In order to access your videos or to purchase lock picks and beginner thief kits, there should be a code that a person must enter to show they have a locksmith license. Otherwise, thieves use your knowledge, tools and step-by-step guides as a one-stop breaking and entering site that put vulnerable people like me in harm's way.
@@CherylNewmanNonPCNewsandViews - uh no. That's the same fallacy as saying that we shouldn't test computer security. "Security through obscurity" is a wrong-headed notion, as it handily ensures that *only* bad actors have the knowledge- the people likely to abuse it. Moreover, without knowing what's insecure and why, people can never improve their security, nor is there any incentive for manufacturers to fix their products. Moreover, thieves tend not to sit around and pick locks. They break windows, break weak doors, cut bike locks. They're opportunists, and value the quickest and most efficent method. A policy of official ignorance is the enemy of security every single time- in any field. If the information isn't out there, then you can't make good decisions when your threat analysis tells you that you have a security-critical installation. Commercial companies can and will sell you "security theatre" (hi, Masterlock) to make the big dollars, while knowing they're only providing the illusion of security. Sunlight is the best disinfectant, and informed customers/users help make vendors honest. You don't need to worry about the lock nerds on youtube, anyway. You need to worry about the guy with the housebrick, and your easily-accessible downstairs window. Worried about your bike? It's the passer-by who just happens to be carrying bolt croppers that you need to worry about, not the locksporter who'd need ten minutes to pick their way in.
@@invisibleoc This isn't a computer that has virus and malware protection software and can have code written for new hackers. They also don't sell beginner hacking kits w step-by-step visuals. Furthermore when you say key manufacturers can use a site like this to improve their products, then they also need ppl like me to comment on such sites that destabilizes my safety. As well, this site isn't teaching smash-and-grab burglary, but detailed ways to break into any lock along w beginner kit sales. The only ignorance here is comparing apples to oranges.
These videos are a complete revelation. Before I started watching them I was completely ignorant about locks, and basically I thought one lock was as good as another - boy, have I had my eyes opened! Thanks, Bill. I really appreciate the trouble you go to when you make these vids.
now you know that basically all locks are worthless to someone with enough desire. Locks merely keep the honest honest and locksmiths employed. Burglars usually just kick the door in, no bumping nor picking needed lol
Its insane. They should make this sort of thing mandatory viewing in school. I mean, its not like they're bothering to teach our children how to _spell_ any more, so the least they can do is teach them useful life information like this...
Oh my goodness, that "spring loading" the bump key is genius. I had to bump a lock I couldn't pick just last night and was even having a little bit of difficulty bumping it. I eventually got it, but it puts a bit of strain on the hands and fingers having to pull out the key every time. Thank you for this video.
Never in a millions years could I have answered the question "what do castrated goats & lock picking have to do with each other?" And now I can answer that with 100% confidence if ever asked. Friken sweet!
BosnianBill, Thank you for producing these great videos! I am disabled and bored out of my freaking mind. My nephew is a locksmith up in Oregon and he got me a set of picks as a joke (he doesnt think I can pick locks I guess) I have pretty much picked every lock I can find around this place (had a problem with a few but after watching your videos I have gottem much better) I have now ordered a set from Sparrow and got a 39 piece bump key set and a set of jigglers.. I still have problems with my hands most days and cant do anything but on those days I fill it with watching your videos..
That's awesome man. My dad's disabled and out of work too and I always tell him he needs a hobby. He's got a bad back so he can't do anything active, which is what he's done his whole life. I don't know what's wrong with you but I think it's really cool that you're nephew even sent you lockpicks as my cousins can't even take care of themselves (they're degenerates.)
Not sure about where You live and how disabled You are but since You can pick locks with a certain ease You could make a living out of it where I live. Great hobby either way.
You should learn to pick with your mouth, then challenge your Nephew to a lock picking dual next time you see him, preferably in front of his girlfriend.
And when you consider just how many dishonest people there are... I dont lock many of my valuables up, any more. I've adopted a new technique of "keeping it within eyesight" if it really matters to me. 😒 The only lock I've seen pass both this channel and LPLs channel is the Bowley lock with those 2 internal steel cylinders. Resistant to bumping, basically impervious to picking, solid steel construction resists melting, no plastic mechanics... its basically what all locks _would_ be like if people weren't happy with buying crap locks instead.
LOL The bike ad at the end just set me off laughing at work. Everyone came to my office to see what was so funny. It real funny to me because I'm having the same "discussion" with my wife. ;)
Dear Sir, I would like to express my deepest gratitude for not only your videos but to you ( you're like a mentor that I've never had the chance to meet ). I studied your videos and downloaded a lot of books about lock picking for having a lot of sudden interests in it. I stick to the 2 "Golden Rules". Once my friend need somebody to open the computer lab coz only one person holding the keys but she wasn't there.I am an ordinary English teacher, sir. He turned to me and I opened the wafer padlock with a paper clip and the grill lock with a fluffy dust brush's round edge ( it's a twisted wire handle type ). But all sudden a lot of people looked up to me, even some worry bout my newly unknown shown potential.Just wanna say that you inspire the whole world. Thank You Very Much :)
My friend, YOU, that's right, YOU, make the best instructional videos on all of UA-cam. This was excellence from beginning to end. Clear, concise, complete and fun to watch.
Hello what's up my people I'm disable but that does not make me do bad things in life,what it does is make me & my mine think a little better like how to work on my car which i personally thank the you tube app. For showing me the good ways of working while Beeing disable I've learned a lot threw this you tube app. And i would like to say Thank you (UA-cam.com) For helping me learne lots of skills and tecnics. That i never new ...yours truly Mr. E doggie dog .
holy crap I just made a bump key. just bumped EVERY lock in my house. guess those are also being replaced. again...damn it bill, costing me money by teaching me yet another skill. thanks.wheres that video, bill. still waiting. snow aint that bad.
To Samuel, the lock you are bumping is looking for /or needing the key tip to engage the cam. Next time you bump it open, turn the key and then cut off your rubber washers. press the key in to engage the lock. You did not say what type of lock it is but some profile cylinders use this system. Might be C.E.S. but I'm not sure.
I love your videos. Lock picking is something I have always wanted to learn, but due to the fact that NC has a law stating only licensed locksmiths can own lockpicks, it's put a damper on my fun
toool.us/laws.html says otherwise. According to them, you can own all the lockpicks you want - you just can't charge someone else for locksmithing services unless you're a licensed locksmith. "North Carolina does not criminalize possession, but lockpicking demonstrations in that state should always be free so that they never fall within the definition of "locksmith services." Locksmiths must be licensed, and there is a Locksmith Licensing Board."
Very cool Bill. I don't normally bump or rake. I mostly SPP. However, I have been trying to learn how to bump correctly for emergency situations at work. anyway, great video.
My god I bought a lock like this, i'm in UK. I cannot find a single lock that I am able to pick because of the strong curves. I am so glad it's not just me and that you found problems as well. I want bump keys now.
I have a door lock at home that i need to jiggle dramatically as it always sticks. I have a few spare keys. I think I will file off the stop point and add a few sheep tail bands as shown here. It will make it much easier. I won't need to file the rest down to a bump key though. I'll basically just replace the stop point shoulder with the rubber so it springs much easier.
Just found this video and had to laugh at the castration bands you mention. I live in a farming community and that is what I carry for my bumb keys. They work really well and are really cheap (if you can't just grab a handful from a pals farm).
Nice bump demonstration. Also gorgeous bike. I've a ZX-6R myself, probably a little late but for anyone else looking for advice giving your girlfriend occasional rides on the back might help. Start it slow and without filtering too much but that should save your bikes. That said I bought mine with 100 miles so maybe I shouldn't be helping too much.
Excellent video. I will probably never have to do this myself, but is is exemplary of the 'handmade, tricky, generic-looking tools' this activity requires. I've been known to mill quite a few 'handy little tools' in my bathroom with a dremel, and you can't go wrong with a set of diamond needle files (like sandpaper that never fades), Personally, I think bill would do well to go full-AvE and do a few full-length recordings of him making a custom pick, or grinding out Master 410 cutaway.
There is no need to remove the entire shoulder of the key ... cutting it back about the thickness of a quarter is sufficient ... the pins will re-seat and move the key back out to the ready position after striking it .
Pimp ass vid Bill!!!! Good knowledge, shown the correct way!!! I learned this from you about 6 years ago in another video of yours. I really need to send you some 💵..... your knowledge, which has become mine has been more than useful. I’m very grateful brother, ttyl!!
Bill, The Last picture on the video had me rolling with laughter i've been thru that "do whatever the F*** you want" and let me tell you... it means NO not maybe not get it and lets see... it just means NO... lol me and my wife both had a laugh at that one. speaking from experience it was funny to see others do the same thing.
I have done locks for years and only used my pics. Never tried bump Keys before, but after seeing this video I will start playing with them. A Kwikset lock should be a piece of cake. But you won't be able to do that with a medico. LOL
I know how to make a lock no one will steal from you with. Get a lock like this, then get a master lock case. When they fail to pick it, they don't want to be around for anyone to see they tried.
I left the shoulders on my keys but instead of trying to rap it in and turn it with perfect timing,I slipped an elastic hair tie thru the key "eye"put my fingers thru the 2 loops protruding on eitherside, stretched the elastic over the knob or lock ,put a 90 degree twist in my hand position and put the key into the lock, Now to open it you justpull the key and let it go -like a pinball machine and the lock will be opened in 1 or2 shots because you don't have to time the twisting action, it's done for you. the hair tie is cloth covered and 2" in diameter. I can open my two deadbolt front door locks faster and more quietly than with the house keys.
Thanks, Bill. Is It likely they used the same type of spring for all the pins? If they had used springs of varying springiness, would that have made bumping it significantly more difficult? Thx.
using the instructions in this video; I walked in to my friend's house after he locked the door on me XD. I think the power has gone to my head... I did it to my grandma's door and my brother's door. No one I didn't know yet...
Bill my man, I came upon your channel recently and have learned a lot from your video's. I like how you take the time to explain everything in great detail. The camera quality is great, you make sure it focus's which is a real bonus, you get shots and angles that work really well. I would like to say thank you for all your time and effort. Don't ever let the haters get you down, they are just jealous because you are doing well at what you do. You never see a hater do anything successful on UA-cam or any where else really? I do have one question, I haven't been through all your video's as of "YET", but was wondering if you do safes, or digital locks? I have been picking for some time now, and think I am going to try to master popping safes open. I have had two calls in the last 5 years for this service. I got in both times but the safe was not pretty nor functional after....LOL If you do have videos on this could you steer me in the right direction of them. Thanks once again and play safe!!!!
He, neat trick on the lock there! :) I tried bumkeying a padlock, had some succes, but i didnt have my bumbkey set up like this with the grommets. I will try this once i have the time and money. :D Thanks! Jeff
@Bosnianbill if i presume well most likely you understand ''nasi'' :D ..svaka ccast na odlicnom videu,i objasnjenju bump key-a.. nego, jesi li prod'o motor :D :D :D.. motor je STRAVAAA dobar! Pozdrav i LP. good luck in your future videos :D zdravvoooo
That was fast. According to Evva that lock is 100% bump proof and extremely pick resitant. That just shows locks are only to help keep people honest. A $280 lock should be a bit harder. nice explination.
Ok Bos, when you get to the part where you remove the stop at the back of the key, maybe leave a small portion of it so the rubber washer stack can be smaller? It just seems icky to remove the whole thing...
Amazing information! I never heard of bump keys before. How does the actual physical action of bumping the the key work to unlock the lock? I am just curious cat.
Each time you hit the bump key, the ramp at each position throws the pins flying upwards. If you turn the key quickly enough you can open the lock before the pins land.
I knew instantly what those castration rings were, just about fell off my chair laughing! Never in a million years expected to see that on a lock channel.
LOL. Oh, and I just saw the bike for sale. Very nice!! Hey, in addition to the leathers and helmet, does your man card come included as well? LMAO!! Don't feel bad buddy, I'm in the same boat.
Hello, everyone. I tried using bump keys & it didn't work at all. They fit in the lock, they seem to match up with the regular key (the points have the same spacing), but they won't work. Tried using the multi-tool & the screwdriver handle for a hammer.
hey, these videos are great and informative... just one request... could you also provide a list of pawn shops that might have lax morals when it comes to buying "re-appropriated" goods? 😏
Masterlocks are the easiest to get into, so some thing(s) is/are definitely wrong here: A.) Look at your equipment. If you're breaking things often, especially tension wrenches, they may be cheap knock-offs that aren't up to the task. Get a beginners set from Sparrows (often advertised by Bill), or at least find a set that has thin tools that won't easily bend or break. Tensioners should come in a few thicknesses though, and won't be as thin as the picking tools. B.) Look at your technique. Another possibility is that you're putting too much force into the tensioning. Too much tension and you'll jinx the operation because you won't be able to feel the feedback from the lock if you don't bind it up first (i.e. jam it). Let off on the pressure and see if that helps, and maybe be a little gentler with the picking tools too. Also, look at how how you're tensioning it. If the tensioner is twisted in the keyway, it may push to one side rather than provide a nice round torque, and that would cause the lock to bind and you'll pick it all day with no success. Make sure the tensioner twists the cylinder rather than pushes it to one side. Finally, be careful not to overset the pins. Be very careful with your pick as you push against the pins, at least until you get a feel for picking. If you push too hard on the pin it will go up further than you want it too. Easy to fix...simply let off on the tension a little until the pin drops back down. C.) Look at your lock. Maybe the lock is old and rusty or has grit inside it that will make it difficult to pick accurately. Rust and grit may make the pins stick, so consider giving the lock some good old WD-40 and see if that helps. Also, is it a basic lock, like the #3, or is it a more advanced lock that might (unlikely, but maybe) have something tricky (for beginners) included? Perhaps you happened to pick a rare good Masterlock, or maybe it's a basic one that needs some maintenance. D.) Look at your key. Does it have at least one really high tooth right next to a really low one? If so, you may be the victim of radical bitting (heights of the pins), which makes it trickier to pick/rake. I _think_ Masterlock creates each key completely randomly, so some have a straightforward bitting while others have somewhat nastier bitting. If you find that you have a lock with radical bitting (as evidenced by the key) never fear, it's still an incredibly low security lock. However, you might not be able to rake it, and patient pin by bin picking may be your only option (as far as keyway tools are concerned). You could of course always try to shim it, jiggle it, or bump it, but I assume your intent is to practice hobbyist lock picking. I have a Masterlock myself that has given me trouble. It's a #3 lock, so it should be really easy. However, I'm still a beginner at lock picking myself so my skills aren't up to par, plus I have multiple things going against me. 1) The keyway does have a case of radical bitting. The key number is 3602, and the seems to correspond exactly to the teeth on the key, where 0 is the lowest position and 6 is the highest, I thus have to pick from back to front a med set pin, extremely high set pin, an extremely low set pin, and then a very low set pin (in order of position, not order of picking). That makes it very difficult to not overset the first two pins. You just have to be very careful and use a deep hook pick if possible. 2) It is an old lock that is rusty and almost certainly has some sand in it. The third pin, the extremely high set one, is very difficult to pick with too much tension and I usually have to back off on the tension for it. Also, the lock has a high-tensioned cylinder (probably rusty springs), so occasionally I have it picked and don't realize it since I needed to exert more tension. However, I haven't bothered to give it any WD-40 yet...maybe I just like the challenge. 3) My lock picks are junk (sort of). They are essentially survival picks, no longer than my thumb. I got them as part of another tool for their novelty. Since they are so tiny, I have to work them with my fingertips, which is quite uncomfortable, and doesn't provide great feedback. It works though and I haven't broken any yet...for being cheap they are surprisingly strong. I can't _wait_ to eventually buy a lock pick set that is full-size!!! 4) All that said, I have managed to pick the lock multiple times, both with raking and picking. I've never been able to get a really good feel for the lock, due to the disadvantages above, so each time I pick the lock it's somewhat random. A better lock pick set and better skill would help that, but the point is that if I can pick the lock with all those things going against me, then you can do it too. You just have to have patience and understand each problem you face. Here are the various locks I've tried to open thus far without a proper key, the reason, the method, success/fail, and the scale of security on the lock (0-10): 1) My first lock picking experience: At college I attempted to pick my dorm room lock (with the survival set mentioned above) multiple times because it was a safe lock to practice on. Method: Raking and picking. So far, no success. However, I will revist it later on when I return to college, especially as now I have become better at lock picking. I'd have to see the key again, but I believe it is a six cylinder lock, and commerical grade, so I believe its security is between 5 and 8. 2) At work there was an unused, empty lock box that was missing its keys. I needed to find out if we could use an existing key to open it in case we needed to use the lock box. The key fit, but did not unlock it. With some ingenuity, I decided to try to jiggle the key back and forth, and have since proven many times that the method with that key WORKS!, every time like a charm, and easily too. Method: Jiggling. Security on the lock: 1-2...haven't tried picking it, but is jigglable and is a pretty basic lock. We still haven't used it for anything. 3) Also at work we had a miniature cash drawer that was locked up and someone misplaced the keys to it. We needed to use it at that moment, no time to waste looking for the key (which didn't turn up until a few days later). So, I tried to pick it with a paper clip. SUCCESS in a few seconds. As it turned out, it barely needed any picking, since it only has maybe two pins. Method: Picking--if you can call it that. Security: *-*2. 4) Also at work: Someone locked the electrical panel leading to the thermostat. It was winter but a warm day and sun was streaming through the windows. The thermostat was incorrectly set to heat instead of auto, so it even though it wasn't pumping out any heat, it also wasn't cooling off anything. The sunlight managed to heat one room up to over 90 degrees F. No one had the keys to the electrical panel, so I grabbed a couple of paperclips and started picking it. SUCCESS in about a minute. Similar to #3, I soon discovered I really only had to push the front pins (one on the top, one on the bottom) out of the way and then turn the lock. Fixed the thermostat and everyone was happy. I have since repeated the procedure several times when necessary, so complete success as far as picking is concerned. Security: *-*1. 5) The Masterlock mentioned before. It's an old lock my dad gave me, and I use it mostly for lockpicking practice. First attempts were unsuccessful, since this was actually the second lock I attempted to pick after my dorm room door. Sometime after #3 and #4, I decided to try it again, and finally got my first open on it. Have since picked it many times, sometimes successfully and sometimes not. Success rate: Kind of random. Method: Racking and picking. Security: 3. 6) Also at work we have a small cheap lock that fastens a chain together, mainly to make it child proof and slightly deterrent. It was a bigger hassle for us to use the chain, so we finally retired it. Before doing so, someone who was interested in my lock pick set asked if I could pick the lock. I said, yes, or at least I thought so. So I tried, a little nervous that it wouldn't open for me. It did though in about 30 seconds. SUCCESS. Plus, it was fun watching everyone's eyes pop out when it opened so fast. Method: Picking (initial raking didn't yield anything). Only picked it once, but it was obviously a cheap lock, not very many pins. Security: 1. So, I haven't picked anything harder than what I think might be a 3 so far. Not sure if I could pick anything harder, but would be willing to try given a good, legal reason to do so or some free time on the locks at home. Would like to get good at lock picking for government work. All that said, I'm just an amateur, but experience has taught me a few lessons that may prove helpful to you in A-D. Sorry for the long essay, but hopeful you find it helpful/encouraging/interesting.
Benjamin Hackett it's not the average master lock. It is a special kind of lock that are supposed to be 'antipick' but they aren't imposible. I got into it in the end. I use quality stuff.
about the bump key... I got the idea of the depth of the grooves but you had the original key so you knew you needed 5 grooves. If you did not have it, how would you make one? I am not challenging you anyway it's a matter of understanding. I help people that need to open lock due to lost keys and just to give you my background; my first padlock was opened by accident. I was bored and I found a padlock. I also had a paper clip and just playing with I started understanding the mechanism of it by feel. Most combination locks I use the feel of the pins. 😇
+Gilvam Carvalho the length of the key can reach the 6 pin .if you look at the edge that hits the pin to bump it the tip will be 6.on some locks anyway, all brands are spaced different so make one of each .
Any idea if you could cut keys with a milling machine? Don't have a key cutter, but I do have a 3/4 size Bridgeport (actually a clone of a clausing) in the shop.... Thinking of rotating the head to a 45 degree angle so the corner of an endmill would cut the notch. Either that or get a replacement cutter for a key cutting machine and make an arbor for it.... My thinking is that with setting up a way to hold the key in a repeatable position, I could figure out a chart that translates cut numbers into thousandths that I can dial in on the feed cranks. Have the key vertical, and then just start at the top, set the depth of cut, do the pass. Then raise the knee up to the next position, reset the depth, and make the cut. If I can figure it out and make it work, I might do a video on code cutting keys on a milling machine...
Tried making my first bump key and ended up with key stuck inside of lock and couldn't pull it out. I'm guessing that I filed my grooves down too deep. Was wondering if that's what I did wrong?
Thank you! I'm going to play around with this, so I'm thankful for this advice. I won't try my front door until I'm reasonably sure I know what I'm doing. 👍
Question from a newbie re filing: To me it looks like the file is too big for filing the pin positions that are close together. In the process of filing one grove wouldn't you take out the adjacent pin? TIA and thanks for the interesting vids.
Exellant making of the bump key,you are a pain in Eva or any lock company,you are just too experiancbed Bill,i love all your videos and a subscbriber for life,cbheers Mal in BC.
![[356] Banggood Lock Pick/Snap Gun Review](/img/n.gif)
"Do whatever you want" does not mean do whatever you want. ABORT ABORT!
Seth, you are the ONLY person to get the joke, and this has been up for a WHILE! 👍😋
I try man. Loving the videos, actually order a couple picks and an ez decoder off your suggestion for a beginner set. Sparrow is awesome.
In order to access your videos or to purchase lock picks and beginner thief kits, there should be a code that a person must enter to show they have a locksmith license. Otherwise, thieves use your knowledge, tools and step-by-step guides as a one-stop breaking and entering site that put vulnerable people like me in harm's way.
@@CherylNewmanNonPCNewsandViews - uh no. That's the same fallacy as saying that we shouldn't test computer security. "Security through obscurity" is a wrong-headed notion, as it handily ensures that *only* bad actors have the knowledge- the people likely to abuse it. Moreover, without knowing what's insecure and why, people can never improve their security, nor is there any incentive for manufacturers to fix their products.
Moreover, thieves tend not to sit around and pick locks. They break windows, break weak doors, cut bike locks. They're opportunists, and value the quickest and most efficent method.
A policy of official ignorance is the enemy of security every single time- in any field. If the information isn't out there, then you can't make good decisions when your threat analysis tells you that you have a security-critical installation. Commercial companies can and will sell you "security theatre" (hi, Masterlock) to make the big dollars, while knowing they're only providing the illusion of security. Sunlight is the best disinfectant, and informed customers/users help make vendors honest.
You don't need to worry about the lock nerds on youtube, anyway. You need to worry about the guy with the housebrick, and your easily-accessible downstairs window. Worried about your bike? It's the passer-by who just happens to be carrying bolt croppers that you need to worry about, not the locksporter who'd need ten minutes to pick their way in.
@@invisibleoc This isn't a computer that has virus and malware protection software and can have code written for new hackers. They also don't sell beginner hacking kits w step-by-step visuals.
Furthermore when you say key manufacturers can use a site like this to improve their products, then they also need ppl like me to comment on such sites that destabilizes my safety. As well, this site isn't teaching smash-and-grab burglary, but detailed ways to break into any lock along w beginner kit sales.
The only ignorance here is comparing apples to oranges.
Bill was the reason I got into lock sport years ago. Enjoy your life and cherish you family. Thank you for everything you taught me. You'll be missed.
These videos are a complete revelation. Before I started watching them I was completely ignorant about locks, and basically I thought one lock was as good as another - boy, have I had my eyes opened! Thanks, Bill. I really appreciate the trouble you go to when you make these vids.
I totally agree
now you know that basically all locks are worthless to someone with enough desire. Locks merely keep the honest honest and locksmiths employed. Burglars usually just kick the door in, no bumping nor picking needed lol
Its insane. They should make this sort of thing mandatory viewing in school. I mean, its not like they're bothering to teach our children how to _spell_ any more, so the least they can do is teach them useful life information like this...
So now you just bar your door with a heavy plank like they did in the olden days.
Oh my goodness, that "spring loading" the bump key is genius. I had to bump a lock I couldn't pick just last night and was even having a little bit of difficulty bumping it. I eventually got it, but it puts a bit of strain on the hands and fingers having to pull out the key every time. Thank you for this video.
Never in a millions years could I have answered the question "what do castrated goats & lock picking have to do with each other?" And now I can answer that with 100% confidence if ever asked. Friken sweet!
izraul hidashi you could also answer, "a set of bolt cutters makes the job go faster."
🤣😂😂😂
Its a common quiz question in my part of the planet.
izraul hidashi j
اااا
BosnianBill, Thank you for producing these great videos! I am disabled and bored out of my freaking mind. My nephew is a locksmith up in Oregon and he got me a set of picks as a joke (he doesnt think I can pick locks I guess) I have pretty much picked every lock I can find around this place (had a problem with a few but after watching your videos I have gottem much better) I have now ordered a set from Sparrow and got a 39 piece bump key set and a set of jigglers.. I still have problems with my hands most days and cant do anything but on those days I fill it with watching your videos..
That's awesome man. My dad's disabled and out of work too and I always tell him he needs a hobby. He's got a bad back so he can't do anything active, which is what he's done his whole life. I don't know what's wrong with you but I think it's really cool that you're nephew even sent you lockpicks as my cousins can't even take care of themselves (they're degenerates.)
Not sure about where You live and how disabled You are but since You can pick locks with a certain ease You could make a living out of it where I live. Great hobby either way.
You should learn to pick with your mouth, then challenge your Nephew to a lock picking dual next time you see him, preferably in front of his girlfriend.
I love your spirit Tim. So many people wally is self pity. They can learn something from you!
I wouldn't personally recommend picking a lock that you're currently using as you might damage it
Bill, your videos confirm for me what I already knew: locks are only good for keeping honest people honest.
And when you consider just how many dishonest people there are...
I dont lock many of my valuables up, any more. I've adopted a new technique of "keeping it within eyesight" if it really matters to me. 😒
The only lock I've seen pass both this channel and LPLs channel is the Bowley lock with those 2 internal steel cylinders. Resistant to bumping, basically impervious to picking, solid steel construction resists melting, no plastic mechanics... its basically what all locks _would_ be like if people weren't happy with buying crap locks instead.
LOL The bike ad at the end just set me off laughing at work. Everyone came to my office to see what was so funny.
It real funny to me because I'm having the same "discussion" with my wife. ;)
Dear Sir, I would like to express my deepest gratitude for not only your videos but to you ( you're like a mentor that I've never had the chance to meet ). I studied your videos and downloaded a lot of books about lock picking for having a lot of sudden interests in it. I stick to the 2 "Golden Rules". Once my friend need somebody to open the computer lab coz only one person holding the keys but she wasn't there.I am an ordinary English teacher, sir. He turned to me and I opened the wafer padlock with a paper clip and the grill lock with a fluffy dust brush's round edge ( it's a twisted wire handle type ). But all sudden a lot of people looked up to me, even some worry bout my newly unknown shown potential.Just wanna say that you inspire the whole world. Thank You Very Much :)
My friend, YOU, that's right, YOU, make the best instructional videos on all of UA-cam. This was excellence from beginning to end. Clear, concise, complete and fun to watch.
Nice demo. I used to be a locksmith 35 years ago. Pre-bump key.
Bump keys have been around for more than 50 years
Wish you all the best in your retirement. Your videos are always informative and educational.
Bill, thank you and goodnight!! Just seen on lpls that you are retiring, so very best of luck and thanks for all the laughs and knowledge!!
Darn, just used up the last of my goat castrasting rings.
meesterp lol
Hate when that happens. I wonder if they are on amazon
+Andrew Sanford www.ebay.com/itm/Castrating-Bands-Elastrator-Rings-100ct-Green-Donuts-Calves-Goats-Sheep-Lamb-/131678240287?hash=item1ea8a27e1f:g:k30AAOSw1S9Wcb4f
spoofer20 uh oh. I saw a bag of those on my wife's desk
meesterp Well then you better hide your keys
Thanks for everything Bill. I hope your future is full of health and happiness
LOL at that ad in the end. That's a shame, it's a beautiful bike.
😭 a tear shed for a wasted machine, I hope the bike finds a great new home
Hello what's up my people I'm disable but that does not make me do bad things in life,what it does is make me & my mine think a little better like how to work on my car which i personally thank the you tube app. For showing me the good ways of working while Beeing disable I've learned a lot threw this you tube app. And i would like to say Thank you (UA-cam.com) For helping me learne lots of skills and tecnics. That i never new ...yours truly Mr. E doggie dog .
One of my first video I watched of yours. Thank you for your time.
I think it is the best way to open any lock. Thank you very very much. I will try to make it at home.
Bosnian Bill, I just wanted to say thank you for all your great content. You will be missed. Good luck for the future. 🍺
Such a nice looking bike. I'm sure you won't have any issues selling it.
Tell Viktor that two billy goats sacrified to assist you......great video
I haven't tried to bump key anything yet. But now I might.
#lockboss.
holy crap I just made a bump key. just bumped EVERY lock in my house. guess those are also being replaced. again...damn it bill, costing me money by teaching me yet another skill. thanks.wheres that video, bill. still waiting. snow aint that bad.
I'v tried to follow all the instructions in the video but no luck, could you please tell me how to file a bump key.
Why would you make your hose locks all unpickable. One day you'll curse yourself when you lock your keys inside
To Samuel, the lock you are bumping is looking for /or needing the key tip to engage the cam. Next time you bump it open, turn the key and then cut off your rubber washers. press the key in to engage the lock. You did not say what type of lock it is but some profile cylinders use this system. Might be C.E.S. but I'm not sure.
Lmao at the Ad at the end of the video
Bosnianbill, master of intros.
That's a quality lock.
I support this Chanel this Chanel is awesome!
Is it Chanel No.5?
I love your videos. Lock picking is something I have always wanted to learn, but due to the fact that NC has a law stating only licensed locksmiths can own lockpicks, it's put a damper on my fun
toool.us/laws.html says otherwise.
According to them, you can own all the lockpicks you want - you just can't charge someone else for locksmithing services unless you're a licensed locksmith.
"North Carolina does not criminalize possession, but lockpicking demonstrations in that state should always be free so that they never fall within the definition of "locksmith services." Locksmiths must be licensed, and there is a Locksmith Licensing Board."
Used Abracadabra A1 Locksmith today the guy could not have been more helpful if he’d tried. Highly recommended now in my address book.
Very cool Bill. I don't normally bump or rake. I mostly SPP. However, I have been trying to learn how to bump correctly for emergency situations at work. anyway, great video.
My god I bought a lock like this, i'm in UK. I cannot find a single lock that I am able to pick because of the strong curves. I am so glad it's not just me and that you found problems as well. I want bump keys now.
I have a door lock at home that i need to jiggle dramatically as it always sticks. I have a few spare keys. I think I will file off the stop point and add a few sheep tail bands as shown here. It will make it much easier. I won't need to file the rest down to a bump key though. I'll basically just replace the stop point shoulder with the rubber so it springs much easier.
Bill, I just about died laughing when I read your ad with the bike, lol !! ;)
Just found this video and had to laugh at the castration bands you mention. I live in a farming community and that is what I carry for my bumb keys. They work really well and are really cheap (if you can't just grab a handful from a pals farm).
Nice bump demonstration. Also gorgeous bike. I've a ZX-6R myself, probably a little late but for anyone else looking for advice giving your girlfriend occasional rides on the back might help. Start it slow and without filtering too much but that should save your bikes. That said I bought mine with 100 miles so maybe I shouldn't be helping too much.
A very nice example of using the rubbers, very nice video buddy!
Excellent video. I will probably never have to do this myself, but is is exemplary of the 'handmade, tricky, generic-looking tools' this activity requires. I've been known to mill quite a few 'handy little tools' in my bathroom with a dremel, and you can't go wrong with a set of diamond needle files (like sandpaper that never fades), Personally, I think bill would do well to go full-AvE and do a few full-length recordings of him making a custom pick, or grinding out Master 410 cutaway.
There is no need to remove the entire shoulder of the key ...
cutting it back about the thickness of a quarter is sufficient ...
the pins will re-seat and move the key back out to the ready position after striking it .
Pimp ass vid Bill!!!! Good knowledge, shown the correct way!!! I learned this from you about 6 years ago in another video of yours. I really need to send you some 💵..... your knowledge, which has become mine has been more than useful. I’m very grateful brother, ttyl!!
Bill, The Last picture on the video had me rolling with laughter i've been thru that "do whatever the F*** you want" and let me tell you... it means NO not maybe not get it and lets see... it just means NO... lol me and my wife both had a laugh at that one. speaking from experience it was funny to see others do the same thing.
I have done locks for years and only used my pics. Never tried bump Keys before, but after seeing this video I will start playing with them. A Kwikset lock should be a piece of cake. But you won't be able to do that with a medico. LOL
I LOVE your channel! Probably the best on youtube related to lockpicking and related topics.
salamat sa pag share ng collection mo boss godblees po sa channel mo ❤❤❤❤
Again a great video Bill!
I think I'm gonna make some Bump keys my selve, now I know how to do it RIGHT.
Thank you for your great videos, man!!
LOL! That ad at the end is absolutely hilarious. Nice bike.
I know how to make a lock no one will steal from you with. Get a lock like this, then get a master lock case. When they fail to pick it, they don't want to be around for anyone to see they tried.
?
?
@@lucd9080 Masterlocks are horribly easy to pick even for novices.
@@hunt7129 Masterlocks are something a thief hopes to see because they are basically useless locks.
@@CyberianFaux ok ty
Does the bike come with keys? (You might not need a stinkin key but I sure do!)
I left the shoulders on my keys but instead of trying to rap it in and turn it with perfect timing,I slipped an elastic hair tie thru the key "eye"put my fingers thru the 2 loops protruding on eitherside, stretched the elastic over the knob or lock ,put a 90 degree twist in my hand position and put the key into the lock, Now to open it you justpull the key and let it go -like a pinball machine and the lock will be opened in 1 or2 shots because you don't have to time the twisting action, it's done for you. the hair tie is cloth covered and 2" in diameter. I can open my two deadbolt front door locks faster and more quietly than with the house keys.
Thanks, Bill. Is It likely they used the same type of spring for all the pins? If they had used springs of varying springiness, would that have made bumping it significantly more difficult? Thx.
No
I have a question if you would have get a blankie and take it to Menards or something to make a bump key what would be the cut you ask them for
im going to try this on a bike lock that i have lost the keys to that has been wrapped around my frame for the last couple of years.
bolt cutters lol
ONE MORE SKILL TO MY LOCKING HOBBY , i need more practic thanks for that great video.
using the instructions in this video; I walked in to my friend's house after he locked the door on me XD. I think the power has gone to my head...
I did it to my grandma's door and my brother's door. No one I didn't know yet...
If you are coming in mine, you'd better be yelling my name!
Many thanks for all your wonderful work and enjoy your retirement. Cheers from Prague, CZ.
Great video! Thank you! Do you have a video on how to prevent a bump-key, if that's possible at all?
Bill my man, I came upon your channel recently and have learned a lot from your video's. I like how you take the time to explain everything in great detail. The camera quality is great, you make sure it focus's which is a real bonus, you get shots and angles that work really well. I would like to say thank you for all your time and effort. Don't ever let the haters get you down, they are just jealous because you are doing well at what you do. You never see a hater do anything successful on UA-cam or any where else really? I do have one question, I haven't been through all your video's as of "YET", but was wondering if you do safes, or digital locks? I have been picking for some time now, and think I am going to try to master popping safes open. I have had two calls in the last 5 years for this service. I got in both times but the safe was not pretty nor functional after....LOL If you do have videos on this could you steer me in the right direction of them. Thanks once again and play safe!!!!
Great job Bill, do you find that these better tolerance, more precise locks are easier to machine gun bump?
He, neat trick on the lock there! :)
I tried bumkeying a padlock, had some succes, but i didnt have my bumbkey set up like this with the grommets.
I will try this once i have the time and money. :D
Thanks!
Jeff
Jeff you dont have noney to buy a grommet?😂
Hey, what's the difference (other than tools) between bumping and raking? Seems like they're doing the same thing?
awesome very easy to bump, i am learning a lot things watching thees videos, thank you.
@Bosnianbill if i presume well most likely you understand ''nasi'' :D ..svaka ccast na odlicnom videu,i objasnjenju bump key-a..
nego, jesi li prod'o motor :D :D :D.. motor je STRAVAAA dobar!
Pozdrav i LP. good luck in your future videos :D
zdravvoooo
Great vid. LOL at the bike ad! Is that and the castration ring connected?? hehe
That was fast. According to Evva that lock is 100% bump proof and extremely pick resitant. That just shows locks are only to help keep people honest. A $280 lock should be a bit harder. nice explination.
Excellent bump key. Would love to see some tubular SPP action without the use of a Peterson Pro-1.
Hopefully you sell that bike Bill :D
Great Tutorial Bosnian Bill, I am following it and making my first one today.
is this the thieves guild? i wanna join
No, this is the Dark Brotherhood. We don't have cookies, we have secrets.
Secret cookies!!!!
I love cookies
I'm a secret cookie monster
thieves don't waste time learning to pick locks. they just break a window or break down the door
Ok Bos, when you get to the part where you remove the stop at the back of the key, maybe leave a small portion of it so the rubber washer stack can be smaller? It just seems icky to remove the whole thing...
icky?? what the hell do you mean by icky? what about a tool exactly is icky? makes absolutely no sense
love this video....good call on the castrating rings. I just picked up like 100 for under $3! haha
I've seen this movie and movie is the next three days bought me here
I would be bringing that bike up every time she comes home with a new pair of shoes from now on.
Mo man - 100% on point! I like the way you think. 👍
lol cats stole my truck keys and hid them somewhere in the house... this came in so handy today XD
I like your demo. BTW. Did you sell the bike?
Amazing information! I never heard of bump keys before. How does the actual physical action of bumping the the key work to unlock the lock? I am just curious cat.
Each time you hit the bump key, the ramp at each position throws the pins flying upwards. If you turn the key quickly enough you can open the lock before the pins land.
I knew instantly what those castration rings were, just about fell off my chair laughing! Never in a million years expected to see that on a lock channel.
This is best video I've seen, subscribed, liked.
You good man thanks for all your video’s.
LOL. Oh, and I just saw the bike for sale. Very nice!! Hey, in addition to the leathers and helmet, does your man card come included as well? LMAO!! Don't feel bad buddy, I'm in the same boat.
Would love to see you pick or bump an old Medco lock we had on nuclear structures!
Hello, everyone. I tried using bump keys & it didn't work at all. They fit in the lock, they seem to match up with the regular key (the points have the same spacing), but they won't work. Tried using the multi-tool & the screwdriver handle for a hammer.
That type of lock is also used on storm doors.
Jack Reacher jjhfg
hey, these videos are great and informative... just one request... could you also provide a list of pawn shops that might have lax morals when it comes to buying "re-appropriated" goods? 😏
To make a good bump key you need the original one, but what if you've lost the key? Is it still possible to make a bump key from 'nothing'?
I've snapped 2 tension wrenches and 4 picks and 1 take trying to get into a Master lock
LawnTractorBoy a master lock....
Zerobrine /anon it was a high security one
Masterlocks are the easiest to get into, so some thing(s) is/are definitely wrong here:
A.) Look at your equipment. If you're breaking things often, especially tension wrenches, they may be cheap knock-offs that aren't up to the task. Get a beginners set from Sparrows (often advertised by Bill), or at least find a set that has thin tools that won't easily bend or break. Tensioners should come in a few thicknesses though, and won't be as thin as the picking tools.
B.) Look at your technique. Another possibility is that you're putting too much force into the tensioning. Too much tension and you'll jinx the operation because you won't be able to feel the feedback from the lock if you don't bind it up first (i.e. jam it). Let off on the pressure and see if that helps, and maybe be a little gentler with the picking tools too. Also, look at how how you're tensioning it. If the tensioner is twisted in the keyway, it may push to one side rather than provide a nice round torque, and that would cause the lock to bind and you'll pick it all day with no success. Make sure the tensioner twists the cylinder rather than pushes it to one side. Finally, be careful not to overset the pins. Be very careful with your pick as you push against the pins, at least until you get a feel for picking. If you push too hard on the pin it will go up further than you want it too. Easy to fix...simply let off on the tension a little until the pin drops back down.
C.) Look at your lock. Maybe the lock is old and rusty or has grit inside it that will make it difficult to pick accurately. Rust and grit may make the pins stick, so consider giving the lock some good old WD-40 and see if that helps. Also, is it a basic lock, like the #3, or is it a more advanced lock that might (unlikely, but maybe) have something tricky (for beginners) included? Perhaps you happened to pick a rare good Masterlock, or maybe it's a basic one that needs some maintenance.
D.) Look at your key. Does it have at least one really high tooth right next to a really low one? If so, you may be the victim of radical bitting (heights of the pins), which makes it trickier to pick/rake. I _think_ Masterlock creates each key completely randomly, so some have a straightforward bitting while others have somewhat nastier bitting. If you find that you have a lock with radical bitting (as evidenced by the key) never fear, it's still an incredibly low security lock. However, you might not be able to rake it, and patient pin by bin picking may be your only option (as far as keyway tools are concerned). You could of course always try to shim it, jiggle it, or bump it, but I assume your intent is to practice hobbyist lock picking.
I have a Masterlock myself that has given me trouble. It's a #3 lock, so it should be really easy. However, I'm still a beginner at lock picking myself so my skills aren't up to par, plus I have multiple things going against me. 1) The keyway does have a case of radical bitting. The key number is 3602, and the seems to correspond exactly to the teeth on the key, where 0 is the lowest position and 6 is the highest, I thus have to pick from back to front a med set pin, extremely high set pin, an extremely low set pin, and then a very low set pin (in order of position, not order of picking). That makes it very difficult to not overset the first two pins. You just have to be very careful and use a deep hook pick if possible. 2) It is an old lock that is rusty and almost certainly has some sand in it. The third pin, the extremely high set one, is very difficult to pick with too much tension and I usually have to back off on the tension for it. Also, the lock has a high-tensioned cylinder (probably rusty springs), so occasionally I have it picked and don't realize it since I needed to exert more tension. However, I haven't bothered to give it any WD-40 yet...maybe I just like the challenge. 3) My lock picks are junk (sort of). They are essentially survival picks, no longer than my thumb. I got them as part of another tool for their novelty. Since they are so tiny, I have to work them with my fingertips, which is quite uncomfortable, and doesn't provide great feedback. It works though and I haven't broken any yet...for being cheap they are surprisingly strong. I can't _wait_ to eventually buy a lock pick set that is full-size!!! 4) All that said, I have managed to pick the lock multiple times, both with raking and picking. I've never been able to get a really good feel for the lock, due to the disadvantages above, so each time I pick the lock it's somewhat random. A better lock pick set and better skill would help that, but the point is that if I can pick the lock with all those things going against me, then you can do it too. You just have to have patience and understand each problem you face.
Here are the various locks I've tried to open thus far without a proper key, the reason, the method, success/fail, and the scale of security on the lock (0-10):
1) My first lock picking experience: At college I attempted to pick my dorm room lock (with the survival set mentioned above) multiple times because it was a safe lock to practice on. Method: Raking and picking. So far, no success. However, I will revist it later on when I return to college, especially as now I have become better at lock picking. I'd have to see the key again, but I believe it is a six cylinder lock, and commerical grade, so I believe its security is between 5 and 8.
2) At work there was an unused, empty lock box that was missing its keys. I needed to find out if we could use an existing key to open it in case we needed to use the lock box. The key fit, but did not unlock it. With some ingenuity, I decided to try to jiggle the key back and forth, and have since proven many times that the method with that key WORKS!, every time like a charm, and easily too. Method: Jiggling. Security on the lock: 1-2...haven't tried picking it, but is jigglable and is a pretty basic lock. We still haven't used it for anything.
3) Also at work we had a miniature cash drawer that was locked up and someone misplaced the keys to it. We needed to use it at that moment, no time to waste looking for the key (which didn't turn up until a few days later). So, I tried to pick it with a paper clip. SUCCESS in a few seconds. As it turned out, it barely needed any picking, since it only has maybe two pins. Method: Picking--if you can call it that. Security: *-*2.
4) Also at work: Someone locked the electrical panel leading to the thermostat. It was winter but a warm day and sun was streaming through the windows. The thermostat was incorrectly set to heat instead of auto, so it even though it wasn't pumping out any heat, it also wasn't cooling off anything. The sunlight managed to heat one room up to over 90 degrees F. No one had the keys to the electrical panel, so I grabbed a couple of paperclips and started picking it. SUCCESS in about a minute. Similar to #3, I soon discovered I really only had to push the front pins (one on the top, one on the bottom) out of the way and then turn the lock. Fixed the thermostat and everyone was happy. I have since repeated the procedure several times when necessary, so complete success as far as picking is concerned. Security: *-*1.
5) The Masterlock mentioned before. It's an old lock my dad gave me, and I use it mostly for lockpicking practice. First attempts were unsuccessful, since this was actually the second lock I attempted to pick after my dorm room door. Sometime after #3 and #4, I decided to try it again, and finally got my first open on it. Have since picked it many times, sometimes successfully and sometimes not. Success rate: Kind of random. Method: Racking and picking. Security: 3.
6) Also at work we have a small cheap lock that fastens a chain together, mainly to make it child proof and slightly deterrent. It was a bigger hassle for us to use the chain, so we finally retired it. Before doing so, someone who was interested in my lock pick set asked if I could pick the lock. I said, yes, or at least I thought so. So I tried, a little nervous that it wouldn't open for me. It did though in about 30 seconds. SUCCESS. Plus, it was fun watching everyone's eyes pop out when it opened so fast. Method: Picking (initial raking didn't yield anything). Only picked it once, but it was obviously a cheap lock, not very many pins. Security: 1.
So, I haven't picked anything harder than what I think might be a 3 so far. Not sure if I could pick anything harder, but would be willing to try given a good, legal reason to do so or some free time on the locks at home. Would like to get good at lock picking for government work. All that said, I'm just an amateur, but experience has taught me a few lessons that may prove helpful to you in A-D. Sorry for the long essay, but hopeful you find it helpful/encouraging/interesting.
Benjamin Hackett it's not the average master lock. It is a special kind of lock that are supposed to be 'antipick' but they aren't imposible. I got into it in the end. I use quality stuff.
Okay, great! Glad you got into it. You scared me a little though when you just said you were breaking tools on just "a" Masterlock.
about the bump key... I got the idea of the depth of the grooves but you had the original key so you knew you needed 5 grooves. If you did not have it, how would you make one?
I am not challenging you anyway it's a matter of understanding.
I help people that need to open lock due to lost keys and just to give you my background; my first padlock was opened by accident. I was bored and I found a padlock. I also had a paper clip and just playing with I started understanding the mechanism of it by feel.
Most combination locks I use the feel of the pins. 😇
+Gilvam Carvalho the length of the key can reach the 6 pin .if you look at the edge that hits the pin to bump it the tip will be 6.on some locks anyway, all brands are spaced different so make one of each .
+Gilvam Carvalho you can use a usable key from a different lock (but same type) that fits into the lock you want to bump.
Any idea if you could cut keys with a milling machine?
Don't have a key cutter, but I do have a 3/4 size Bridgeport (actually a clone of a clausing) in the shop.... Thinking of rotating the head to a 45 degree angle so the corner of an endmill would cut the notch. Either that or get a replacement cutter for a key cutting machine and make an arbor for it....
My thinking is that with setting up a way to hold the key in a repeatable position, I could figure out a chart that translates cut numbers into thousandths that I can dial in on the feed cranks. Have the key vertical, and then just start at the top, set the depth of cut, do the pass. Then raise the knee up to the next position, reset the depth, and make the cut.
If I can figure it out and make it work, I might do a video on code cutting keys on a milling machine...
Tried making my first bump key and ended up with key stuck inside of lock and couldn't pull it out. I'm guessing that I filed my grooves down too deep. Was wondering if that's what I did wrong?
Either too deep, or the angles too steep.
Thank you! I'm going to play around with this, so I'm thankful for this advice. I won't try my front door until I'm reasonably sure I know what I'm doing. 👍
That actually looks like fun
Nice demo if only my 1st made bump key looked that yours Lol
Question: have you tried using a pick made of spring steel?
I feel like a spring steel pick wouldn't break inside that lock
Good job. But how would u make that bump key if you didn't have the original to copy?
dont forget the donut
loved the video love that bike too has it already been sold?
Question from a newbie re filing: To me it looks like the file is too big for filing the pin positions that are close together. In the process of filing one grove wouldn't you take out the adjacent pin? TIA and thanks for the interesting vids.
Doesn't matter, since you're filing all of them to the lowest position.
This is amazing and definitely not my thing! I'm trying to pick a lock on an old cedar chest that we obviously lost the key.
It looks easy in the videos but I got the picks from amazon and tried it myself and its really REALLY HARD
Round rubber washer grind back half a click and roll ring over key till it hits key stop . Only need 1
Exellant making of the bump key,you are a pain in Eva or any lock company,you are just too experiancbed Bill,i love all your videos and a subscbriber for life,cbheers Mal in BC.
I wish he would have shown at least SOME of the filing. This doesn't really show how to *make* a bump key at all. Just what one looks likes.
Like what you say at the end …. “That’s too easy “