Відео

For everyone who tried this, and it didn’t work - in my case downgrading Literadio’s firmware from 2.1 to 1.2 worked.

Between the Aquila16 and the Cetus X, which one has more potential for better upgrades? I’d like to get my first fpv drone and eventually incorporate an insta360 3s hard mounted.

Nice video! My quad FC came presoldered with a yellow signal wire on the underside of the FC near the bootloader button. Any idea what this might be? It came as a plug with a battery voltage and GND.

Hello. I'm interested in the tinygo and the aquila 16. How well this aged? Can you make a comparison video about this drons? :)

Oh my lord thnk you so much for posting this when you said what was that I have that same problem and it annoys me so much

Also I think the LEDs might interfere with the filming because of the bright light

Hi!... Where is the location of the micro SD card for 4K recording?.. thanks

If I cut off the protective frame, replace 4 larger wings. So can Aquila 16 carry DJi actione on its back?

Thanks for the great details.

@onemannunarmed Do u install the Firmware Update for the AQ16 ? It cames on the offizial Website 2 month ago

I'm from Germany and came across your video. You're the only UA-camr who draws attention to these problems! Everyone else is afraid to say something negative. The Aquilla 16 is unflyable outside. It vibrates and shakes like crazy. It's not fun, it's annoying... The drone is not a whoop drone... you can only fly straight with it in normal mode.

7:14 thats why the drone is sh1t... flying outdoor is pain in the a..ss... vibrations from hell

Can you send me a link too expressLRS receiver and how to put it on

How much is the runcam affecting the flight time ?

Hey man, great video. Will those goggles work with radiomaster controller and nazgul drone?

It's a 5 inch frame why does it only have 12x12 motor holes?

I ordered the truck with remote and the camera separately for $20. Since i already have fpv goggles.

Mate your a god send! Great video, and subscribed :)

13:56 Wow a hundred watts. How do you not die. Im impressed

This is the best review of this drone I've seen. Thanks.

can you give a link to the motors and props?

What are the two holes on the side of plus and minus pads? are they connected to the battery pads for a condensator?

Hi sir i am getting flickering issue on the same vrx ,as brightness or colour on fpv feed changes display begins to flicker.and i am also unable to change channel manually. If i press tha button for channel change i get Solid bands and i cant scroll through them

😍😍😍🥰🥰🥰Korea 대한민국

Amazing thx for the video ❤

How about with insta go?

Great

I believe it might be possible to put an AIO camera of better quality on there where the stock one is.

Been 7 months since your review, do you know if bet a flight modified anything to get props out of view or make something that lets you use ND filters?

New to your channel, awesome job with video..

I posted this to one of your other videos but I'll post it here too as it might be more relevant to this video: Have you ever plugged the radio from the Aquila 16 kit into the betafpv configurator? If not, could I ask a favor for you to plug it in and let me know how the channels are setup for the Aquila 16? Is it using the stock setup the same as the standalone radio that is available? Thanks very much! I'm actually planning to try it with a Radiomaster Pocket Radio with Ranger ELRS module. I need to know what channel is mapped to each of the switches. If I can't get that to work, I may just pick up the Literadio that you are working with here, if I feel confident that it will work as the one included with the kit. I know it is a beginner setup, and I'm not a beginner, but I own an Avata, and I liked the "mini Avata" aspects of this drone. Thought it might be fun to take along on trips, etc.

Have you ever plugged the radio from the Aquila 16 kit into the configurator? If not, could I ask a favor for you to plug it in and let me know how the channels are setup for the Aquila 16? Is it using the stock setup the same as the standalone radio that you are setting up in this video? Thanks very much! I'm actually planning to try it with a Radiomaster Pocket Radio with Ranger ELRS module. I need to know what channel is mapped to each of the switches. If I can't get that to work, I may just pick up the Literadio that you are working with here, if I feel confident that it will work as the one included with the kit.

Betafpv says the following: With a 1100mAh battery, it offers a flight time of 8 minutes and a maximum flight distance of 200 meters. For those seeking advanced flight modes like freestyle or racing, opting for a 650 battery is recommended. The stock battery is heavy, and 15C I believe. I'd like to see what it can do with the 650mah. With the 1100 at 15C, I think it is just starving for power in manual mode.

Will it discharge without having to charge another device?

I Love the runcam thumb o got one on all my sub 3inchers just cause

I just got one of those fpv RC cars and mine didn't come with a controller could I get another kind and use it on it or what the app on the phone works too?

i am getting one too in about a month i bought one from marketplace with 14 batteries and 2 extra chargers for 210 euros a friend of mine will look at is to see if it still flies good and hes recieved it and he says it looks good so im exited to do my first flight!

Nice! I like the image quality!!!! Will try here with mine. TX

Giving them what they need...small quads are taking the market...I got 4...lol...good job One Man.... nice little hook up..

Thank you for your detailed explanation, really nice drone, I have got it to start fpv, but i was wondering, it is possible change the commands of the controller? because i didn't make it.. thanks in advance..

With the DJI controller and multiple drones, will the binding process need to be done each time I want to fly a different drone?

Okay I have found through betafpv support ( That’s a job) I ordered the wrong module 915 MHz so it doesn’t work with a cetus x ELRS drone. I’ll be back when I get the right module delivered. I’m not good with technical issues but I’m a patient man. You learn that with age lol keep up the good work dude

Any chance you might make a video on how to do the firmware?

I'm on my second Moonlight kit - my first Walksnail installs, one quad, one plane. Both run hotter than Hades in Summer, during a brush fire. They'll overheat in standby mode, disarmed on a 4s, while waiting for GPS lock. To say I'm unhappy about this is an understatement. It's an absolute travesty. But, the positives are great footage, lovely, crisp video and OSD fonts in my Goggles X (thankfully I have the 1.1 version of those, with the fatty heatsink), and easy transitioning of video to my PC (though sadly I haven't grabbed anything worth posting yet). I appreciate your in depth coverage, OMU!

Hola buenas noches. Acabo de comprar este dron el cual de primero funcionaba bien pero ya no al prenderlo y enlasar la emisora se enlasar bien pero al armar motores parpadea de varios colores sabrán la falla? Y solo giran bien dos motores

Thank god. I had the filters in my cart now I can change them for vertical ones

FYI the Jumper website is at best WRONG about this radio supporting TBS CRSF, and 150mw. This radio's module bay can only handle 500mw due to it's single 18650 cell. So if you use a CRSF nano set to auto, it will failsafe when the radio flips from 500mw to 1w because the radio just shuts off. Then there's the 150w that it will never do because the protocol used does not support 150w nor will it ever, so the max power output is 100mw. People are going to say you can fly for ever on 100mw but that defeats the whole purpose of the faster refresh rates. This radio is nicely suited for the simulator and whooping, but for outdoor it SUCKS.

If you use dji googles do you have to buy the dji O3 or is it already in the drone?

You try 2.7 120 shut

Annoying music