I love the gap on the garbage can. I once gapped a super small window through the top of an outhouse (ie toilet) at what I thought was an an empty campground, when I reviewed the footage, there was someone in there!
That was smooth. Usually it's all aggreesive and fast flying flying with steele 😂 though he does butter it out well and make everythibg looks so smoooooth.
I could watch you rip this spot for days...... There is so much to do here it's insane, and you did a couple of uncommon tricks in this video, although perching seems to be showing up more and more but the docking, that's just clutch.... very cool.. Oh shit quick side question.. is it possible to build your daily driver anymore??? Like with the CCD cam, the 5v bec and VTX that actually accepts that low a voltage?? Is it still possible to build a "real" Steele edition Apex anymore?? I would look myself but I don't know the exact components you used to build this kwad... I only been in it for just about a year now, and after trying a few different 5 inch kwads, a friend gave me an old Apex frame kit, the "legacy" or whatever and I fucking love it! I found a shop online that still has a bunch of the body kits left, so I stocked up... but you can't deny your analog video quality, well it's just better then mine.... no matter what I do really. I can get it good, but not this good... I was hoping to source some of the old components you used... if it's even possible...
This is the third time I've seem this flight with a different title😂😂 still watch everytime.....I need to come to Atlanta because this is one of my bucket list spots.....this amd glory hole and hells gate
You'd need to set your quad up for 3D flying. Not a whole ton of people do it and even fewer are any good at it. I honestly don't think that trick has been named yet.
And here’s the title of the video from my channel where you can see this trick in my version, in case anyone is interested: Apex 5 & DJI Avata exploring the bando. It’s hidden in the shorts section, so you’ll need to search for it a bit or find it by the title.
Hi I’m looking at building one of your quads. Have all parts now bar motors, gone for your older setup with the kiss v2.looking at getting the motors and the new stout v5 are 1950kv whereas the silks are similar specs to the stout v4 at 1750 kv. Which motor will give me the closest to your setup
what is his current setup? and should I go with analog or digital (I'm not new to fpv I just want to get a new setup) also would u recommend the dji o3 air unit paired with goggles 2 and tbs crossfire?
I wouldnt reccomend crpssfire unless youre going for specifically long range, ELRS is cheaper and also a lot faster. Ive also used tracer which is a descendant of/in the crossfire ecosystem which is also a fast link.
Hey wanna make a new frame together? I know a company that’ll cut them any thickness. Any shape for me. I bet you know a someone that’ll cad design whatever. I know some one that has many pesos to get this done. He even has a nickel or two. Holler at me on my face hook messages if you wanna do it. I ask because it would be best to have the goat of freestyle and frames. If he was interested.
Mr Steele Docking Video needs to be scrubbed from my search history
😂
😂😂 That's dirty, we'll said.
☠☠☠☠
I love the gap on the garbage can. I once gapped a super small window through the top of an outhouse (ie toilet) at what I thought was an an empty campground, when I reviewed the footage, there was someone in there!
This never gets old!
That was smooth. Usually it's all aggreesive and fast flying flying with steele 😂 though he does butter it out well and make everythibg looks so smoooooth.
I could watch you rip this spot for days...... There is so much to do here it's insane, and you did a couple of uncommon tricks in this video, although perching seems to be showing up more and more but the docking, that's just clutch.... very cool.. Oh shit quick side question.. is it possible to build your daily driver anymore??? Like with the CCD cam, the 5v bec and VTX that actually accepts that low a voltage?? Is it still possible to build a "real" Steele edition Apex anymore?? I would look myself but I don't know the exact components you used to build this kwad... I only been in it for just about a year now, and after trying a few different 5 inch kwads, a friend gave me an old Apex frame kit, the "legacy" or whatever and I fucking love it! I found a shop online that still has a bunch of the body kits left, so I stocked up... but you can't deny your analog video quality, well it's just better then mine.... no matter what I do really. I can get it good, but not this good... I was hoping to source some of the old components you used... if it's even possible...
This is the third time I've seem this flight with a different title😂😂 still watch everytime.....I need to come to Atlanta because this is one of my bucket list spots.....this amd glory hole and hells gate
Apparently he’s doing some UA-cam A/B testing
Those statics in the FPV feed in 2024 really make me feel home
Silky smooth as always with a sprinkle of Steele! Loving the docking rip. Keep em coming man…..Rotorflex👍
I used to do this upside down with my 3D heli in the local club. Good laugh!
insane flight nice remote thanks for sharing.
Wasnt this already uploaded?
Yeah I thought the same thing. I checked, it was uploaded 3 weeks ago.
what is your tilt
Hey folks,
How is it that no one can do this? I’ve done it several times on my channel.
Of course, shoutout to Mr. Steele and the whole crew watching!
Also, check out the short titled :Impulse RC Apex 5 6S Caddx Vista Bando Fun.
i confirm this. i saw this 😂
whats it called when someone flips it upside down and then throttles into the ceiling?
You'd need to set your quad up for 3D flying. Not a whole ton of people do it and even fewer are any good at it. I honestly don't think that trick has been named yet.
And here’s the title of the video from my channel where you can see this trick in my version, in case anyone is interested: Apex 5 & DJI Avata exploring the bando. It’s hidden in the shorts section, so you’ll need to search for it a bit or find it by the title.
Mr. Steel. I challenge you to make a 7min+ fpv, at your favorite location, to the infamous song 'Stairway to Heaven'.
Hi I’m looking at building one of your quads. Have all parts now bar motors, gone for your older setup with the kiss v2.looking at getting the motors and the new stout v5 are 1950kv whereas the silks are similar specs to the stout v4 at 1750 kv. Which motor will give me the closest to your setup
I run 1750kv on my setups :)
full send
I've got to try thIs perching on celings and lamps and shit fire 🔥 bro.
what is his current setup? and should I go with analog or digital (I'm not new to fpv I just want to get a new setup) also would u recommend the dji o3 air unit paired with goggles 2 and tbs crossfire?
I wouldnt reccomend crpssfire unless youre going for specifically long range, ELRS is cheaper and also a lot faster. Ive also used tracer which is a descendant of/in the crossfire ecosystem which is also a fast link.
🆒️ Rippin
It's not the same movie like 3 weeks ago ?
Mr steele were you on bo6 in the last week
Ethix dockingstation ❤
Yo Steele! Could you make a EdgeTX/OpenTX Voice pack? Still rocking the X9D+ from the old days and would love to have your voice on it
the legendary hcrep
The inspiration I needed to swap out my broken motor.
The inspiration I needed to fly until I broke a motor
Refartless your still a tinkle of surprise
Perfecto 👌🔥💪🏿
Didn’t we see this exact video 3 weeks ago?
Damn Steele. Where is this boys?
🔥🔥🔥🔥
thumbnail in 3:25
ive seen this exact flight already, like 3 weeks ago, are you recycling footage? even has the same length of video
That girl is brave or stupid, or just confident in the Steele abilities.
Hey Mr.sassy man make a 4.3 again. Please. If not that’s fine.
you Uploadet this video befor xD
Yeah
nice
MR STEELE REUPLOAD ????
says the guy who never trippy spins or any weird upside down tricks at all really
You uploaded this video before
U are crazy
❤🔥
M'y Héro
Hey wanna make a new frame together? I know a company that’ll cut them any thickness. Any shape for me. I bet you know a someone that’ll cad design whatever. I know some one that has many pesos to get this done. He even has a nickel or two. Holler at me on my face hook messages if you wanna do it. I ask because it would be best to have the goat of freestyle and frames. If he was interested.
6st in commenting 😅