Mine wound not start. Manufacture sending me a new unit. I took original apart and fixed the micro pressure switch. Has contact point that I cleaned and applied electrical contact lube. Has been working now. 😊
Yes. Didn’t really need cleaning. Just slight amount of lube. I used silicone grease on I toothpick. Make sure little metal piece is oriented correctly. Might have shifted. Just flip washer over and remove 4 small screws from black switch box.
@@TimRoach-oc6rl nice I'll give this a try. Any idea what would have caused the switch to jam up or fail in the first place? My unit was only used 3 times so my failure point might be something different
And, I did not note before, after you remove 4 screws,try and manually activate the switch with thin screwdriver and listen for click. If you do not hear click, pry off the cover on the actual switch. You will see how easy it is for parts inside to get out of placement.
Man I’ve wanted one of these but after all my research I’ll stick with my loud gas powered pressure washer it can run a 100ft water hose without surging its ran well over 300+long hard hours still fires up on its first pull this 2.0 thing I can’t use a 10ft water hose or u risk damaging the machine then have to return it for $350 this machine shouldn’t have no problems at all my gas powered craftsman cost me $150 I can use a 1.1 without a damn thing going wrong my foam is thicker then a lady that’s 280 I don’t have a detailing van yet so I sometimes gotta run a 100 ft hose my clients cars aren’t always next to a water spigot this thing u gotta be right next to it maybe when I get my detailing van I’ll use this on a water tank but for portable this doesn’t work seems like a waste of money to me if u don’t have a detailing van or trailer setup or shop to wall mount it
I run mine off 100 foot garden hose all day long. You’re right though if what you have is working good and works for you just stick to that and save the money.
Active 2.0 is the same company that made the cat this machine is supposed to be twice as good. I washed my vehicle with the CAT Version 27 times and it SEIZED UP GARBAGE So the 2.0 active version should give me about 60 washes that’s ridiculous. Don’t waste your money. These under $500 washers are junk.
I have a Kranzle and after two years it would be starting and stopping on its own. I had to ship it back to Kranzle in Maryland for service. It took two months to get it fixed and returned to me. Many pressure washers need to be repaired at some point in time.
Mine is doing the same thing. Won't shut off and I've tried running water through the system for several minutes to purge air and no luck. I've emailed them twice now with zero response.
@@lcrazyaznlThey finally got a reply to me this morning. I've gone through the troubleshooting steps they requested so I guess we'll see what's next. I've preordered the Australian Bioboi Washr pro either way so if they do get a replacement sent my way, I'll have a spare.
Lmao I took mine to the desert and shot it up 💥🪦 after the motor blew haha. It was the version with the common pressure issues so i wasn't surprised it failed on me. I have an ar630 now 💙 and couldn't be happier.
Mine wound not start. Manufacture sending me a new unit. I took original apart and fixed the micro pressure switch. Has contact point that I cleaned and applied electrical contact lube. Has been working now. 😊
Nice!!
I think I have the same issue. So cleaning was all it took to fix the switch?
Yes. Didn’t really need cleaning. Just slight amount of lube. I used silicone grease on I toothpick. Make sure little metal piece is oriented correctly. Might have shifted. Just flip washer over and remove 4 small screws from black switch box.
@@TimRoach-oc6rl nice I'll give this a try. Any idea what would have caused the switch to jam up or fail in the first place? My unit was only used 3 times so my failure point might be something different
And, I did not note before, after you remove 4 screws,try and manually activate the switch with thin screwdriver and listen for click. If you do not hear click, pry off the cover on the actual switch. You will see how easy it is for parts inside to get out of placement.
Is this the same as the Adams 2.0?
You know I want to get one of these, but to be honest I’m worried to death lol - update, I caved and bought the 2.0….i love it.
Nice clickbait 😂
Thanks
Man I’ve wanted one of these but after all my research I’ll stick with my loud gas powered pressure washer it can run a 100ft water hose without surging its ran well over 300+long hard hours still fires up on its first pull this 2.0 thing I can’t use a 10ft water hose or u risk damaging the machine then have to return it for $350 this machine shouldn’t have no problems at all my gas powered craftsman cost me $150 I can use a 1.1 without a damn thing going wrong my foam is thicker then a lady that’s 280 I don’t have a detailing van yet so I sometimes gotta run a 100 ft hose my clients cars aren’t always next to a water spigot this thing u gotta be right next to it maybe when I get my detailing van I’ll use this on a water tank but for portable this doesn’t work seems like a waste of money to me if u don’t have a detailing van or trailer setup or shop to wall mount it
I run mine off 100 foot garden hose all day long. You’re right though if what you have is working good and works for you just stick to that and save the money.
Same thing happeneded to mine today. Going hit them up about warranty! Thanks for the info
You’re welcome hopefully they take care of you
They replaced it in a week 🎉
Active 2.0 is the same company that made the cat this machine is supposed to be twice as good. I washed my vehicle with the CAT Version 27 times and it SEIZED UP GARBAGE
So the 2.0 active version should give me about 60 washes that’s ridiculous. Don’t waste your money. These under $500 washers are junk.
I think the switch overall is a bit wimpy. I’ve been looking around for a possible replacement. Will update if I find one.
Don’t pair up pressure washers that’s just stupid
Got oil leaking from mine and contact them about 3 weeks ago and no come back so far .
Oh man that sounds pretty serious too. You should definitely reach out to them again I had to contact them twice on this unit.
I have a Kranzle and after two years it would be starting and stopping on its own. I had to ship it back to Kranzle in Maryland for service. It took two months to get it fixed and returned to me. Many pressure washers need to be repaired at some point in time.
I have the same issue, sad that they can’t take it back and refurbish.
Wow. Another awesome video with an honest review. Thank you so much for keeping it real and HONEST.
I had mines less than 6 months and mines don’t even turn on I literally used it twice
Oh man that’s not good. You should definitely try to contact them.
Mine won't even stay on.
Would be best to contact them for replacement
Mine is doing the same thing. Won't shut off and I've tried running water through the system for several minutes to purge air and no luck.
I've emailed them twice now with zero response.
Their email system is slow give them a call. I got mine replaced in a week. Slow email responses but they took care of me
@@lcrazyaznlThey finally got a reply to me this morning. I've gone through the troubleshooting steps they requested so I guess we'll see what's next.
I've preordered the Australian Bioboi Washr pro either way so if they do get a replacement sent my way, I'll have a spare.
Clickbait
lol I literally did throw it away 🤦♂️
Lmao I took mine to the desert and shot it up 💥🪦 after the motor blew haha. It was the version with the common pressure issues so i wasn't surprised it failed on me. I have an ar630 now 💙 and couldn't be happier.