Eufy Noise Issue Solved
Вставка
- Опубліковано 21 сер 2024
- Follow up video ( • Eufy noise issue ) to the noise issue I was having with my Eufy Robovac 30. The noise went away after adding electrical tape to the non keyhole side of the brush. I hope this helps anyone else having issues with their Eufy.
It worked for our Eufy too! I literally only wrapped one layer of electrical tape around the round end. I made sure to keep it thin so it doesn’t cover the very end of the roller. I can’t believe how simple this fix was! Thank you!
I bought a new robo vac because of this. Kept the loud one just in case. Tried this and super quiet again. You figured it out buddy! Thank you! Funny their own tech support couldn’t or wouldn’t just tell us how to stop it, admitting the quality defect.
Well, you can always buy a new one to solve it. Wich is what the customer support maybe wants you to do.
THANK YOU SOOOOOO MUCH!!!! I took this thing apart 6 ways from Sunday and could not figure out the noise issue. Problem solved with electrical tape in 2 minutes! Thank you again for sharing your solution!
Thanks a million for this - it worked brilliantly. I used two of my daughter's hair ties instead of electrical tape, and the robovac is quiet again.
Thanks for the hair ties tip! Such a relief hah
Not all hero’s wear capes!!! Thank you!
Thanks for your video, it narrowed the issue down, but you can pop that circle piece off to expose a bearing with a rod inserted in the roller, gently pry the bearing off and pull the trash and such out and away from the bearing then put back together and it fixed it without the tape. Appreciate your troubleshooting!
Thank you! This thing was about 30 seconds away from being tossed!
Thank you! I tapped that side and it worked. Noiseless again!
Thanks a ton
It worked
I was so frustrated that I was close to binning it
Thank you! Can’t wait to try this! The sound in your other video is exactly the one mine makes.
Oh my gosh! Perfect, my Eufy is back to being quiet. Was ready to toss in garbage.
Thank you!
i really wanna thank you! i had the same problem with Yeedi 2 Hybrid and now is solved! Thank you
Wow. How frustrating and easy a solution to the problem! Thanks for this video, solved my problem immediately.
Oh my!!! It worked! I wrapped electrical cord black tape around the corner you pointed and it worked! Hope this will help other viewers. Thanks so much!
You da MAN! Our Eufy G30C Max would run us out of the house with the loud noise while running. This simple procedure fixed the noise issue. Thank you!
Thank you! Crazy that much noise comes from a little brush!
Just tried this out on my 35C after the annoying sounds started. It worked great! So glad you put this video up.
Thank you soooooo much.
You fixed the problem. My place will be clean again 😋
Gracias desde Perú!
Your video showed the exact issue I was having.
Time will tell if the electrical tape to wear and if the noise returns, but for now - THANK YOU. I was about ready to toss it in the can, and this took care of it.
Note: first wrap of tape did not solve the problem. I put a 2nd wrap, and intentionally left about 1/8" overhang on the end, which I folded down on the end as flat as possible - though a little lateral damping also couldn't hurt.
If you take off the black piece that you put the tape on, there is a bearing underneath it. You can pop that out with a small flathead screwdriver and there will be a bunch of hair and dust back there. The noise is because that bearing is dirty and the black circle is spinning when it shouldn’t be
Bless you! It worked!!!
@@brianmuehlenkamp2010 yep you nailed the root cause. just wiped a little dirt and a tiny squirt of silicon and we're back in business with a freely rotating bearing. Thank you
This solved the problem on my Viomi! Thank you so much!
Thank you for posting. I thought it might be the wheels rubbing making a terrible loud noise. I took out the brush and put 2 small pieces of electrical tape in the seat for Brush holder. Problem stopped immediately. I would not have guessed the plastic was wearing down from spinning and just needed a little cushion for the brush. Thank you!
Thought so too! Replaced the right wheel and new side brushes. Worked with the tape fix!!
This worked PERFECTLY! Thank you!
Thank you for this super simple and effective repair! It worked for my Coredy R550 robot vacuum, which looks almost exactly like your Eufy model. I had had my robot in the closet for many months because of the noise it was making but decided to give repairing it one more try before I bought a new one. You saved me several hundred dollars - thanks!
Thank you!!! Was about to spend 60 dollars on new wheels cause I thought that’s what it was.
Dude, you saved my life! Wife was ready to throw it away. Nothing would solve this horrible noise for weeks. Until I came across this video. Worked like a charm! Thank you!
This worked perfectly! Mine was only making the rattle noise on bare floor, not on rugs or carpet. I was so stumped after a through cleaning. Thank you.
OMG it worked!!!! thank you from Chile.
Thanks a lot! God, I really won't miss that noise
OMG Thank you so much for making this video! I was just about to throw the whole unit out when I came across this video. I didn't have tape but another commenter mentioned cling wrap and it worked like a charm!
E Tape for the win! Thanks dude.
This is an excellent video. I knew that the sound was coming from the rolling brush but thought it was stripped gears for the rolling brush, not the brush vibrating. :)
I never comment anywhere..but this worked. Cant thank you enough. I used clear plastic hair tie twisted around it a few times luke a previous commenter suggested. Thank you. Truly.
Oh my gosh. I had the same problem. I could not figure out where the noise was coming from. THANK YOU SO MUCH.
Thank you so much fixed the rattlingly sound
Fixed it right away!! A piece of tape on the right side. Thanks a lot! 2/4/24.
thank you so so so much!! i got it for my birthday 3 years ago and was always happy but since half a year or so this sound became worse and worse, it was so loud and no matter what i cleaned it didn't help. turns out it was just too much space haha. your advice helped!! thank you again, my frustration is gone
It's wild how much noise the worn brush can make! BRRRRRR! Thanks for posting this!
I just used your tape fix and it worked perfectly. Thank you!
You da man! Thank for making this video. Hard to believe the brush could make so much noise.
worked like charm for me. Thanks a lot
Wow I did not expect to fix this issue in less than a minute! Thanks much pal!
It worked like a charm! Thank you so much!
Worked like a charm. Thank you for going through the trouble of posting this
OBVIOUSLY, this would not work. In desperation I tried it anyway
. >
Worked great! Thanks.
Thank you for this video.
I was about to order a new one. 😂
Amazing! This worked so well for me! Thank You!!!
I was skeptical, but did what you said anyway...unbelievably brilliant! I used duct tape. HUGE THANKS!
Used some medical tape I had at hand in the way you advised and this fixed the issue. Thanks!
You are great! I would order a brush with cover, 25 usd, but figured out the problem with a simple tape!
This was the fix, thanks a ton!
Worked like a charm. Thanks!
Absolutely amazing, can’t believe it worked 😊 thank you so much for sharing this 👏🏻👏🏻
Wow! Thank you. This video just saved me a couple hundred $ and my sanity!
That was amazing, thank you. Fixed our Eufy, canceled the one I had ordered to replace it.
YOU'RE A GENIUS!!
Thank you , sir . I didn't have electrical tape but used a bit of sellotape and it did the trick . The noise before before was pretty loud and annoying but now - after that fix - the robot vacuum is back as good as when it came out the box . Many thanks
Thank you. Such an easy fix for a noise that was eluding me!
Fixed mine! Thank you!!
And the world is right again. My wife is going to be so proud of me. Thanks for the video, but I will be taking the credit when my wife finds out. Cause, you know how it is.
Thank you! This fixed it instantly
I'm just adding one more thank you to the pile. The noise was driving me nuts!
thank you. this definitely helped with my bissell as it was making horrible noises 🙉
Thank you so much man :) Same solution for Philips 3000 series aqua.
Thanks a lot that worked for my g30
Muchas Gracias! Mi Robovac G30 empezó con el mismo ruido, sin razon aparente. Ahora funciona perfecto! Muchas gracias nuevamente!😃
This fixed mine! Thanks 😊
Ok so i had to do a couple things to fix this issue - my brush wasnt rolling was the sound so i had to actually break loose the brush end and spray wd40 on there so it would actually spin. Then i did the lil piece of tape so the end would stop spinning the brush now makes zero noise. Thanks for the tip.
Huge help!!! Thanks so much for sharing this - fixed the problem immediately. You are a hero!
Thank you sooooo much!!! You are a genious!!! 🙌🙌🙌
Thanks bro 👊🏽 fixed mine as well 👌👌👌👌
you soab. That was it. That was my problem and a little tape fixed it. You're amazing thank you!
I'll be dammed ! This worked. Thanks alot!
Thanks for solving my issue!
Worked like a charm… thank you so much
Use a pliers to remove the circular knob on the end to expose the bearing. Clean the hair and dirt out and it will run quietly again. I had to use a safety pin to get all the hair
Thanks for share. I'll will do it right now!
👍2 min fix - fantastic
Well I’ll be darned!! Thank you!
Funcionó! Muchas gracias por el video. Saludos desde Chile.
Worked great, thank you so much!
This totally worked and fixed in 2 min. Thank you!!!!!
T
Thank you for sharing this. I have the same noise. I solved my problem with some small felt sticky pads I had laying around. I wonder if the root of the problem is that I bought aftermarket roller brushes and they are smaller.
Thanks! Saved me 👍
You’re awesome, thanks!
Dude, fucking awesome you're great !!!
So thankful for this video!!!
Thanks! Just saved my Deebot from early retirement.
Thank You....noise is gone. I think it has something to do with the replacement brush, maybe they are saving .000001 cents on plastic by making it smaller
Thank you so much !!!
Thank you so so much.
fuck yeah! just fixed mine, thank you
Dude… thank you! Regular dollar store sticky tape works as well….
It worked!
Thanks a million
Thanks man!!!!
Gracias por fin se fue ese ruido molesto
Thank you!!
Thank you!
Thank you for solution. Can this be solved with a new main brush? Or is the problem caused by an indentation in the device itself?
Thanks a ton!