Custom Dynamics ProBeam Dynamic Led Vent Inserts For Road Glide
Вставка
- Опубліковано 16 жов 2024
- The Brand New Custom Dynamics ProBeam Dynamic Led Vent Inserts For Road Glide's were just released during the 2019 Sturgis Motorcycle Rally. I was fortunate to be able to get my hands on a set of these vent inserts a little bit early so that I could get them installed and create this video to share with you. I believe Custom Dynamics has done a fine job on these, I really like the way they look once installed, super clean and fresh.
www.customdyna...
🔻 Touring Midwest Approved Products & Gear🔻
www.amazon.com...
🔴 Important things to check out: linktr.ee/tour...
📌 Please Subscribe To Touring Midwest on UA-cam, it's free📌
goo.gl/NrqtCt
For more info on us visit: www.touringmidwest.com
like us: / touringmidwest
follow: / touringmidwest
follow: / touringmidwest
Contact Info:
touringmidwest@gmail.com
Andrew Manuel
P.O. Box 325
Hayward, MN 56043
(612) 405-DREW (3739)
Our logo/watermark was designed by "Studio On Fire" a letterpress and design workspace based in Minneapolis MN.
visit their website: www.studioonfi...
For More Motorcycle related content check out the following links:
Braaap Town Crew:
🔻The Alpha Corps: / @thatswayzelife
🔻SkidPig_moto:
/ 0utlawkustoms
🔻Knuckles TV: / @knucklestvmv
🔻JMac7o7: / @jmac7o7
🔴 Two Wheel Obsession:
www.twowheelob...
I really appreciate your install videos. I installed the windshield trim lights with the vent inserts. Once I was done one side was working correctly on the vent trim. The other wasn't working. I found that by accident I had connected the wrong harness lead to the turn signal and to the vent trim connector. By accident I got the leads correct on the right side. This was also an important detail that custom dynamics left out of their instructions. The long single lead connects to the vent insert. The Y lead connects to the turn signal and power lead. The male lead goes to the power. Your videos helped me sort those things out. The same is true for the adapter for the windshield trim.
Awesome, thank you.. im glad that my video was helpful. How do you like those lights so far?
@@Touringmidwest I very much enjoy the lights. They enhance the appearance as well as visibility.
Great vidoes, I noticed you changed your headlight, went searching for a video on it, no luck, Hoping you could do a quick on with maybe pros on the new & cons on the old unit.
Thanks again from Canada.
Nice Job Daniel, and an added benefit of the LED vent inserts: prior to installation, bugs, bees etc. have a clear route to the rider, with the grilles incorporated into the vent inserts, you still have the cooling airflow, but for the most part the grille will prevent most bugs getting through.
Very true, stay safe out there!
Excellent video thank you for showing us
Glad you enjoyed it
Hello Andrew. I just now ordered a set for my 2018 RGS and am super excited to install them. I really like how you call out the tool sizes as you show how to, very helpful. I used your link to access the web page and left a comment identifying Touring Midwest for my purchase. Thanks 👍🏼 👏👏👏 😎
Awesome, thank you. I think you'll love it!
Great job and look forward to more detailed videos.
Thank you Robert Have a great day… stay safe
Excellent install, looks nice.
They look great. Anything that helps you be seen by other motorist, I'm all for.
Amen to that.
I don’t often watch videos about Road Glides, but when I do ...
Looks great. FYI, I think my Custom Dynamics led front signal lights are brighter than my street glide headlight. Now I need a new headlight.
Get their new headlight.. it projects light the direction that you lean.
Touring Midwest 🤔
Terrific, just love the Custom Dynamics products.
I received an email notice from them just after watching your excellent install video. Thanks!
Ordered it from their website, cannot wait to do this project. Seeing the headlights on your bike has me thinking I need them. How are you liking them? They look very cool, kinda makes the full package. Thanks once again for another great install video!
It's actually growing on me.. lol. I was not sure about the look at first but it is bright especially on high beam.. works great! The led vent inserts are awesome as well.. I really love the way these look and they really match the ProBeam headlight well.
Them lights look awesome! Love the looks!
They definitely add an extra touch of cockiness to an already cocky looking machine!
Hell yeah brother that looks amazing!!! Great job on the install!!!
Thank you
Nice install Andrew
Great video. Helping me put them on my bike.
great to hear
I just got these! Ordered them a while back. Not released but were in a Drag book. Going to pick up my bike today from the shop. Excited to see how they look. Custom dynamics everything on my shark nose. None of my other led lighting are the pro beam version so I hope it looks good.
Oh yeah it will look good.. I think the only pro beam that really needs to match are the tail lights because they all have those tubes.
@@Touringmidwest After putting on close to 200 miles with these new lights so far, here are my thoughts: Pro - Looks great, bright, matches all the other CD components I already installed, fills in space nicely next to headlight (similar to Ciro Fang), custom dynamics = take my money please! Con: Loud Whistle! Super annoying at freeway speeds. I had to close my vents to get the noise to stop which is not ideal on hot days. I had Klockwerks vent grills before with no whistle. Also, Custom dynamics doesn't fill in the entire vent space, there is a gap on the outside. My Klockwerks filled in the entire space nicely. Just my 2 cents. I've e-mailed CD regarding the whistle so we'll see what they say.
@@captainsuburbia8956 I didn't notice the whistle that you mentioned when I was out yesterday (roughly 250 miles) you are correct about the gap though, I did think that was a little strange but it doesn't bother me too much. Hopefully you can figure out what is causing the whistle, I'll continue to listen for it and see if I notice anything.
Nice job! I love vids like this.
Sweet brother. Very nice.
Heck yeah.. thank you.
On order for my17 RG. Great job!
Good choice! How do you like em?
What kind of windshield do you install?
Im running a 12 inch pro Touring flare from KlockWerks
Looks really good.
Thank you.
Nice, question though, were did you get the sticker to make it look like your Road Glide is frowning?
That's the Mean Mug from Gas Capitol Customs tell Neil I sent you.
Great product - just what I was looking for. I just purchased a 2020 Road Glide Ultra and need to fill those spaces on the outside of the light. This will be perfect. For 2020 - they eliminated the side vents so the screen portion will be nice for bugs and of course the added signals / running lights loo cool. I have not ridden at night yet, how did you like the stock lights? I really love most of CD lights but can't say I love the lights for the RG. I love the squared off top and bottom of the stock lights but I'm concerned how bright they will be at night.
The stock headlight on the RG is very good.. I think the brights on the CD headlight are like daylight the dims are probably pretty close to stock... both are great though. This vent trim is very clean...I really like it allot.
@@Touringmidwest The CD vent trim came in today and I installed this evening. your vid was a nice reference. The instructions weren't bad but it's nice to have a vid to reference. Thanks for posting. it sure does look sharp - very nice addition to the bike.
@@RideAmerica excellent... I'm glad your happy with them.. thank you for checking back to the video. Happy riding.
Touring Midwest I have purchased these side vents but have not installed yet. I have a concern that these vents are going to effect the aerodynamics of the Road Glide vents which work amazing! Have you noticed any change in the feel of the bike since installing? Thanks for any info! Your vids are a big reason I purchased some lighting upgrades for my ‘18 RG! Ride safe brother!
@@nicholsincorporated140 absolutely no difference at all.. you should be just fine I think.
I like your headlights, what brand is that and where can I get one? Thanks!
That is also custom dynamics
@@Touringmidwest thanks for the quick response! Keep up the good work!!!👍🏼
@@leapinlevy69 heck yeah, no problem. Have a great day!
What headlamps are those with the halo mean mug? It looks badass
It's the custom dynamics probeam headlight
Looks good TMW!👍
Are you going to get the new probeam highway lights on the highway bars
I don't think so.
Should test the lights before reassembly
Really wish they offered these without the mesh insert part. I like having the opening there. Guess I'll have to go to Ciro 3D and buy theirs
Ciro 3D makes them. I believe that Ciro was the first company to put them out
ciro3d.com/collections/fairing-accessories/products/fang-led-headlight-bezel-in-chrome-or-black
Looks good
Thanks doyle
nice
The turn signals are so bright, the inserts doesn’t show up as well as I thought they would. I’m sure they will look better in person.
Yeah for sure.. you really can't see the screens at night but it looks super clean in the daylight.
First 🤙
Nice!