This helped me troubleshoot no pressure in my mytee 8070. In summary I removed all hoses; from water feed to pump, from pump to heater element, from heater element to housing. I used compressed air to blow air through all the hoses, water pump, and heater element. Then I put everything back together and viola. It was good to go!! When i removed the hoses from the pump i turned the pump on to see if it worked and it did. Turned the heater element on and that worked also. So, decided it was clogged somewhere through the lines. I'm not a technician but it worked out for me. God bless you all.
Thanks I did used a paper clip and hose was clogged going out into heater. That’s all I had to do, I wasn’t getting no water on sprayer.Thanks for your video.
Bro we dont need to know your mental dialog to the T, just summarize what you DID, this vid should have taken 3 minutes. BTW you didn't need to remove the water recovery tank to access the pump compartment.
This helped me troubleshoot no pressure in my mytee 8070. In summary I removed all hoses; from water feed to pump, from pump to heater element, from heater element to housing. I used compressed air to blow air through all the hoses, water pump, and heater element. Then I put everything back together and viola. It was good to go!! When i removed the hoses from the pump i turned the pump on to see if it worked and it did. Turned the heater element on and that worked also. So, decided it was clogged somewhere through the lines. I'm not a technician but it worked out for me. God bless you all.
Thank you brother!!! I was so frustrated and didn't knew where to start but I just fixed my machine thanks to you.
Seriously? I just got mine an i am havin issues after 1 week same timg
Thanks I did used a paper clip and hose was clogged going out into heater. That’s all I had to do, I wasn’t getting no water on sprayer.Thanks for your video.
I just tore my entire Mytee apart only to find out it was the tip lmfao...face palm
Thank you for this video! Well done!!!
Good job man. You figured it out.
My mytee 1003 just stopped spraying in the middle of a job smh... I guess I'll try to self repair mines now...
My pump starts up but then it turns off. Only when I squeeze the nozzle does it turn back on
Problems with the vaccum, when i started takes a few second to get a strong vaccum any reason? It is almost brand new
Having same problem now can we purchase the hose
I have a 8070 brand new and the pump is not working at all . I will call the the dealers if a have some kind of warranty?
Mine is not spraying either i hope its an easy fix its 1 week old
I hope I can fix it I have a big truck tomorrow morning I'm so nervious 😰
😌
I can't connect to the quick connector?
If the pump is on and working, it may be becsuse there is pressure at the fitting. Turn the pump off and try to connect it - should help.
My mytee is doing the same thing
So expensive for one of these but every one I see in use is taped together and fucked up
I've spent so much in repairs with the two i have.
You don't put tape on those fittings. They look like JIC.
Bro we dont need to know your mental dialog to the T, just summarize what you DID, this vid should have taken 3 minutes. BTW you didn't need to remove the water recovery tank to access the pump compartment.
sam3d got it UA-cam troll. Thanks for your comment
Who really cares about ya imput ....? Not me or any1 too much time on ya hands go do something constructive 😂
This didn’t help me do anything . Why would you put diy repair if your not even fixing the problem
Have you found any solution…I’m stuck with the same problem
hello how can i find you on facebook