Honda Fourtrax 300 Complete Assembly!!
Вставка
- Опубліковано 26 січ 2024
- ALL YOUR OEM PARTS NEEDED - www.partzilla.com/?gclid=Cj0K...
DIGITAL SERVICE MANUAL - www.manualslib.com/manual/990...
Full gasket set www.partsgiant.com/p325005-at...
Tools Needed!
10mm wrench
8mm wrench
10mm socket
8mm socket
12mm socket
14mm socket
17mm socket
27mm socket
7/8 socket
Impact
3/8 rachet
Deadblow hammer
punch
Pick
2 Flat head
5mm allen wrench
8mm allen wrench
Razor blade
RTV
Brake clean
Rags
Oil to spare
A month ago i decided to fully teardown a seized 300 engine. I didn't take any photos because i figured such a beloved atv would have thousands of detailed videos. Turns out there was almost no videos on this engine. Then you put up this video up couple days before all the parts i needed came in. This saved me so much time not having to reference a manual for each small step. Thank you very much!
So stoked to hear that! I hope all goes well, please let me know if you have any questions and I can try to answer best as possible
Good job
Thank you! Gonna make a video soon, on a update with how it’s running!
Very detailed video👍 Earned a like and subscriber. Thank you
Awesome, thank you!
With the gasket and gasket maker you didn’t run into any issues some say it will bind stuff up if you use both want to know before I do what you did step by step thanks
No problems Iv ever ran into, once you tighten everything down that gasket maker is so thin it’s honestly just there to help bond the paper gasket to the aluminum
Are you able to tell me all the gaskets and orings to order would help alot thanks!
amzn.to/49wB4rt top end gaskets
amzn.to/3T9XkBL only buying this for case gasket, stator cover gasket, clutch cover gasket, and potentially some of the o rings
amzn.to/4bQxLgj starter cover gasket
www.partsgiant.com/p325005-athena-complete-gasket-kit?m=495464&gad_source=1&gclid=Cj0KCQiAxOauBhCaARIsAEbUSQQ_wIEiDH3wA7B9DnJY88s-8GY_1T4ehfDLxMfiMTUHgszRG1xm2wMaAkhPEALw_wcB or this is the whole set but more expensive.
Essentially that should be everything that I can think of off the top of my head!
You put your oil rings at 180?
Yes. 1:14:00
@@TylerHinton01 Stock is 180? Never saw that before, I bought a Rebuild kit and when i take cylinder off im going to look but I never put a oil ring at 180 in my life and built lots of motors
@@jasongodin7165 like I said in the video probably not the exact or probably the proper way but it’s worked for me and stilling running on this top end with zero problems and Iv sank it probably 15 times now. No exaggeration. And no doesn’t burn a lick of oil.
Page 98 of the digital service manual in my description is the factory ring spec. “Space the piston ring end gaps 120 degrees apart. Do not align the gaps in the oil rings (side rails)”