How to Change Coil Packs on a Chevy Malibu

Поділитися
Вставка
  • Опубліковано 5 гру 2018
  • In this video I show / How to Change Coil Packs - GM 3.1 L V6 Engine/ ignition coil pack replacement/ ignition coil pack gm 3.1 l v6/ chevy malibu coil pack replacement/ 2001 malibu coil pack ... DIY and save a couple of hundred dollars!!
    Feel free to leave a comment. If this video helped you, then please click "Like" & consider "Subscribing." ...Thanks!
    DISCLAIMER :
    Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles and/or machinery equipment, as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury which could damage the vehicle and/or machinery equipment, compromise its safety, or cause property damage.
    Although this video has been prepared with the intent to provide reliable information, no warranty (express or implied) is made as to its accuracy or completeness. The viewer of this video assumes full responsibility if a repair or maintenance procedure is undertaken by the viewer based on the contents of this video. Neither is any liability assumed for loss or damage resulting from reliance on this material. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS VIDEO. In no event will beachtroll, be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this video. Beachtroll assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk.
  • Авто та транспорт

КОМЕНТАРІ • 17

  • @sierraball444
    @sierraball444 2 роки тому +1

    I'm teaching myself to change out mine by watching and rewatching this video. It looks really easy!! I change my own own oil, and that's easy, and this looks very simple, if I just take my time with it. I have an 06 Malibu; fairly easy to work on and the parts are easy to reach.

    • @beachtroll8344
      @beachtroll8344  2 роки тому

      Changing the coil packs are relatively easy, just a little time consuming....Good luck and thanks for watching!

  • @darktheoryofthemist
    @darktheoryofthemist 5 років тому +3

    Hmm, this made the most sense. Thanks

    • @beachtroll8344
      @beachtroll8344  5 років тому +1

      Trey Williams...Glad my video helped you & thanks for watching!

    • @darktheoryofthemist
      @darktheoryofthemist 5 років тому

      beachtroll also, the orange rubber parts, did those come with the coils?

    • @beachtroll8344
      @beachtroll8344  5 років тому +1

      Trey Williams .. yes, they did

  • @melodyjohnson-mq2om
    @melodyjohnson-mq2om Рік тому +1

    Can you tell me how to properly put the plug wires back on. What is the order. Is it just matching 1 to 1 or what is the correct order they go on. Pls and thank you.

    • @beachtroll8344
      @beachtroll8344  Рік тому

      If you “Google “ 2001 Malibu spark plug wire order it will show a diagram on the proper order….Good luck!

  • @trentonandrews3242
    @trentonandrews3242 Рік тому

    Do I need those new orange rubber covers for my new coil packs my new ones did not come with anything like that just a white packet of dimethylpolysiloxane

  • @carlosbust9774
    @carlosbust9774 2 місяці тому +1

    Hi did you have to do an idle learn procedure cuase my chevy corsica 1994 3.1l v6 book says i have too.

    • @beachtroll8344
      @beachtroll8344  2 місяці тому +1

      I made this video a few years back. From what I remember, I didn’t do an idle procedure…. See below, hope this helps! 👇👇
      GM IDLE RELEARN PROCEDURE
      AFTER THE REPLACEMENT OF THE ELECTRONIC THROTTLE BODY (ETB), THE VEHICLE ON-BOARD COMPUTER MUST RELEARN THE NEW THROTTLE PLATE IDLE POSITION.
      IMPORTANT
      After the replacement of the electronic throttle body, the engine idle speed may fluctuate, cause the engine to stall or even turn on the check engine light.
      IDLE LEARN
      Perform the following relearn procedure for the on-board computer to adjust to the new idle position on the electronic throttle body.
      1. Start and run the engine in PARK for 3 minutes.
      2. Turn the engine OFF for a minimum of 60 seconds.
      3. Start the engine and run for another 3 minutes.
      4. Engine should idle normally after 3 minutes.
      After having performed the relearn procedure and the engine still does not run within normal idle speed, it will be necessary to drive the vehicle above 45 mph (70 Km/h) including several decelerations. Also
      ensure that after driving the vehicle, let the engine idle for a minimum of 5 minutes.
      If the engine has returned to normal idle speed, the relearn procedure is completed.
      If the idle speed is still erratic or incorrect, restart idle relearn procedure.

    • @carlosbust9774
      @carlosbust9774 2 місяці тому +1

      @@beachtroll8344 oh thank you very much!!!

  • @fookthenewworldorder450
    @fookthenewworldorder450 4 роки тому

    Hey can you create a video on engine mount, and transmission mounts? I have this exact vehicle but 2003

  • @DavidGavinETC
    @DavidGavinETC 4 роки тому

    Could this apply to a 92 Corsica too? S as far as the firing order

  • @terrellanderson9566
    @terrellanderson9566 3 роки тому

    How can you tell what numbers to put on the new coil pack

  • @teishamisunderstood339
    @teishamisunderstood339 4 роки тому +1

    Yeah I’m bouta fix my car right now