Це відео не доступне.
Перепрошуємо.
Mahindra 6000 series tractors walk around (6065 / 6075)
Вставка
- Опубліковано 14 сер 2024
- When we sell a tractor, we always do a "walk around" with each tractor. We do this to let customers know where to perform daily checks, grease, and basic operation techniques. This series of videos is intended to refresh that information for our customers. Several more of this type of video is posted on our channel. Look for your model and check it out. We hope this helps owners have more knowledge about their tractor. Please make sure to LIKE and SUBSCRIBE to see all our new videos as they come out. Thanks!
I just wanted to thank you for the detailed video. I just traded my 8 year old cabbed 3550 PST for a 2024 cabbed 6075 PST. My 3550 never gave me a lick of trouble and the only complaint I had was the paint sucked. That tractor did everything I asked of it and it'll make a good first tractor for somebody else. I'm hoping the 6075 lives up to the legacy of it's smaller brother (and that Mahindra fixed the paint issue).
That said, even though my dealer is awesome when it comes to service, he's really never gone over my tractor (old or new) like you just did with this one. I learned a lot watching this video and I will be saving it for future reference.
Thanks again for putting out such a comprehensive video.
And for anyone considering buying a Mahindra, I can tell you from experience that 8 years ago I got a very reliable tractor, and got a LOT more tractor for the money than if I'd have splurged on green paint. I'm looking forward to the same type of reliable service from my 6075.
Thanks. Like and subscribe for more of our content as we put it out. We don't publish each week, just when something is needed. Check us out.
Nice, precise conversation!
Thanks. I still get tongue tied from time to time!
Thanks for video. Very well done
Glad you liked it!
Very clear and concise video, well done and thorough. Thank you for your time. I’m looking at a new Mahindra 6075 PST cab model up here in Canada. Heavy built machine, I really like it.
Glad it was helpful!
What size an type are the rear hydraulic valves?
Most all manufacturers have gone to using a standard 1/2 inch iso coupler on rear valves. There are 2 separate valves with 2 levers. There are 4 outlets on the rear. I can't remember if either will detent to constant flow or float. Hit me back next week as a reminder and I will check. Thanks
Weak link I’ve found with my 6065 is I’ve already replaced the complete joystick assembly ( At the time under Warranty)because of the cast metal around the main steel pin after only owning it 1 yr this past April 2023 and just now replaced the axis point ( September 2023 )at the bottom of the joystick that works the up/down and forward/back tilt again because it as well is made of cast metal but the new one I was able to buy is made of aluminum and from what I’ve seen in line and from the dealer where I bought it new April 2022 said they have replaced half a dozen so far so to me if there is a recurring problem then do a manufacturer recall and make them out of steel I use this tractor on a daily basis loading logs it’s not a weekend warrior hobby tractor I also just replaced the solenoid and control module the day before I replaced the axis part I bought this tractor for 3 main reasons 1: metal hood and fenders 2: no regeneration down time and DEF fluid 3: $14000 cheaper than John Deere 5065E but starting to wonder if I should’ve went ahead and spent the money for Green now the dealer told me that when I replace that part again I will have to buy the complete joystick assembly to get the broken part replaced because now that’s the only way they sell it and it’s $400 sorry for the lengthy comment but it’s time someone stood their ground and said what’s wrong needs to be fixed so hard working people can keep working not spending the money we need to live (solenoid control module and axis connector $300) in 2 days loader attachments are only warranted for 1 yr
Please understand that I am a dealer, not the manufacturer. Have you reached out to Mahindra Customer Service? Sometimes they ALL need a wake-up call. However, we just experienced our first 6000 series joystick failure on a new tractor. We were able to getvit going next day for our customer but robbed parts from another new tractor. It was last week. I have the Mahindra Service rep for our area working on replacement. You might ask your dealer to do the same.
I'm from SC how much would it take to finance that tractor what i meant to say is how much would you need to put down please sir let me no thanks for your time nice tractor have a vegetables farm need a bigger tractor with more hight
Rarely ever do any of our customers pay anything down.
I bought mine from a dealer in Alabama. $5,000 down and financed 28k, paid it off in 18 months to save another 5g's in interest. The tractor had 150 hrs. on it, now it has 500 and it's an unstoppable beast. Loaded tires it weighs in at a bit over 10,000lbs and I modified a JD 8-a backhoe to fit, no welding to the tractor......what a tractor!!
Under current programs and rebates, I would buy as many new with warranty 6065 Mahindra tractors as I can find for that much. I wish even dealer cost was that little anymore.