your future generations.

  • @Skippy7189
    @Skippy7189 3 роки тому +1

    Another great video. Also liked the plug for Steve Ramsey. He was one of the first woodworking UA-camr's I watched. Got a lot of good shop ideas from him when I was using mostly power tools. These days, mostly hand tools thanks to you, Wood by Wright and wortheffort. I've been reducing the area of my shop to about 35% of my garage and have a layout that works pretty well.

  • @benchapple1583
    @benchapple1583 3 роки тому +4

    This is aimed at the author 'Rex Krueger'. I'm a craftsman cabinet maker, I've stopped now as I'm 59 and I'm done.
    'Sprung joints' are universally known as 'butt joints' and taking out the centre while making them, as you did, is de rigueur, although I'd use a trying plane instead of a jack plane for this. Normally you'd have two sash cramps on the bench and one over the top to prevent warping. Then you can move the board and do another one, or easier just do it on the floor. Using weights, as you did, means that your bench is out of operation until the glue grabs.
    Pegged tenon joints work but are unsightly. You said that in the 17th century everything was done like this. I disagree. I spent decades restoring antique furniture and never came across one. The normal trick with chairs was to not chop the ends of the mortice square but rather leave them angled, it's less work. The tenon is likewise angled but not enough to fit. The shoulders were cut by hand and quite often pretty crude. They they made the whole joint hot and wet and forced them together which would have necessitated a pretty powerful cramp. I believe that they assembled the whole chair at once like this to guarantee squareness and lack of wind. The effect was to deform the legs and 'print' the shoulders into them, it also deformed the tenons into the mortice for an interference fit. I don't know if they used one operation, which might be possible with animal glue, or took it apart when dry and added the glue later. Either way they were glued and some form of cramping was used.
    Another form of 'cramp' which I used all day, every day was bicycle inner tube. You can do so much with these that it's amazing. They are also free. Ask the bicycle shop for the old ones and they'll just give them to you. If you get one for a lorry then you can make one 25mm wide and about 20m long. You have to be careful as they can develop enough force to crush pine, not the hardwoods though.
    Lastly, low pressure veneering. Normally you need 4 bar for this. Imagine you have a table, lets 900X1.4 (I'm typing this message on one of exactly this size). Try calculating the force you'd need to exert over such an area, then you'll see the problem. I know how to do it using only small workshop equipment, and no I don't mean hammering with animal glue, I'm talking about modern waterproof chemi-sets. You will need cramps, 8 small sash cramps and all the G cramps in your shop, but you can do it error free every time. That's another story though. If interested, ask.

    • @rick5877
      @rick5877 3 роки тому +1

      Hey, In what seems another lifetime, I also restored genuine antique furniture such as you describe and can echo several of your observations. The joint examples you described I can only remember seeing in ‘Primitive’ American (pre-Civil War mostly) & only even earlier pieces originally from more rural areas Western Europe.
      In both cases, as I’m sure you know but readers may not, these pieces were most often built by farmers /rural residents from necessity, lacking the money to purchase them, and for personal familial gifts.
      Thank you for resurrecting some good memories.
      Go well, Rick J.

  • @huejanus5505
    @huejanus5505 3 роки тому +1

    A hobby of mine is fixing old furniture. My mom asked me to fix an old round chair that she got from her grandmother years ago. I needed 3 clamps just to hold 1 clamp in position, while simultaneously clamping 4 sections together on the chair. It all had to be glued together at the same time, quite a pain.
    The old saying is that every woodworker has too many clamps till he needs them.

  • @nagranoth_
    @nagranoth_ 3 роки тому +13

    Maybe they used apprentices as clamps "here, hold this!" :-p

    • @Timri3681
      @Timri3681 3 роки тому +6

      I was recently working on a very small "arts & crafts" type project for my wife. I had to glue a less-than-quarter-inch triangular wedge for a corner reinforcement. My wife came out to the shop and saw me just sitting on my stool holding and staring at the work piece. She asked if I was ok, and I responded sagely "When you don't *have* the clamp, you *are* the clamp." First the 3, 2, 1, light bulb moment, then she's laughing hysterically back into the house. 😁

    • @nagranoth_
      @nagranoth_ 3 роки тому +1

      @@Timri3681 LOL
      I generally just use masking tape for that kind of thing. It has just enough stretch to put a slight pressure on.

    • @cheryliverson6327
      @cheryliverson6327 3 роки тому +1

      cant drag my kids into holding things for me. i was using a saran box the other day to hold something

    • @Motocicleiros
      @Motocicleiros 29 днів тому

      ​@@Timri3681 LoL! Very funny! Now a small spoiler for the ones that may have trusted he was talking for real: this is just a joke. Being an "human clamp" is not actually possible because it only would work if someone would able to keep holding the parts together steady and firmly for 30 minutes while the glue does its initial cure, but I really doubt that someone can do this due to the level of strain (no one would manage to keep it for more than one or two minutes). Anyway when you don't have ANY clamp at all just tie the parts together strongly with a string. This is the poor man clamp, and trust me, is totally efficient.

  • @Maker_of_Things
    @Maker_of_Things 3 роки тому +1

    Have you tried rubbed joints to join flat boards?
    Plane square edge on two boards, apply glue to joint edges, rub the one board over the other to spread the glue and drive out air bubbles, finish rubbing the joint when it feels tight and the boards are aligned.
    Air pressure and surface tension will hold the joint tight and the boards can then be left on edge leaning against a wall.
    Works well with animal glues, and other glues with a short open time.
    I use it a lot with jointing flat boards as I often can't be arsed with having heavy clamps getting in the way of a small workshop.

  • @mattm1146
    @mattm1146 3 роки тому +4

    Another awesome video Rex! Love the anti-(clamp)establishment devil’s advocate viewpoint, and entertaining delivery as always. The marketers and money men really have their hooks into woodworkers when it comes to clamps, so this pragmatic (and historically accurate) perspective is refreshing. Hey another option for edge jointing without clamps: nail dogs (a la Paul sellers)!

  • @Jollyprez
    @Jollyprez 3 роки тому

    Funny thing - I saw a craigslist ad for 80+ clamps for $165. And there were a bunch of clamps exactly like the first one you used. You sold me on those clamps!

  • @ianhunt9520
    @ianhunt9520 3 роки тому +42

    First video after signing up for the Patreon. Been watching your stuff for ages and thought it was about time to show some support. Keep it up Rex- you're doing a lot of good work out there.

  • @anthonyboudreaux3675
    @anthonyboudreaux3675 3 роки тому

    Built all of my kitchen cabinets with solid wood and I get tons of complements. With no clamps and a circular saw. Used wooden wedges. Jointed boards with a sanding block. Can be done but it's alot more enjoyable with a shop full of clamps and stationary tools I have now.

  • @JohnColgan.
    @JohnColgan. 3 роки тому +18

    07:55 Rex: you only need a handful of clamps ....
    ... ... don't count the 34 hanging on the rack behind me !!

    • @Motocicleiros
      @Motocicleiros 29 днів тому +1

      34? I counted at least 47 including the small ones in the low side of the panel (they ARE clamps, aren't?)

  • @מעייןהמלבלבתחייםםםם

    Great video, loved the intro!!! You have inspired me into the the world of the hand tools- woodworking world I like your approach and I love hearing your insight!!!! Steve Ramsey inspired we to start woodworking and I love all his videos and hearing his insights too. For me you both are representing/ sharing the same views on opposite side of woodworking: You- hand tools- making it affordable to everyone, and frome the other side, Steve- withe is up to 1000$ power shop making. You both put in order all the background noise that is interfering, confusing and intimidating new woodworkers. So thanks!!!

  • @beerguy1002000
    @beerguy1002000 3 роки тому +3

    Wood is to expensive all I can afford is Clamps now!!

  • @telemime
    @telemime 3 роки тому

    Hi, Rex. My dad learned the craft through apprenticeship in Mexico City in the early 60s, and he did a lot of lasso tie-ups for his miter big boxes or miter cabinets. He "padded" corners on the outside with sticks and tied up, and then applied pressure on the tie by twisting up the cord from one side. Thus we got away with only a few clamps.

  • @pridler85
    @pridler85 3 роки тому +13

    First :P But in all serious That was a interesting subject thanks for a lovely video. I hope there will be no more panic attacks.

  • @chadwickpainter8212
    @chadwickpainter8212 3 роки тому

    Great video man as usual. I'm glad you mentioned the whole shop size and the getting bigger and bigger tools bit. Since I started woodworking I've had this mindset that I need more space and bigger/more tools. Right now my workshop is the back porch and a 4'x10' shed for my tools. I never really gave it much thought but what you said has a lot of truth in it. I do so much more and better work when I use fewer, less complex tools and I also get more work done. Thank you for speaking the words to help me realize this. Also, almost all of my tools are either refurbished or from harbor freight and they work pretty well because I've taken time to set them up well and maintain them but I suppose I've been sucked into the idea that I need super expensive big tools by what I can only guess is my ego. To see that old cabinet makers shop you showed in the first of this video humbled me a bit. I know personally I aspire to be as good as the great woodworkers of old and no matter what trade you look at, old workshops were small and had far fewer things in them focusing more on craft than crap. I'm going to change my outlook on this and go with exactly what you said, fewer tools of higher quality coupled with me learning to effectively use them. I'm so glad I've stubbled onto your videos. You are so informative as well as entertaining and inspiring. It is always a pleasure to watch your videos. Thank you so much.

  • @arrayofemotions
    @arrayofemotions 3 роки тому +5

    That panic-attack joke was hilarious. Well done!

    • @oliverdelica2289
      @oliverdelica2289 3 роки тому

      He doesn't want to get canceled from refusing to say "You can never have enough clamps"

  • @scottsmith81
    @scottsmith81 Рік тому

    First time I've seen one of your videos, I love how you explain and entertain us thank you very much. I will be looking all your videos up.

  • @stevezentz6207
    @stevezentz6207 3 роки тому +3

    Hey Rex I didn't find the link for the news letter or the you tube channel you mentioned. Did I miss it?

  • @machinistsapprentice
    @machinistsapprentice 2 роки тому +1

    Great Video Rex!
    I really struggled when I started woodworking since I didn’t have the clamps, I thought, I needed - now I know that I don’t need them most of the time 😁
    One recommendation for clamps, I have, are the ratcheting clamps, I use them quite a bit and they work really well for me :)

  • @peterides9568
    @peterides9568 3 роки тому +4

    I remember the moment that I realised bigger/more was not better.
    It was just after I got my first good table saw, a beautiful Laguna Fusion. A fortnight's pay, in cast iron and sheet metal.
    But I also needed dust collector. So i started reading about dust collectors. A week later I was researching the best value ducting, and how to modify my tools to take 6 inch dust hose... and how am.I going to build a router table into the wing of my new saw?
    Then Chris Schwarz and Richard Maguire got into my brain... with plane, saw and hammer, they were getting it done.

  • @WreckerWarsdotcom
    @WreckerWarsdotcom 3 роки тому

    i use very few clamps. i do use alot of wedges to clamp stuff. thanks izzy swan. if i needed a bunch of clamps i reckon id get 2 3/4 pipe clamps, get john heisz patterns for his 2 styles of clamps. way worse ways to spend 10 bucks.
    love your videos rex. i mostly build wooden models but your videos are making me want to try my hand at some different stuff, like a fancy workbench, maybe some furniture.

  • @martinoamello3017
    @martinoamello3017 3 роки тому +5

    I get philosophical about things all the time only to get those weird looks from people, but oh well.. I can live with weird looks.

    • @craftpaint1644
      @craftpaint1644 3 роки тому +1

      Start with a humorous example, then elaborate. Give pause for feed back or engage them with a follow up question. But sometimes it's just bad timing, they're just surprised 😐

    • @martinoamello3017
      @martinoamello3017 3 роки тому +1

      @@craftpaint1644 There seems to be a lack of a sense of humor among those I try to inject humor in my philosophical notions or perhaps my jokes just suck, but I like em, so as to quote my old man , 'Wait'll you get to be my age.' Then it doesn't matter if they think it's funny or not. I'm still gonna tell my old jokes.

  • @chrishtech1056
    @chrishtech1056 3 роки тому

    Having watched more than one Japanese carpentry video, I am happy to see more Americans appreciate fewer 'things' to do the job with.

  • @DaveWilliamsj
    @DaveWilliamsj 3 роки тому +5

    Power tools allow many mistakes to be created quickly...
    Manually, you plan to do it right there 1st time

    • @SpudGunTechie
      @SpudGunTechie 3 роки тому

      Or for some of us, make many mistakes to be created slowly. ;)

  • @johnfithian-franks8276
    @johnfithian-franks8276 3 роки тому

    Hi rex, the good old spring clamp, I use a lot of wood that need a thin front face, most people will use an air nailer with very small pins that are easier to hid after the glue dries. I don’t like the holes no matter how small they are so I get an old inner tube they was to be thrown away, cut it into small lengths and pull it over the clamp, then put the wood on the edge puss these clamps over the wood and let the small pieces of inner tube hold the item until the glue dries, remove the clamp and you have edge banding without nails.

  • @TheDrumminjay
    @TheDrumminjay 3 роки тому +5

    Hey Rex. Just wanna say that I really appreciate all that you do for us by making these videos. All the tips, research, and just all-around great content!

  • @hawkeyestiguy
    @hawkeyestiguy 3 роки тому

    Great video! I think part of the issue is that the majority of folks just copy what others are doing & at the same time the industry has gotten away from over, tried & true methods.

  • @beachbum5118
    @beachbum5118 3 роки тому

    gave all my pipe clamps away after getting a great deal on 20 Jorgensen I-beam clamps. Made all my door making become simple and problem free all the years after that. One clamp you might want to also have even if its one or two is the Merle miter strap clamp. best clampin the world for doing mitered frames and odd shapes. Made making mitered frame and paneled doors doors a snap.

  • @bobbylibertini
    @bobbylibertini Рік тому

    And PS. I love your minimalist less-is-more philosophy! I'm the same way. I'm hesitant to get into new things if I think it will require getting a bunch of crap. I look to do something, and the first thing I ask myself is "How can I do this with the fewest tools/supplies? How did they used to do it? How would a farmer/hillbilly do it? How can I improvise or use something else rather than buying more crap?". The less you have...the better life is. Grew up poor, and never tried to compensate, like a lot of my peers did...who are now all mired in debt and still not happy.

  • @eukaryon
    @eukaryon 3 роки тому

    Getting by with less - a while ago two carpenters put on a demo at a street fair and built a kitchen table that day using 18th (i think) century tools. Fine tooth buck saws, chisels, mallets, draw knives, that's all. It had angled apron with dovetailed drawer and slightly splayed legs. No glue or nails, just joints and pegs. Of course they were skilled, I think it took less time than power saws because there was no setup time. Beautiful to watch.

  • @jguil4d
    @jguil4d 3 роки тому +1

    So those spring clamps:
    I got this idea from Mike Farrington, but I went down to my local REI and got a couple broken bicycle inner tubes for free from their repair shop, cut them up, and used those to turn my spring clamps into bandy clamps to put some home cut edge banding onto some cabinets. And if I can make perfectly functional bandy clamps for $1 each in Fairbanks, Alaska, you can make them super cheap ANYWHERE.

  • @rjh6380
    @rjh6380 3 роки тому

    Excellent info. I love the part about keeping the shop small and quality driven.

  • @kevinxxx8093
    @kevinxxx8093 2 роки тому

    I enjoy your philosophical chats, and I love your sense of humor.

  • @BLMeredith87
    @BLMeredith87 3 роки тому

    While building a box frame for a desk I just tightened some reusable cable ties around it to dry, worked a treat

  • @fisharmor
    @fisharmor 3 роки тому +1

    I actually have used C clamps quite a lot. I love them because they take up little storage space and are great for face-to-face glue-ups.
    Also, if you think clamping stuff to your joists is neat... observe that a standard milk crate fits between joists very neatly. Get about 24" x 4" of thin sheet metal (computer case and metal 2x4s work) and bend it up at both ends with about 14" in the center, then drill some holes in the ends and screw it to the joists with enough vertical clearance to slip the crate up there. It makes for awesome long-term storage for stuff you might go years without touching again.

    • @leehaelters6182
      @leehaelters6182 3 роки тому

      Now make it swing up and down, and latch in place.

    • @fisharmor
      @fisharmor 3 роки тому

      @@leehaelters6182 you say that like I didn't already do it with two crates and cantilevers, fishing-box style. :D
      But I actually don't find the gadgetry as useful.

  • @daveparker839
    @daveparker839 3 роки тому

    This newbie woodworker just stumbled upon your channel. Great vid-especially the twin screw clamp. Never understood why anyone would want one, but do now! Thanks for the explanation. New subscriber!

  • @WaelMuhammadMahmoud
    @WaelMuhammadMahmoud 3 роки тому

    One of the most inspiring woodworking videos I have ever watched... and i watched aloooot
    not only the many ideas your brought up,,, but also the philosophical ideas of doing more with less
    Thank you