U guys have an L5P duramax. Tuning for that truck is around 10 grand. If ur going to delete the truck you have to have the tuning otherwise the truck will put itself in limp mode so u can’t hurt it. First thing I would do is get a fass lift pump like a 165 gallon per hour pump because that trucks injection pump is a cp4 it’s not as reliable as a cp3. Cp4’s have ceramics inside the pump that fail and go straight through ur motor essentially destroying it. The lift pump almost eliminates this problem and I’ll get better fuel economy. Second mod should be a 5” exhaust that’s stainless steel. Third mod should be a nice intake. Forth mod should be a super nice BDS lift kit. They literally make the best lift kits on the market that are designed around the truck and use almost all of the original suspension parts with very little modifications. If u can make a deal or get sponsored for a kelderman air ride kit u could go that route but those kits are super expensive but they are worth it if ur lookin for it to ride like a Cadillac. Good luck with the build guys. I enjoy watching ur channel.
I agree with Andrew, get the truck up and running and I believe you will be surprised on how much power it has in stock form and more reliable. then do minor mods.
@@jeffreymiller7847 how and where? EVERYONE on youtube is spending thousands and thousands to fully delete and tune these. Everyones telling me I need a modified ecm which is around 2k before tuning.
The “def fluid” is otherwise known as “ad blue” ..... has nothing to do with the oil or even the engine as such. It just mists a fine spray into the exhaust to break down the carbon particulates and make the emissions much cleaner.
David Scheiber, knows what he’s talking about. The egr system does recirculate the exhaust, just like they said. The def is part of the same emissions system.
I have an older 2002 duramax with the Allison. It’s a great truck and pulls anything. Mine has 135, 000 miles. One thing you need to know about the duramax engine. It’s injectors can have issues if you don’t get a fuel polisher or filter. I did not get one until my injectors went out. Everything I found about the duramax said the injectors go in them. My cost to replace injectors was about 6k. Mine went at 100k. I got a FASS fuel and water filter which is supposed to remove water, polish fuel and remove air. The other thing it does is improve fuel rail pressures. If you guys are gonna mod and tune the truck you have to do this. Also if your gonna really push the fuel pressure to get her really tuned, you want to check out the auxiliary fuels draw instead of the one that comes with the kit. Tell FASS that a customer sent you. Who knows I might get a credit or something. If they ask who do they can give a credit I can hook up and send you my name through private email. If you tell them who you are and about your channel they will probably give it to you for free if you promote them. I have a plug in tune and engine monitoring system too I can share with you. It will let you check your injectors and also have engine tunes you can add in. Let me know if you need more info.
R they got that truck about a year ago sometime in February, it was in a side swipe collision, they rebuilt it and then sold it to a relative for money for more builds
I think he meant the EGR valve but yeah all that shit is so unnecessary. You end up burning so much fuel cleaning your filter out it doesn't even help. Plus you get a boost when you take that shit off lol
@@Agent00J Not to mention stiff federal fines if you are caught deleting it.....definitely would not be advertising plans to delete the system on UA-cam.
Now you need a parking garage for all of your cars! And PLEASE for the love of god pave that driveway!!! BTW Love your content keep up the good work, you need a tv show.
Tom Pick yeah they need a better driveway for the delivery guys, they have to unload crates and pallets and pull them all the way to the shop and I bet that’s not easy for them!
First off...thoroughly enjoying the channel! You guys always make me smile. As to the DEF (diesel emissions fluid), it is injected into the exhaust stream (does NOT go thru the engine) in order to reduce nitrous oxide emissions via a chemical reaction with the exhaust gases. The delete will involve reprogramming the ECM, among other things. A lot of folks are doing this with heavy trucks as well. Best to you and yours...;-)
Yeah, those high end Denali's are basically the same components inside and out as an Escalade!!! Both GM... You guys are going to have the most luxurious shop truck ever!!! Haaaa
The tailgate scratch is a easy repair. This is a good opportunity for you guys to do some minor bodywork repair. V-Tune probably will let you borrow the tools to pull the metal flush, that can be a whole episode.
Yeah totally, I would have just submitted a complaint without names or any request for compensation. Essentially just telling the business, hey, some one messed up. So they can show the employees that they should be more careful. I'd watch an episode on that for for sure! I love seeing these unique, skilled people, tools and machinery that make that "magic" happen.
@@andrewp.1873 Yeah, there was no proof it was the driver with the bad attitude. One of the other lift drivers could have smacked it when getting another vehicle days prior to that. Just a generic complaint to let them know there was an issue is how I'd handle it as well.
Be sure to add an exhaust temp gauge! If you put any type of different exhaust or install any type tuner to this truck...MAKE SURE you watch the exhaust temperature. The engines will self destruct and melt! Great Videos, Great content! Good luck!
I drive a 2019 Chevy just like that but it's the ltz package. Yall are gonna love that truck when its done..they ride like a caddy and there actually pretty dang fast,even with a trailer. Good score you guys
Love the channel! But DEF fluid is there for a reason. It's designed to keep you alive and reduce the NOx emissions which are inherit to diesel engines. When you delete DEF and roll coal, you are polluting the air we breathe. Please don't take this the wrong way. I love you guys and your channel. I think what y'all do is awesome. Keep it up!
@@how7783 Sorry not sorry, human health and the air we breathe is more important than a vehicle's health. What's the point in having a truck last forever if you get a disease from the air that is being polluted by the truck.
You probably can but there's not much profit to be made for the average person. Maybe even a loss if flipped. These two never lose money since they draw a large income from ads, sponsors, merchandise and patreon. They also have connections like Vtuned who do frame work for them.
I would disagree with you everybody starts somewhere If you don't get hurt you can't learn I know from my own experience and I'm doing rebuilds just by myself i currently replacing the cab and my Ford F350
Guys, great job in all videos, always a relax time to what your builds.... About the DEF, I guess you can delete it, but there is nothing connected with engine on this, the system is spraying Adblue on the exhaust fumes for lower emissions.... Keep up the good job... Greatings from Portugal..
James Liles trust me there is ways to get passed it, there are trucks in California that are fully deleted and California is like the strictest state on emissions
Two brilliant voices and one mind , they're always finishing each others sentences, and they seem to be of the same mind. Obviously identical twins, and just brilliant. They're a real trip to watch, very entertaining.
I have had all 3 brands (Ford/Ram/GMC) all diesels. Hands down Duramax has been the best ! 430k and still running strong ! Ready to get the new body style.
In the truck bed, that's a combination gooseneck and 5th wheel setup. You just need the 5th wheel attachment and the gooseneck ball that goes with it. Nice setup.
My daddy own a salvage yard!! And I definitely believe before going to the dealership, you should always go to the savage yard 1st!!! Signing off, from INDIANAPOLIS, INDIANA. GO COLTS💞 SO HAPPY FOR YOU BOTH!!
At 0:30 LOL i was just on Rossville Blvd this morning. Im sure ill see yall soon always running into yall lol. its cool to live in the same town as one of my favorite youtube channels.
Love the vids GOONZSQUAD. From watching this video, looks like you will need frame work. When you are showing the damage @8:44 I can see the frame rail wrinkled behind the control arms right where the factory frame sticker is. Hope all goes well with the new build. Keep up the good work.
even with body on frame that area shows up at fender and hood if its bad... radiator support and door gap. Very tight trucks believe it or not..even back 30 years or more. Can't get away with much.. the frame owns it.
not the junkyard dog I was thinking of but you are on te right path and on the right side of the pond! I bet your dad is jealous & proud at the same time lol
PABLO ESCOBAR Ford Guys Checked in the chat*** ***Ford guys left the chat 😂 Can’t lie that Denali looks nice.. But I’m still gonna stick with my fords.
PABLO ESCOBAR yea but tbh that comes with all newer trucks and cars. The whole Chevy dodge ford debate is irrelevant today, it’s just preference. I still have a 97 ranger with 323k miles. Original engine and tranny.. still ticking like a Swiss watch. I love my 2017 f150, but will probably trade up to the tremor package f250.
Yes we had the option to give back the truck for a refund but I was like nah we’ll let this one slide. I’m sure they get away with stuff like that all the time
Id be pissed about that tailgate. The 80-90k finance is probably with the guys trade. He probably had 20k negative equity that why is jumped the price. Most of the time these truck sell for 10k under msrp with rebates and stuff.
TheCamaro5 its clearly not from the forks. that's one hell of an angle. probably the previous owner hit it with something while loading, but those forks would have to be bent to do that. also, you can clearly see in the pics that it was dented. the goonz just didn't look super close. always look in person, don't judge be pictures.
being watching b for build, samcrac and others while waiting for your new vid but man...you guys are truly the real deal in my book! no wonder why 1.3M subscribers. You are crushing it!
Christopher Coleman I doubt it has actual “jake brakes” like semi trucks. Semi truck engine have what’s called a jake brake. If u saw them u would understand. They are some serious parts in the head on top of the valves and injectors that open and release compression prior to full detonation.
That's a sweet truck. I like the stock grill and the stock wheels. I would fix the damage, and do the performance modifications, and keep the stock exterior appearance.
rough country lift?wrap?new wheels?new tires?off road bumpers? LED's? def delete kit? 5 inch exhaust straight piped? folding side steps? weather tech floor liners? bed liner? there is so much you can do to a truck fellers let the real fun begin!!!
Why. dont feel bad, they have the cash to do these projects and found a nitch here on youtube. Feel lucky that they do the work and share it with us. FeelGood
OOOOOOOMG!!!!! Thee sickest truck there is! I have the MiniMe to that but would be in heaven to have that truck! Delete Delete, Tires & Wheels & tune. Done!!!
@@syedazmiharoon7263 there wasn't. They didn't give you guys the truth. Simple as that. Not loader damage, not damage on purpose, and there was not negative attitude. Like I said, they are massively over exaggerating the interaction.
Honestly, I feel like the general level of intelligence amongst truck owners is cumulatively equal to that of one slightly educated teenager. Buy your truck, maintain it, and use it like a tool. Brand wars between 40 year old men is the definition of pathetic.
Truck mods that you Definitely want. -EFI 5 dps tune -def, EGR-DPF -5 inch straight pipes -cold air intake -rear airbags for better towing -after market front and rear bumper -if the gear ratio isn't 4-10 than you should prob get that for maximum towin -3 inch intercooler pipe -68mm turbo would sound amazing There prob more but tbh I can't think rn lol
Too bad about the "new" damage.....I guess the guy was jealous because you guys do such an awesome job of refurbishing the vehicles you buy! As long as you make these fantastic videos, I am going to be watching. Ya'll are good at what you do and you will go places in the future!
If it’s going to be a shop truck that they use to get parts and tow then a lift is pretty impractical. Don’t get me wrong I love lifted trucks but what they plan on using it for it makes more sense to keep it stock height
Definitely. I have a F-150 Lariat and has everything that Denali does, but my moonroof takes up the entire ceiling of my truck. Not to mention twin turbskies (upgraded mine to the Ford Performance high output)
Yep, Tail Gates are expensive to replace.....definitely need to inform the office folks. That Denali HD Limited.....if it's not, it's close to "top of the line". I'm not that up on GM cuz I'm a Ford guy. Great Video!
Shaun Clarke no doubt about that at all, but the mileage tho at 39 miles then after he drove it home it still had less than 900. Hopefully he keeps it for a new shop truck
With the Duramax motor I recommend going with EFI Live for the tuning. Works amazingly and really wakes the truck up! Not to mention the amazing exhaust note coming with a 4-5 inch straight pipe🤤
I just drove that route to Nashville last week. Being a resident of the Communist Republic of California, I can't believe how green TN is. Loved being there and loved visiting Jasper Highlands!! My family will be fleeing CA and will be a resident there soon!! Oh, and I will never buy a new truck again!! Pick one up used and a couple years old and you basically get all the options and the diesel for free!!!
This just made my day been waiting for a new truck build!!!!
It’s called a yxz
@@michaelgonzalez2049 it km is 54000 miles
oggy oggy what?
@@michaelgonzalez2049 Sounds like you got a hard-on for Alex.
You should really file a complaint about that new damage.
Fact!! Saves us money to fix a damage that wouldn't cost us to get a brand new tailgate
Yeah kinda made me question their thinking. Let someone wrong you 2500 like that...🤯
Filling a complaint or getting anything extra out of copart is like pi$$ing in the wind. But on a good note nice buy
lol read your comment before watching the video and thought you were talking about the front end damage
@@dustin4866 fact
U guys have an L5P duramax. Tuning for that truck is around 10 grand. If ur going to delete the truck you have to have the tuning otherwise the truck will put itself in limp mode so u can’t hurt it. First thing I would do is get a fass lift pump like a 165 gallon per hour pump because that trucks injection pump is a cp4 it’s not as reliable as a cp3. Cp4’s have ceramics inside the pump that fail and go straight through ur motor essentially destroying it. The lift pump almost eliminates this problem and I’ll get better fuel economy. Second mod should be a 5” exhaust that’s stainless steel. Third mod should be a nice intake. Forth mod should be a super nice BDS lift kit. They literally make the best lift kits on the market that are designed around the truck and use almost all of the original suspension parts with very little modifications. If u can make a deal or get sponsored for a kelderman air ride kit u could go that route but those kits are super expensive but they are worth it if ur lookin for it to ride like a Cadillac. Good luck with the build guys. I enjoy watching ur channel.
Got mine done for around $5500. EFI live and Fass Fuel Pump
Excellent comment.. 👍
I agree with Andrew, get the truck up and running and I believe you will be surprised on how much power it has in stock form and more reliable. then do minor mods.
@@jeffreymiller7847 5 grand are the exhaust pipes polished and does it come with an Engine Management,
@@jeffreymiller7847 how and where? EVERYONE on youtube is spending thousands and thousands to fully delete and tune these. Everyones telling me I need a modified ecm which is around 2k before tuning.
The way y’all handled that dude messing up the truck is so badass! Honestly y’all are cut with super good quilt keep it up
What was badass about it?
Did you complaint in front office or not? I am reallyyyyy curious!
they said inside the car that things happens so just let that go, they were not mad at all after
They should've.
I'd be so pissed off....
Me too. I wanna know. I'd be pissed!
I don't think they did, but they definitely should have, and they would have gotten the price reduced, since this damage was not on the pictures.
The “def fluid” is otherwise known as “ad blue” ..... has nothing to do with the oil or even the engine as such. It just mists a fine spray into the exhaust to break down the carbon particulates and make the emissions much cleaner.
Made with pure liberal tears from when they see the black smoke 🤣
MrR6pilot I think what they're thinking else is the exhaust gas recirculation system (EGR)
It still robs power and fuel mileage
David Scheiber, knows what he’s talking about. The egr system does recirculate the exhaust, just like they said. The def is part of the same emissions system.
Typical Americans deleting the dpf to polute more..
Finally got another truck and it’s a beast!
I have an older 2002 duramax with the Allison. It’s a great truck and pulls anything. Mine has 135, 000 miles. One thing you need to know about the duramax engine. It’s injectors can have issues if you don’t get a fuel polisher or filter. I did not get one until my injectors went out. Everything I found about the duramax said the injectors go in them. My cost to replace injectors was about 6k. Mine went at 100k. I got a FASS fuel and water filter which is supposed to remove water, polish fuel and remove air. The other thing it does is improve fuel rail pressures. If you guys are gonna mod and tune the truck you have to do this. Also if your gonna really push the fuel pressure to get her really tuned, you want to check out the auxiliary fuels draw instead of the one that comes with the kit. Tell FASS that a customer sent you. Who knows I might get a credit or something. If they ask who do they can give a credit I can hook up and send you my name through private email. If you tell them who you are and about your channel they will probably give it to you for free if you promote them. I have a plug in tune and engine monitoring system too I can share with you. It will let you check your injectors and also have engine tunes you can add in. Let me know if you need more info.
Uses built truck to go pick up truck to build to pick up other builds. Goonzquad logic. I’m loving it
jonathan larios did you even watch the first 30 seconds. They are borrowing that truck and their tired of it
That used to be their truck and then they sold it, they fixed up that truck
@@richardbelman7155 obviously you're not an og fan. They built that truck months ago and sold it to a relative
R they got that truck about a year ago sometime in February, it was in a side swipe collision, they rebuilt it and then sold it to a relative for money for more builds
DEF does not affect the oil. Its injected into the coverter for emmissions only.
True. Most trucks dont even work without the AdBlue. It'll go into limpmode.
To add to that; DEF delete kits aren't street legal in any state... So be careful guys.
I think he meant the EGR valve but yeah all that shit is so unnecessary. You end up burning so much fuel cleaning your filter out it doesn't even help. Plus you get a boost when you take that shit off lol
@@Agent00J This has nothing to do with DEF deletion.
A different thing altogether.
@@Agent00J Not to mention stiff federal fines if you are caught deleting it.....definitely would not be advertising plans to delete the system on UA-cam.
Now you need a parking garage for all of your cars! And PLEASE for the love of god pave that driveway!!! BTW Love your content keep up the good work, you need a tv show.
Tom Pick yeah they need a better driveway for the delivery guys, they have to unload crates and pallets and pull them all the way to the shop and I bet that’s not easy for them!
They said in there last video that there getting there lot paved, shit takes time!
First off...thoroughly enjoying the channel! You guys always make me smile. As to the DEF (diesel emissions fluid), it is injected into the exhaust stream (does NOT go thru the engine) in order to reduce nitrous oxide emissions via a chemical reaction with the exhaust gases.
The delete will involve reprogramming the ECM, among other things. A lot of folks are doing this with heavy trucks as well. Best to you and yours...;-)
Yeah, those high end Denali's are basically the same components inside and out as an Escalade!!! Both GM... You guys are going to have the most luxurious shop truck ever!!! Haaaa
DEF/DPF/DOC is the after treatment system. It makes a chemical reaction with the ammonia of the DEF and the actual sooth/exhaust to reduce emissions.
It's also made from horse piss
Muricans be like "Yeah we don't need that."
@@xEndgameRA Muricans also "lets sue VW for there diesel cheating"! =)
Against the law to delete that? If you ever want to sell it to another emissions state that will be a problem if deleted...
They better keep it
The tailgate scratch is a easy repair. This is a good opportunity for you guys to do some minor bodywork repair. V-Tune probably will let you borrow the tools to pull the metal flush, that can be a whole episode.
Exactly what i was thinking. Why buy a new one for $2500 when you can hammer it out. They probably need to respray it anyway
love that i will watch for sure
and it's not a critical part, just cosmetic, so go for it.
Yeah totally, I would have just submitted a complaint without names or any request for compensation. Essentially just telling the business, hey, some one messed up. So they can show the employees that they should be more careful. I'd watch an episode on that for for sure! I love seeing these unique, skilled people, tools and machinery that make that "magic" happen.
@@andrewp.1873 Yeah, there was no proof it was the driver with the bad attitude. One of the other lift drivers could have smacked it when getting another vehicle days prior to that. Just a generic complaint to let them know there was an issue is how I'd handle it as well.
Be sure to add an exhaust temp gauge! If you put any type of different exhaust or install any type tuner to this truck...MAKE SURE you watch the exhaust temperature. The engines will self destruct and melt!
Great Videos, Great content! Good luck!
I’m still waiting for them to pave the driveway 😂👍🏼 good work guys
Me too!
Me 3 😂
Yeah full rebuild driveway
Yup
me 4
I drive a 2019 Chevy just like that but it's the ltz package. Yall are gonna love that truck when its done..they ride like a caddy and there actually pretty dang fast,even with a trailer. Good score you guys
They are smooth
They’re the same as a Caddy.
Saw Dad in the grille reflection....admiring and fully proud of you guys. How's his build coming along?
That's right I almost forgot what vehicle where his folks fixing up, a Nissan Rogue ?
@@bitemyshinnymetalass1569 it's been completed a while now, they showed it months back
Are they brothers?
@@bitemyshinnymetalass1569 Saw someone mention the dad works at the Nissan factory in town. He probably proud his kids made it big!
“I don’t know what’s it called but we gonna have to replace it” 😆😆
Joshua
Love the channel! But DEF fluid is there for a reason. It's designed to keep you alive and reduce the NOx emissions which are inherit to diesel engines. When you delete DEF and roll coal, you are polluting the air we breathe. Please don't take this the wrong way. I love you guys and your channel. I think what y'all do is awesome. Keep it up!
Joe Bedell yea, but the def is killing trees and vegetation road side.
I think you should do more research of what chemicals come out during regen def is not good for truck nor is the egr
@@how7783 Sorry not sorry, human health and the air we breathe is more important than a vehicle's health. What's the point in having a truck last forever if you get a disease from the air that is being polluted by the truck.
I'm not first
I'm not last
But when goonzquad uploads
I click fast
Thanks
This is UA-cam comments section gold right here
Give this guy a Beer
Give this guy 🌕 shine
Y’all reaction on the interior is exact the same reaction I get when first go looked for my Denali. I’m so happy you guys got one!
I watched all goonzquad videos I think I can rebuild a car now.
TeleWock Lol what about labor
You probably can but there's not much profit to be made for the average person. Maybe even a loss if flipped. These two never lose money since they draw a large income from ads, sponsors, merchandise and patreon. They also have connections like Vtuned who do frame work for them.
I would disagree with you everybody starts somewhere If you don't get hurt you can't learn I know from my own experience and I'm doing rebuilds just by myself i currently replacing the cab and my Ford F350
I have done 2 got my 3rd on the way now. As long as you got the patience and skill, or at least willing to try you can make it happen.
Also my purchases have been for personal use. Nice to buy a $45k vehicle for $13500 and only be
THIS IS FIRST TIME, THEY BROUGHT SOMETHING WITH BOTH HEADLIGHTS, THAN ONE HEADLIGHT!!!!!
Kevin Miles 350z
You right, my bad!!
Guys, great job in all videos, always a relax time to what your builds.... About the DEF, I guess you can delete it, but there is nothing connected with engine on this, the system is spraying Adblue on the exhaust fumes for lower emissions.... Keep up the good job... Greatings from Portugal..
They want to roll coal. DELETE!!
Is the "adblue" stuff something you have to replenish? How much does the truck use?
@@sickstuff7624 global warming
YAYY! *TRUCK BUILD!* Off to the junk yard just like when you guys were workin on the jeeps, back to the basics!
How about some SALVAGE PARTS in the build like the rest of us po folk?
yeah I haven't watched since they started with the super cars.
you guys have the best truck channel.
he might be a fan but always remeber
"jealousy is always a factor"
people always hate on others that are doing more and succeeding
not me so proud of theses guys killing it and i know there dad has to be too
True story, screw that man. Make the best of this truck, I like it already 👍greetz from the Netherlands (Holland) 💪🏼
So true
Finally a truck build. I've been waiting for this for a long time. I can't wait to see what you do with this.
Be careful if you delete the DEF system. Some states require it in order to pass the state inspection.
Maybe just leave the tube so it looks like it's still there :)
Jacob Cooper you can’t leave the def tube with out it being part of the exhaust In a lot of county’s you don’t have to get your truck checked
James Liles trust me there is ways to get passed it, there are trucks in California that are fully deleted and California is like the strictest state on emissions
I’m sure they know that lol but I think they live in TN and we don’t have state inspections.
@@is300ev2 We don't either in Arkansas (NO STATE INSPECTIONS)
You guys are great!! You show EVERY video that it costs nothing to have a great attitude. 👍👊
Waller-ed out! Best description of the bummed out front suspension.
The guy was probably mad you bought the truck of his dreams.......
He was the other bidder...
Nope, I'm just really freaking gay
I don't think this is the channel for homophobia.
Hey goonzquad I work for a GM dealer if u need help on lower prices let me know
Yo I need a drive shaft assembly for a 2019 Denali
@@andresescalante770 u got a vin ?
@@michaelgonzalez2049 does he have a channel ?
Andres Escalante u got a vin
Michael Gonzalez probably they wanted a more luxurious tow rig. That’s why they got the GMC
Two brilliant voices and one mind , they're always finishing each others sentences, and they seem to be of the same mind. Obviously identical twins, and just brilliant. They're a real trip to watch, very entertaining.
I have had all 3 brands (Ford/Ram/GMC) all diesels. Hands down Duramax has been the best ! 430k and still running strong ! Ready to get the new body style.
Toyota can run forever buy toyota
Hell BuL Thats so true. Thats why Toyota does not have a serviceable Department. Oh wait, they do!
MAN IM PROUD OF YOU GUYS YALL DESERVE EVERY BIT OF WHAT YOU'VE
ACHIEVED!!!!!
In the truck bed, that's a combination gooseneck and 5th wheel setup. You just need the 5th wheel attachment and the gooseneck ball that goes with it. Nice setup.
My daddy own a salvage yard!! And I definitely believe before going to the dealership, you should always go to the savage yard 1st!!!
Signing off, from INDIANAPOLIS, INDIANA. GO COLTS💞
SO HAPPY FOR YOU BOTH!!
Reach out to Heavy D at Diesel Sellerz. He’ll be able to hook you up with what you need 🤙🏻
At 0:30 LOL i was just on Rossville Blvd this morning. Im sure ill see yall soon always running into yall lol. its cool to live in the same town as one of my favorite youtube channels.
Love the vids GOONZSQUAD.
From watching this video, looks like you will need frame work.
When you are showing the damage @8:44 I can see the frame rail wrinkled behind the control arms right where the factory frame sticker is.
Hope all goes well with the new build.
Keep up the good work.
Larry Swetz I noticed that too but it looks like a little bit of the sticker just peeled off, but if not definitely some frame damage
@@nashsanders4738 worth to check i think
even with body on frame that area shows up at fender and hood if its bad... radiator support and door gap. Very tight trucks believe it or not..even back 30 years or more. Can't get away with much.. the frame owns it.
Can’t wait to see it rollin coal 😎 exhaust, lift, suspension kit would look good. Don’t forget the tune
Finally...I've been saying you guys needed to do a truck(diesel) build
Saw your comment foreal🤣 @drew_humbleness
OMG diesels are bad ass going to enjoy this!
not the junkyard dog I was thinking of but you are on te right path and on the right side of the pond! I bet your dad is jealous & proud at the same time lol
"what kind of gas does a diesel take" lmao! If you guys weren't so damn likeable you'd be getting ripped for that one.
love the channel.
Could be a joke
Definitely a joke! These guys are sharp.
@@brandoncarr8671 - I'v wondered about that - would explain a lot. Just putting us on, jokes on us!
Goonzquad > all other streaming services 🤟🏽👍🏼👊🏽
You couldn't get a better truck. I got my 2500 HD back in 2010 and I never had a single peoblem with it. You did good. Where's my Chevy squad?
PABLO ESCOBAR
Ford Guys Checked in the chat***
***Ford guys left the chat
😂
Can’t lie that Denali looks nice.. But I’m still gonna stick with my fords.
My 2007.5 3500HD just had its first problem. Rotted out fuel line. Been bullet proof otherwise.
@@Nick-ng5fb good luck. Even just to change the spark plugs. It's not bueno amigo. Struggle even for that.
PABLO ESCOBAR yea but tbh that comes with all newer trucks and cars. The whole Chevy dodge ford debate is irrelevant today, it’s just preference. I still have a 97 ranger with 323k miles. Original engine and tranny.. still ticking like a Swiss watch. I love my 2017 f150, but will probably trade up to the tremor package f250.
I would have complained. That’s messed up that people pull that kind of crap. Keep up the great work guys.
Yes we had the option to give back the truck for a refund but I was like nah we’ll let this one slide. I’m sure they get away with stuff like that all the time
Should be a fun build and tons of options for more power :) I have an 18 f150 lariat in magma red with the 3.5 eco boost myself.
It wasn't loader damage. Nor did I do it. I even told them what caused the damage. They still wanted to blame me. Oh well.
I think the Ferrari should be painted in the famous Ferrari red. You already have 1 white super car!
Paint it orange
yellow would be best
Rari green!!
I think they should pant it original white and then do a warp red.
should wrap it..a big American flag with a bald eagle on the hood...MERICA MOTHERFUCKERS!!
Lowkey it dont matter if you guys aint diesel guys, its all respect as you guys can build
THAT FEELS LIKE SOME MEMORY FOAM UP IN HERE.. ~ GOONZQUAD 2019
That guy is probably like jealous..... Anyways great vid as always!!
2019 and it’s already wrecked...These Trucker are something else !! 😂
I also heard them mention something about it having 50k miles
Thats like a 2015-16
Lil Richard it literally says it’s a 2019
@@DaInfamous0ne literally says 2019 on the window sticker bud
Drunk driver ..
That GMC is a great buy... Love that Denali package. Looking forward to all the repair vids. Cheers
Id be pissed about that tailgate. The 80-90k finance is probably with the guys trade. He probably had 20k negative equity that why is jumped the price. Most of the time these truck sell for 10k under msrp with rebates and stuff.
TheCamaro5: i would get rid of it and get one of the new denali tailgates lol
TheCamaro5 its clearly not from the forks. that's one hell of an angle. probably the previous owner hit it with something while loading, but those forks would have to be bent to do that. also, you can clearly see in the pics that it was dented. the goonz just didn't look super close. always look in person, don't judge be pictures.
I think off camera they cussed the operator i would if i paid 35k for a truck id be furious
63,500 that was the frost white Denali i almost bought it was 73k before rebates
Exactly right.
I've never clicked on a video so fast in my life super excited
being watching b for build, samcrac and others while waiting for your new vid but man...you guys are truly the real deal in my book! no wonder why 1.3M subscribers. You are crushing it!
@14:14 - Just a casual inspection from proud dad, looking at what the good ol' boys brought home this time...
Yep, proud dad checking his bank account to be sure the check clears... 😊
PPEI Tuning is best(best tunes and awesome customer service). Tuning the L5P motor is a bit pricey, but worth it imo.
Finally a truck I thought that goonzquad was done with keeps and trucks. Thank god they aint
That's a hill assist switch with engine break. Just like all semi trks have. Great thing to have for towing
Christopher Coleman I doubt it has actual “jake brakes” like semi trucks.
Semi truck engine have what’s called a jake brake. If u saw them u would understand. They are some serious parts in the head on top of the valves and injectors that open and release compression prior to full detonation.
@@Gcal1956 I'm understand how they work. I'm a truck Driver myself. I meant they are similar to a Jake break.
Common on GM pickups equipped for towing. My Silverado 1500 has one
@@delholford987 a actual Jake brake or is it some kind of timing retarded system ? I'm gonna look this up. Now I'm curious.
This just made my day. I was getting so tired of sport/super cars! Finallllllyyyy a Truck!!!
I work on these trucks on a daily and also sell new pull off tailgates for around $600 in the correct color and with the easy lift
Yesterday: Alexrebuilds gets a Duramax.
Today: Goonzquad gets a Duramax.
Tomorrow: What color is B for Builds Duramax gonna be?
Nathan93Baker dude already has a raptor
B is for Build does't copy these guys. You got it backwards ;)
@@01SaharaEdition tfw people think people copy eachother with mass produced vehicles. ;)
@@Ran-dom1 nice
And V tune a …...
That's a sweet truck. I like the stock grill and the stock wheels. I would fix the damage, and do the performance modifications, and keep the stock exterior appearance.
Yea, it's only about a 75-80K truck brand new.
rough country lift?wrap?new wheels?new tires?off road bumpers? LED's? def delete kit? 5 inch exhaust straight piped? folding side steps? weather tech floor liners? bed liner? there is so much you can do to a truck fellers let the real fun begin!!!
Got a notification for a truck!!!! Thank god!!!!!!
When you don't own a vehicle, and you watch Goonzquad
rebuild all your dream vehicles. *Feelsbadman*
Why. dont feel bad, they have the cash to do these projects and found a nitch here on youtube. Feel lucky that they do the work and share it with us. FeelGood
Cant wait to see u guys rebuild a side by side ATV or motorcycle
I thought you would say they’re doing one of them next
OOOOOOOMG!!!!! Thee sickest truck there is! I have the MiniMe to that but would be in heaven to have that truck! Delete Delete, Tires & Wheels & tune. Done!!!
Cant belive people actually be hating on you guys sometimes people disappoint me
No one was hating. They over exaggerated the interaction.
@@fhritpusswah9247 ok the forklift guy might not have put that ding deliberately but why the negative attitude?
@@syedazmiharoon7263 Probably had a shitty day
@@vongdong10 I understand but my shitty day would turn into a really awesome one if i met goonzquad boys
@@syedazmiharoon7263 there wasn't. They didn't give you guys the truth. Simple as that. Not loader damage, not damage on purpose, and there was not negative attitude. Like I said, they are massively over exaggerating the interaction.
That was the fasts 20 min in my life. I can’t wait for next video. Congrats for the Chanel.
The Goonzquad daily routine
Eat
Sleep
Build
Repeat
New Merch!
Can you inspect for damage prior to paying in full?? for forkilift damage and missing /stolen parts??
They paid 32,750 plus auction fees, has 53,000 miles great truck
Darryl Smith UA-cam and Merchandise sales, they are the best and most entertaining channel for rebuilds
$40k/month in ad revenue will finance a lot of cars
TheRobman good for them, living the life
@@revampgarage8341 They are lile little kids in a big old candy store...
@@revampgarage8341 best channel on UA-cam
love seeing a FORD towing a GMC. Makes my day lol!!!!!
Every Chevy I have ever own ended up being tow usually by a dodge
Douglas Smith GMC didn’t break down though
Honestly, I feel like the general level of intelligence amongst truck owners is cumulatively equal to that of one slightly educated teenager. Buy your truck, maintain it, and use it like a tool. Brand wars between 40 year old men is the definition of pathetic.
It's not just a brand tho it's the quality, design, specs etc specific to each brand that so them apart some better or worse
Truck mods that you Definitely want.
-EFI 5 dps tune
-def, EGR-DPF
-5 inch straight pipes
-cold air intake
-rear airbags for better towing
-after market front and rear bumper
-if the gear ratio isn't 4-10 than you should prob get that for maximum towin
-3 inch intercooler pipe
-68mm turbo would sound amazing
There prob more but tbh I can't think rn lol
Too bad about the "new" damage.....I guess the guy was jealous because you guys do such an awesome job of refurbishing the vehicles you buy! As long as you make these fantastic videos, I am going to be watching. Ya'll are good at what you do and you will go places in the future!
Go OEM expect for the wheels.. Cant wait for this build...🤙🤙🤙
No
Thanks for the inspiration Goonzquad!!!!
Definitely should do a Goonzquad logo wrap on the beast!!
Suggested to-do list I reccomend
1. Egr delete
2. DEF delete
3. Straight pipe
4. Lift it
👌🏻
And GMC delete
If it’s going to be a shop truck that they use to get parts and tow then a lift is pretty impractical. Don’t get me wrong I love lifted trucks but what they plan on using it for it makes more sense to keep it stock height
J B truee
Bigger garage for the goonzquad cars dream truck and the camaro too one day goonzquad making big moves still supporting
To be fair to both truck brands, you are comparing a base model work truck to a high end fully loaded truck.
The Five-0-Nine a platinum is so much nicer than a Denali
I was gonna say the same thing
True but it all boils down to personal preference
Definitely. I have a F-150 Lariat and has everything that Denali does, but my moonroof takes up the entire ceiling of my truck. Not to mention twin turbskies (upgraded mine to the Ford Performance high output)
Yup,, I have a loaded f250,, totally different from a wt
I was wondering when you guys would ever get a truck of your own lol Sick truck. Going to be a good build. Thanks for sharing.
that's LEGIT and KEEP IT OEM
Yep, Tail Gates are expensive to replace.....definitely need to inform the office folks. That Denali HD Limited.....if it's not, it's close to "top of the line". I'm not that up on GM cuz I'm a Ford guy. Great Video!
Throw a lift kit on it and some black truck rims. With a new Exhaust system. K&N Filter-it and you’re set 🤔
Man seems like yesterday you were picking up the side swiped f250 to rebuild.. been an awesome journey, glad to have been here for the wild ride🙌
Every build is getting better!! Love the builds👍👍
That's Nashville people for you bud . They hate on everyone that has a camera and trying to better themselves ! Keep em coming
I hope you guys are anticipating 2020 Corvette and 2020 GT500 builds
The very first one wrecked in da US would be cool.
Oh man, you are not taking us with you to the parts yard? What a rip!
Alex rebuilds also put a fresh video up today with a 2019 gmc truck. going to be two good builds :)
oooooo ka???? LMFAO
Shaun Clarke Alex’s was priced at 72k as well. Almost the exact same truck at the same time. I’m sure Alex bought his with less miles
@@KryptoniteDiesel alex has waaaay more work tho. 39 miles it had i thnk.
Shaun Clarke no doubt about that at all, but the mileage tho at 39 miles then after he drove it home it still had less than 900. Hopefully he keeps it for a new shop truck
With the Duramax motor I recommend going with EFI Live for the tuning. Works amazingly and really wakes the truck up! Not to mention the amazing exhaust note coming with a 4-5 inch straight pipe🤤
Dammmmm.. i. hope you got a discount from that forklift dude
Dayuuum that's a real truck, I dream to have one of those some day!!! Meanwhile, enjoy it for me guys...
7:52
“I’ve never seen a duramax before”
“Me neither, but I’ve heard good things about them”
Lol good ol goonsquad. Keep up the good work 👌👍
I just drove that route to Nashville last week. Being a resident of the Communist Republic of California, I can't believe how green TN is. Loved being there and loved visiting Jasper Highlands!! My family will be fleeing CA and will be a resident there soon!! Oh, and I will never buy a new truck again!! Pick one up used and a couple years old and you basically get all the options and the diesel for free!!!