I do carpet cleaning and have to clean the nozzles because stuff from the water supply gets stuck in the nozzles from time to time. I also do power washing. I lost pressure the other night. I was in a hurry and didn't run water through the hose before connecting it to the pressure washer. My 4000 psi pump only put out 1000psi then zero psi. My wife asked if the filter was clogged. When I finally listened to her I checked and found the filter was covered with leaves from the water faucet. Easy fix once you know. Thanks for the video.
I spent way too long working on this thing and then I finally checked the tip lol figured it may be helpful to someone out there. Thanks for watching Paul!
Thank you, I don’t have an extractor but I do have that upholstery wand. It got clogged the very first time I was trying to use it. I’ll see if that tip is the problem. Thanks again.
I have the previous version of this model. I've checked the tip and the lines inside and they're clear. How would I go about clearing the actual spray hose?
Man I got lucky and it was just the tip on mine, I’m not too sure about clearing the hose. Maybe take all the fittings off and try some compressed air. It may be easier to just get a new hose though.
You may have to contact Mytee and see if you can get a new pump or if there's another option. I think the pumps run about $300ish but its been a while since I looked them up
Yes sir! Great question! Vapor lock happens on this machine when you turn on the heater before your pump is running. Always turn the pump on first and run water through it for a few minutes then turn the heater on to heat the water. The pump should be the first thing on and the last thing off. It says it takes about 8 min to heat the water but mine has always heated faster than that.
Pushed it in but it just pops back I’m not sure if the issue is using a 220 to 110 converter but vacuum seems to work pump makes no noise or sound and no water comes through
I always have to prime mine before filling it with water, I shoot water inside the water intake (where the screen is inside the tank) with a garden hose.
Sorry brother I don’t know which caps you’re talking about, I haven’t had to buy any spare parts for my machine yet luckily. I just try and keep it clean. I’m sure you can find replacement parts online I’m just not too sure where.
Man I couldn’t tell you what it’s called but it’s a little clip that came with mine that is designed to keep that quick connect from coming apart. That’s exactly what you need so that’ll stop happening to you. I wish I knew what it was called.
My mytee is a year old I smelled a rubber burning smell then bam no pressure then the pump light stays on even when it's off any idea we're to start brother ?
I don’t man, my first thought would be that the pump burnt up for some reason but that might not be the case. I would try some of the steps in this video and see if any of those help you out. You may try contacting Mytee and see if they have any idea.
What kind of update are you wanting to see buddy? I’d love to make one. I have a video planned hopefully soon for our new trailer build. That should be coming up soon. We’re having a beast mode 2.0 made from Shawn Hodges at Arkansas Washing Equipment. Going to be 2- 8gpm hot water machines, gas roof pump, remote downstream kits for each washer, light bars, tank lights and all kinds of good stuff. I’ll definitely be making a video of picking that up and doing a full walk around. Anything else you want to see let me know and I can work on getting it up on the channel🤙🏼
Was about to start a job when this happened. Thanks a million!!!!
No problem brother! Glad it helped 🤝
You saved me a lot of time and hassle. I appreciate you 👊🏼
Awesome brother! Glad it helped 🤙🏼
You saved me $300. Thanks for the pointer. Fixed it perfectly
Love to hear that! Glad it helped!
Having the same issue. I've tried everything and this video is the best I've seen.
Happy to hear that! I searched for a while and couldn’t find a decent video so I was hoping this would help someone! Thanks for the positive comment🤙🏼
I do carpet cleaning and have to clean the nozzles because stuff from the water supply gets stuck in the nozzles from time to time. I also do power washing. I lost pressure the other night. I was in a hurry and didn't run water through the hose before connecting it to the pressure washer. My 4000 psi pump only put out 1000psi then zero psi. My wife asked if the filter was clogged. When I finally listened to her I checked and found the filter was covered with leaves from the water faucet. Easy fix once you know. Thanks for the video.
I spent way too long working on this thing and then I finally checked the tip lol figured it may be helpful to someone out there. Thanks for watching Paul!
Thank you, I don’t have an extractor but I do have that upholstery wand. It got clogged the very first time I was trying to use it. I’ll see if that tip is the problem. Thanks again.
Dude I sent one head back and was like something is up here! Thank the Lord it got to working
Thanks for the vid, my 8070 spider started to do the exact same thing. Works now 👍🏼
Awesome!! I couldn’t find another video that went over the tip clogging up. Glad it could help you out!
I have the previous version of this model. I've checked the tip and the lines inside and they're clear. How would I go about clearing the actual spray hose?
Man I got lucky and it was just the tip on mine, I’m not too sure about clearing the hose. Maybe take all the fittings off and try some compressed air. It may be easier to just get a new hose though.
Thank you! I had a similar problem. I appreciate your post.
Absolutely! Glad it helped!
My mytee s300h is leaking from the pump
You may have to contact Mytee and see if you can get a new pump or if there's another option. I think the pumps run about $300ish but its been a while since I looked them up
Appreciate you man you saved me a lot of money.
Glad to hear that 🤝
Can you explain what vapor lock is? What causes it and how to prevent that?
Yes sir! Great question! Vapor lock happens on this machine when you turn on the heater before your pump is running. Always turn the pump on first and run water through it for a few minutes then turn the heater on to heat the water. The pump should be the first thing on and the last thing off. It says it takes about 8 min to heat the water but mine has always heated faster than that.
If it is vapor locked what can you do ?
Pushed it in but it just pops back I’m not sure if the issue is using a 220 to 110 converter but vacuum seems to work pump makes no noise or sound and no water comes through
I always have to prime mine before filling it with water, I shoot water inside the water intake (where the screen is inside the tank) with a garden hose.
I have a mytee 300h and the vaccum is not working I just opened it. Not sure how to prime it.
Do they sell those small caps by themselves
Sorry brother I don’t know which caps you’re talking about, I haven’t had to buy any spare parts for my machine yet luckily. I just try and keep it clean. I’m sure you can find replacement parts online I’m just not too sure where.
At minute 3:02 when you said the fitting theres a small cap next to it
@@aliens6919 Oh I gotcha! Yeah man I’m not sure. Everything I have came with the machine. I haven’t had to order anything else luckily
Thank you!
Well done
Thank you 🙌🏼 glad it helped!
What’s that blue clip you have on at 3:25? Mine always disconnects from there and it’s annoying af
Man I couldn’t tell you what it’s called but it’s a little clip that came with mine that is designed to keep that quick connect from coming apart. That’s exactly what you need so that’ll stop happening to you. I wish I knew what it was called.
@@DustToGloryPW mine didn’t come with one, damnit
@@drew7014 I looked online real quick and couldn’t find one but I bet if you did some digging you could. Maybe search Mytee quick connect cover
My mytee is a year old I smelled a rubber burning smell then bam no pressure then the pump light stays on even when it's off any idea we're to start brother ?
I don’t man, my first thought would be that the pump burnt up for some reason but that might not be the case. I would try some of the steps in this video and see if any of those help you out. You may try contacting Mytee and see if they have any idea.
My handle continuously spits water out & I don’t understand how to fix and I’m not pulling the trigger
Mine too
I bought one after Christmas and I'm on my second one! I should have probably cleaned the head or something lol
Update video coming soon?
What kind of update are you wanting to see buddy? I’d love to make one. I have a video planned hopefully soon for our new trailer build. That should be coming up soon. We’re having a beast mode 2.0 made from Shawn Hodges at Arkansas Washing Equipment. Going to be 2- 8gpm hot water machines, gas roof pump, remote downstream kits for each washer, light bars, tank lights and all kinds of good stuff. I’ll definitely be making a video of picking that up and doing a full walk around. Anything else you want to see let me know and I can work on getting it up on the channel🤙🏼
I’m not getting water flow at all on my Mytee and shit is irritating af.