EGR Delete, Intake clean: [Part 3] Intake manifold clean/ reinstall.

This is part three of how to strip, clean and install a EGR delete.
In Part three, I'll show you how to clean the intake manifold and reinstall the manifold and crossover pipe.
Part 4 will cover making the EGR exhaust manifold blocking plate.
Subscribe to keep up to date!
Good luck and hope you like getting dirty!
This process can be used for Toyota Landcruiser 70, 75, 76, 100, 105
Any car with a 1HD-FTE, 1HZ or 1HD-T
Please check your local laws and regulations to blocking/ removing the EGR system in your car.
The mod should be used on "off road" vehicles only.
All mods are done at your own risk, all my videos are made as entertainment.

[@mountainconstructions]

Credit to you Dan.
These vidz will help so many people.
Thank you for making them

[@DanvsCar]

Thanks mate, i hope they do!

[@jimmyjones2426]

Hi Dan, gearing up to do this job, thanks heaps- 10/10 effort! One question, no gaskets under intake manifold?

[@GoharHayatt]

Great Video. Hats off to you Dan ! When is the 4th Video coming ?

[@DanvsCar]

Thanks mate part 4 will be out Thursday or Friday:)

[@vanesiakofriani6241]

Hi dan.... Nice tips... May i ask how about the hose for egr vacuum?

[@andrewbellio9749]

Hey Dan, Great vids. Few questions.
Do you recommend changing the gaskets?
How do you torque the injector lines down properly with a standard torque wrench?
Thanks Mate

[@DanvsCar]

Hello Andrew, if the gaskets are in good condition you can reuse them, but since its apart you might as well replace them for peace of mind.
Injector lines i did by feel. I have my elbow tuned to the correct torque. ;)
But you can purchase a open ring spaner which adapts to a 3/4" or 1/2" ratchet square fitting for torque bar/ ratchet.
From memory they are $15-$30, come in handy for other things as well.
Hope that helps!

[@morrisgithitho3428]

Any reason the injector lines have to be undone and redone in the order you have mentioned? Pls repeat the order here for removing and reinstalling..

[@ntknow]

Great videos thanks Dan. Is there a gasket between the head and the take manifold?

[@DanvsCar]

Hello! Thanks mate, yes there is. In the video i had it sitting on the head when putting the intake back on.
Think part number was 17171-17030. Check with your local dealer or on amayama.com.au

[@mhs2572]

hello, please reply, , lc100 has engine oil in the intercooler to intake pipe. Do you believe its a leaking turbo? or could it be something else. thank you

[@DanvsCar]

It can be turbo or blowby from the engine breather pipe.
Install catchcan.
Check play in turbine shaft.

[@fvlok]

What does the intake valves look like??

[@DanvsCar]

As in with the pasty black sludge?
There was some in there, but over time it will clear itself.
As long as you block the egr/ install a catch can.

[@franciscosalazar8753]

please excuse my ignorance, but what is the black liquid used to clean? And is there any similar procedure you might have taped for an L200 Mitsubishi? Cheers

[@GeoAvila]

Use Gasoline o Degreaser