Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
Вставка
- Опубліковано 14 жов 2024
- Buy part 137392702 now: www.repairclin...
This video provides step-by-step repair instructions for replacing the heater assembly on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the dryer will not heat.
Learn how to troubleshoot your washer/dryer combo:
www.repairclin...
This replacement video is applicable to the following brands:
Frigidaire
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Don't forget to like and comment on this video and subscribe to our channel!
Thank you, as I needed a quick review before I did this job.
Thanks, so helpful! My Kenmore was almost the same with the exception of an extra control on the right side but I was able to lift it up to get the top panel off.
This was perfect directions.
codanni, In addition, ensure your exhaust tube is clear of excessive lint and not blocked. Otherwise, non-heating issue may reoccur.
On the GLET1031FS4 there are no 5/16 bolts on the back of the unit to remove the motor assembly. It looks like there are two screws, but they’re mounted from the inside. Thing is, you can’t get to them because the motor itself is blocking them. This also prevents the element from being removed. Any ideas?
Great video. Replaced the heater assembly and my dryer still won’t heat. Any ideas?
my dryer just went out too..
The drum won’t come out on my kenmore. Do I have to remove them 3 screws from inside?
you need to remove all the screws from top of dryer top lid and lift drum up since it should lift out. You can also remove the 3 bolts and then reattach them when drum is out otherwise it won't be easy to align the holes to drum unit.
my frigidaire gas dryer won't heat and i can't find the thermo fuse
Me paso lo mismo .. la pudiste arreglar?
At 3:43 on the video what is the black part called? Where can I purchase it?
did you find this part I need one
@@jamesterry9874 I didn’t. Dryer still works but couldn’t find part or part number anywhere
Belt attachment to the motor was not explained
Yeah that’s very important - also forgot to tells us how to release the belt before pulling out the drum…
Watch the whole video first and you'll see a part about reinstalling the belt which might be helpful.
codanni, Test the 3 electrical components that are located around the outside of the heating element for continuity. these are the 3 components which are referenced in the video. Most likely one of them needs to be replaced.
This is not how the ffle4033qt0 is disassembled
so much of a pain to do this..
03:47 - what is the part name/number for the black plastic block?