Oh! Thank you so much bro! It's really hot here, so I set the lighting low and increased the ISO. Therefore, you might notice a difference in quality. Thanks for the feedback💜🖤
The thing I like about mesh is all the dust that goes in + the noise that gets out. Also if you get a drink spill its sure to go right to the electronics with little to no diversion. Whats not to like? Also by not putting a object in the finished product you get no sense of scale. Put a quarter next to it and find its smaller than a quarter WOW. Or maybe its bigger than a bucket of KFC we shall never know.
Yes! Depending on the CPU cooler, you can install a 25mm thick 92mm fan. It's possible to install two 140mm fans, but I chose the Noctua 15T 120mm fans instead. Since this is my first time with an SFF build, I decided going with a smaller setup.
@@KurosuGon They could have add a bottom solid panel with hole pattern like the terra fractal's side panel, or bottom panel with square holes like the ch160. A case with no bottom panel is just unacceptable to me
Nice that Noctua is finally making a D12L Chromax, looks so much better.
Yeah, that's right!
I really love the completely black look💜🖤
Amazing Video man! Great job!!!
Wow~~ Thank you so much💜🖤
Wow, this video is amazing! It perfectly balances ASMR and trendy PC building content. Keep up the great work👍
Thanks a lot bro💜🖤
나는 여기 영상 볼때마다 항상
이런 영상미의 채널이 한국에도 있다는 것에 놀라고,
이 정도 퀄리티의 영상 채널 구독자가 아직 K 단위에 있다는 것에 매번 놀란다..
오늘도 잘 보고 갑니다.
고맙습니다!!
좋은 말씀 정말 감사합니다.
앞으로 더 멋진 영상으로 만나뵙겠습니다.💜🖤
Dude, I thought it was the NH-D15 but it's acutally the NH-D12L. I really like it! Great video!!
Yeah, that's right!
It's a really cool CPU cooler!
@@PC_SNAPpun intended?
간만에 올리셨네요! 미니미케이스 처음 도전하셨군요 ㅎㅎ 퇴근길에 너무 힐링됩니다~
안녕하세요 성철님!
즐거운 주말 보내세요.
AWESOME BUILD AND GREAT VIDEO AGAIN
Thank you so much for your support💜🖤
미니 케이스 빌드 쉽지 않은데 잘 녹여주셨네요!
하이 파파님~
댓글 감사드려요💜🖤
Awesome build
Thanks man!
Somehow build like this satisfy my OCD.
Thank you so much!
Glad you liked it💜🖤
Thank was a very informitive video..thank you
Oh, thanks a lot!
Glad you liked it!
또 한 번 지리고 갑니다. 캬!!
하이염~ 방문 및 댓글 감사합니당~
Well done, boy! It's more expensive that it looks😊
Yes, it is! Cheers bro!
와... 멋지네요.. ㅎㅎ 한 대 장만하고 싶군요 ㅋ 최고 !!!
댓글 감사드려요!
저도 이번에 SFF 처음 빌드해 보는데 하나 장만하고 싶더라고요~
Dope
Cheers!
누가 보면 귀엽게 생긴 대형 스피커 인줄 알겠네요 ㅎㅎ
ㅎㅎ 감사합니다~
즐거운 주말 보내세요💜🖤
Very good video bro as always! Although I don't know why this one had a little less image quality... am I right?
Oh! Thank you so much bro!
It's really hot here, so I set the lighting low and increased the ISO.
Therefore, you might notice a difference in quality.
Thanks for the feedback💜🖤
@@PC_SNAP o I see bro
The thing I like about mesh is all the dust that goes in + the noise that gets out. Also if you get a drink spill its sure to go right to the electronics with little to no diversion. Whats not to like?
Also by not putting a object in the finished product you get no sense of scale. Put a quarter next to it and find its smaller than a quarter WOW. Or maybe its bigger than a bucket of KFC we shall never know.
Thank you for the great advice!!
I'll keep your suggestions in mind for the next video, which will also be an SFF chassis!
@@PC_SNAP Really that little case and MB is all you need and easy to carry around/move. I went bigger mesh with same gpu and x3d.
Amazing video! Is there space for a standard 92mm fan at the rear? and can u explain why u didnt use 140mm fans at the bottom?
Yes! Depending on the CPU cooler, you can install a 25mm thick 92mm fan.
It's possible to install two 140mm fans, but I chose the Noctua 15T 120mm fans instead. Since this is my first time with an SFF build, I decided going with a smaller setup.
@@PC_SNAP so u think a 25mm thick 92mm fan would fit with that same cooler ?
It would be perfect if it's 40 Super series card 🙌
Yeah! It's my first SFF build, so I used the smallest GPU of mine✌
@@PC_SNAP Your RTX 4080 Super doesn't fit in the case perhaps ?
@@azbzmy It's possible without bottom fans.
However, it's very tight with the panel and we need something like a 90 degree adapter for the 12vhpwr.
sff 빌드영상 많이 올려주세요!! FormD T1 Densium 같이 이쁜것들도 많습니다 좀 큰거는 Mcprue Apollo 케이스 시리즈도 이뻐요 추천추천
네네 SFF 빌드는 주로 여름에 작업해요.
I wish i have one :)
I wish I had one too, bro💜🖤
How hard for assemble those psu cable .... 😢😢😢
If you give up on cable management, it's very easy. I'm still finding SFF challenging too :)
Do you think a 4070ti 16gb will fit? 45mm is missing to 4070 founder edition
It's definitely possible.
Hi, can i use MATX in Meshroom D without extender bracket, thanks in advance
It's not possible, just designed for ITX motherboards.
Was the rear fan exhaust or intake?
Oh, I used it as an exhaust fan!
Thanks a lot👍
cpu 쿨러가 케이스 지원 스펙상 3mm 초과인데 간섭이 없어 보여요 맞나요 ?
04:03 아주 미세하게 간섭이 있어요. 실제 사용 상 큰 불편함은 없어 보이긴 합니다.
@@PC_SNAP 감사합니다 멋진 빌드입니다
여기에 4080 Super 는 무릴까욤? + 7800X3D
안녕하세요~
그래픽카드 최대 장착은 최대 337mm인데 두께에 따라 하단 흡기가 어려울 수 있을 것 같아요. 하단 흡기가 해당 케이스 최적 방식이지만, 4080S를 쓴다면, FE 정도 크기에 전면 흡기를 고성능 팬으로 사용하면 괜찮을 것 같아요.
@@PC_SNAP 그렇군요.. 잘알겠습니다.. 감사합니당 ^^
시스템 쿨러 흡배기 방향 어떻게 하셨는지 여쭤봐도 될까요?
그리고 전면부에도 120mm 팬을 추가로 설치하는게 도움이 될까요?
안녕하세요! 답변이 늦었네요.
하단 흡기, 후면 배기, 상단 배기 방식입니다.
전면 팬은 브라켓이 하단과 겸용이라 선택해서 사용해야 합니다.
@@PC_SNAP 감사합니다
Is that support hdd 3.5 ?
YES! It's possible to mount 2 or 3 HDDs in front of the PSU👍
Можно узнать саундтрэк в конце видео.
Thanks a lot!
Wait till the rain is gone
녹투아 NH-D12L 구매처가 어떻게되나요? 아직유통되지않는것같던데
SSUPD MESHROOM D 제품이 NH-D12L장착되나요? 142mm까지되던데 NH-D12L 145mm라서요
NH-D12L 오리지널 버전은 국내 구매 가능하고, 영상의 크로맥스 블랙 버전은 직구로 가능해요. 아슬아슬하게 패널 닫을 수 있어요.
@@PC_SNAP 하나만더 질문드리겠습니다. 전원부 방열판 제거없이 녹투아 쿨러 장착가능한가요? 영상에서는 잘안보여서요.
네~ 영상 보시면 매우 쉽게 장착되는 것을 알 수 있어요!
왜 같은 케이스, 같은 쿨러인데 제건 쿨러쪽이 다 안 닫힐까요. 영상을 봐도 모르겄네
안녕하세요! 헉~ 아직도 안 닫히나요? ㅠ
쿨링 팬을 최대한 브라켓에 닿게 해야 닫힐 거에요.
패널이 사실 아주 살짝 닿아요.
first
Thank you so much!
조립맡기고싶네요 ㅠㅠ
감사합니다. ㅎㅎ
is that the stupid case where there is no bottom panel, just a dust filter? I hate that case so much, such a stupid flaw.
Gotta let the GPU breathe.
@@KurosuGon They could have add a bottom solid panel with hole pattern like the terra fractal's side panel, or bottom panel with square holes like the ch160. A case with no bottom panel is just unacceptable to me
It's structurally similar to other cases that focus on bottom cooling fans.
I don't find it particularly unusual!
Thanks a lot for your feedback 💜🖤
ㅈㄴ 귀염뽀작하네
ㅎㅎ 감사합니다👍