Subd bro! Waiting for the eg next vid, it is really hard to restore a 30 yr old car, i spent a year trying to do just basic stuff on our EG and still a looonnggg way to go, all the best eg6 nate.. cheers..
I just found toyr channel and subscribed. If you please when you get into wiring get technical. There aren't many videos that do. When I start installing all my chassis lights and the fueltech for the engine I will be greatly going into depth. Especially either the COP set up and hall sensors. Best of luck My friend
Thanks! There is a guy with a GTO, doing a drift build, who did an in depth wiring series. See if you can find him, I will be there someday. Good luck!
@@eg6nate ok I see, thank you. I got mine from an EX sedan, the linkage just Looks different than mine. Also I notice you have the integra subframe brace too, do you feel any different under aggressive driving with it installed?
@robotstampede TBH, I'm not sure but I would say it probably does. I went from daily driving with a 1.5vx engine and no sway bars or subframe brace, to racing with b18c1 and all the Integra bits.
I did, though I'm going to change it up a bit. I just picked up 16ft of 4x4 from Home Depot, had them cut 1 of the 8ft'rs in half, and the other into 1/4's. The wheels are heavy duty 4" swivels from HD as well(match weight rating to your project), just use some 2 1/2 in lag screws to hold the castors in and you should be guud!
Its 4x4 Pine. 4ft long by 2ft wide on 1000lb swivel wheels. I'm unhappy with the design of it though, going to take it apart and make it better. IDK when Ill get to that, but Ill make a quick video when I build that too.
Lots of different places. I get OEM type parts from RockAuto and Honda, wheels/tires from Tire Rack or Discount Tire, and brand specific like Hardrace, Progress, or Honed straight from them.
![[Photo Pictorial] 1995 Honda Civic Full Restoration / Build / EG](/img/n.gif)
You're a legend! Great work and hope to see many more of these restoration projects on your channel
useful for civic restoration. thanks for sharing.
Those Honda’s are good it’s good for drag racing
Subd bro! Waiting for the eg next vid, it is really hard to restore a 30 yr old car, i spent a year trying to do just basic stuff on our EG and still a looonnggg way to go, all the best eg6 nate.. cheers..
Luckily I'll be doing the minimum to restore this, won't need most of the interior or wiring, etc. And lots of cutting, gunna be a clean new racer🏁
@@eg6nate will wait for it bro, will also check out other vids
Just subbed looking forward to seeing the final product great content bro
hope things are working out! cant wait to see the progress
Sssiiiiiiiiickkk... Man that's what I call madness..
I wish I could rip my car down and restore it.. Damn ur good bro..
Following u for more.. Kudos
nice video. thank you
Looks good
Love it, I also have a GSR swapped EG6. I was hoping to see if you had a build progress build up to this point. Already subbed and waiting for more
Just been super busy with a new job, I'll be getting back into it shortly 🏁
Uff, que laburito!
Nice! What's the yellow disc you used to remove the adhesive if the side mouldings?
It's a 3M "stripe off" wheel, it worked pretty good imo 👍
@@eg6nate Thanks!
@@eg6nate Nice, but wear some safely glasses or goggles next time tho, would hate to see you get something in your eye.
@@lawrencedavidson6195 Typically I do! Must've blanked that time😅
You had me at Eg…subbed to watch the resto
Look at all that crit damage! Lmfao the mw2 hitmarkers were god tier
I just found toyr channel and subscribed. If you please when you get into wiring get technical. There aren't many videos that do. When I start installing all my chassis lights and the fueltech for the engine I will be greatly going into depth. Especially either the COP set up and hall sensors. Best of luck
My friend
Thanks! There is a guy with a GTO, doing a drift build, who did an in depth wiring series. See if you can find him, I will be there someday. Good luck!
👍💯🔥💪🐐⛽️🚀🚘
Is that an aftermarket front sway bar? The oem one I have looks similar but the end holes are horizontal, not vertical.
It's an Integra front, the rear is a TypeR 👍
@@eg6nate ok I see, thank you. I got mine from an EX sedan, the linkage just Looks different than mine. Also I notice you have the integra subframe brace too, do you feel any different under aggressive driving with it installed?
@robotstampede TBH, I'm not sure but I would say it probably does. I went from daily driving with a 1.5vx engine and no sway bars or subframe brace, to racing with b18c1 and all the Integra bits.
@@eg6nate thank you, looking forward to seeing more!
Did you build that dolly yourself? Lol can I get the dimensions and what rollers did you use and where you get them?
I did, though I'm going to change it up a bit. I just picked up 16ft of 4x4 from Home Depot, had them cut 1 of the 8ft'rs in half, and the other into 1/4's. The wheels are heavy duty 4" swivels from HD as well(match weight rating to your project), just use some 2 1/2 in lag screws to hold the castors in and you should be guud!
What are the measurements for the dolly.
Its 4x4 Pine. 4ft long by 2ft wide on 1000lb swivel wheels. I'm unhappy with the design of it though, going to take it apart and make it better. IDK when Ill get to that, but Ill make a quick video when I build that too.
Salut my friend super car super video subscribe subscribe ...
Hey man! new sub here! nice content. Can I ask for help where you get your parts for the eg? Thank you.
Lots of different places. I get OEM type parts from RockAuto and Honda, wheels/tires from Tire Rack or Discount Tire, and brand specific like Hardrace, Progress, or Honed straight from them.
@@eg6nate thank you man. Appreciate it. Cant wait for your build tp ne done.