Just came back to this video to say thank you for this and for your honesty. Went ahead and got your silicone oil a few weeks back and it worked wonders!
I think by tight the guy means hard to move, where you have to put a bit of force into moving each joint. That is a big problem if you are trying to make a stop motion animation with them.
As someone that's recently gone down the Mafex rabbit hole, Thank you! Now I don't have to worry about pin/joint breakages after being extorted by scalpers lol.
I have a Legacy Transformer called Leadfoot. His joints are soo tight I almost broke him transforming him for the first time. I already have some bb gun oil that has silicone in it. I'm going to try that.
Maybe it's just me, but I miss the old days when figure joints weren't overly tight or overly loose. Seriously, I've been trying to swap hands on my PR Lightning Collection figures, but I can't seem to remove them. And with all the QC issues many PR fans have reported, I don't wanna risk breaking my figures when posing them.
Ha! I had the same issue with my bootleg Mafex Spider-Man (no way I'm buying official releases from them anymore), but I used dish soap to fix Spidey's legs and biceps.
Got the new Marvel Legends Infinity Saga Iron Man MK III and his arm/shoulder rotation joint was totally frozen. Was afraid I'd shear it off. Heating it would loosen it up, but only until it cooled then seized up again. Heated it and added some of the 100% silicone lube and it's not frozen up again, even after cooling. Thank you for this.
ah rip could it not move forward? i think thats the same issue i have with my infinity saga mk 21 ive heated it up it moves a little bit but not really and when it cools down its just stuck. i dont wanna break him so ill try this
Is this good for custom figures with tight joints , would it ruin the paint ,,(using model masters paints and airbrushing) an assistance is appreciated a ty fro the review 🙂
Hi. Excuse me, I had a question. What is this liquid and what is it used for? This liquid does not exist with this brand in my country. If you can help me and tell me what this liquid is, I would be very grateful.🙏
Hey Dstar do you think you could fix my mezco punisher I recently got him and the right arm wont swivel at all in the biceps and I haven’t really been able to enjoy it since
Question: can you use this on Figures hands because I have a Goku and a broly with really Tight hands that I can’t even get it to come off and when I do, I can’t get it back on.
Hey just got silicone oil and its working on my figures, just want to know how long it will last on the figure until or if it will revert back to being tight and squeaky
Depends on the glue. Did someone put super glue in it? Or was it like that straight from the box? If straight from the box hot water will loosen most glues, but super glue is tough to remove.
Dstar01 it might be glued or cement that got into the joint as it was being customized. I’m trying to see if I can source just the joint without having to buy a doner figure
During the video you were talking about RC shock oil being an alternative. Is there a specific brand and/or type that you recommend? You also briefly mentioned density. Is the recommended density number still 100?
I’m not to sure if this work but maybe you could get like a twist tie from sliced bread, and take off the paper and heat up the metal part. Then use the heated up metal stick and poke it into the broken peg and let it cool down and pull it out. Maybe look up a video of how to do it to see if the method actually works
Just came back to this video to say thank you for this and for your honesty. Went ahead and got your silicone oil a few weeks back and it worked wonders!
does it really? im thinking about buying a bottle for my ginyu which the arm is so tight i can barely move it. plus how long did it take to come
This video is so entertaining, it inspires me to produce videos on my channel.
I love it when the joints are nice and tight. The reason i love tight joints is because they're strong enough to hold poses.
Yes, but you run the risk of stressing the joint out and it breaks.
Ye but not when it makes a loud squeaking noise every time you move it
I think by tight the guy means hard to move, where you have to put a bit of force into moving each joint. That is a big problem if you are trying to make a stop motion animation with them.
This video is so entertaining, it inspires me to produce videos on my channel.
As someone that's recently gone down the Mafex rabbit hole, Thank you!
Now I don't have to worry about pin/joint breakages after being extorted by scalpers lol.
Bought mine as soon as I saw the vid. Thanks hopefully get all my figures fixed tight joints 🙏🏼
This video is so entertaining, it inspires me to produce videos on my channel.
Used this on a Mafex Homecoming Spidey KO and it was like magic. The squeaks were gone and the joints move like butter!
Jiren getting ready to do the Special Beam Cannon
I have a Legacy Transformer called Leadfoot. His joints are soo tight I almost broke him transforming him for the first time.
I already have some bb gun oil that has silicone in it. I'm going to try that.
Maybe it's just me, but I miss the old days when figure joints weren't overly tight or overly loose.
Seriously, I've been trying to swap hands on my PR Lightning Collection figures, but I can't seem to remove them.
And with all the QC issues many PR fans have reported, I don't wanna risk breaking my figures when posing them.
That's the sound i love
I love that sound
Spiderman be ripping cheeks in the intro
Ha! I had the same issue with my bootleg Mafex Spider-Man (no way I'm buying official releases from them anymore), but I used dish soap to fix Spidey's legs and biceps.
Dish soap? Does It work?
@@arzaykarzay5884 Yeah, I used it to loosen up some joints.
This video is so entertaining, it inspires me to produce videos on my channel.
Do I really have to take some of my figures apart to properly oil them? I don't want to risk breaking anything.
I Love fix friday
This video is so entertaining, it inspires me to produce videos on my channel.
Got the new Marvel Legends Infinity Saga Iron Man MK III and his arm/shoulder rotation joint was totally frozen. Was afraid I'd shear it off. Heating it would loosen it up, but only until it cooled then seized up again. Heated it and added some of the 100% silicone lube and it's not frozen up again, even after cooling. Thank you for this.
ah rip could it not move forward? i think thats the same issue i have with my infinity saga mk 21 ive heated it up it moves a little bit but not really and when it cools down its just stuck. i dont wanna break him so ill try this
Does someone know if i can use silicone oil for drawing as well?
This product helped so much !! Thanks
Is this good for custom figures with tight joints , would it ruin the paint ,,(using model masters paints and airbrushing) an assistance is appreciated a ty fro the review 🙂
Yes it would
This video is so entertaining, it inspires me to produce videos on my channel.
Thanks Dstar your awsome
My mafex spiderman classic costume version's left leg became tight few hours ago 😞
Lube it up
i have a sh figuarts goku supersaiyan full power and his leg joint is bad, evrytime i try to move the leg it, the leg comes off, would this help?
I need to get that Kazuya figure
Does any silicone oil work
Does gun oil work too?
Does treadmill silicone oil work
Glad your back
can I use dish soap??
When will you have this back in stock? I see some silicone oil on eBay but really not sure if it's the same stuff.
You could use literally any non petroleum based silicon/oil and will be safe and work just the same ;)
This video is so entertaining, it inspires me to produce videos on my channel.
Is this effective long term? Or would u say after a month re apply or a week
What should i do if i oiled a bit too much..?
I have sh figure body chan, her right arms is really tight meanwhile her left amrs is rotating and moving really fine. Can i use baby oil to fix it?
I've got a Donnie revoltech figure that came with a stuck waist join (ball joint)t, so HOPEFULLY this works
I need this type of help with transformers studio series 86 scourges extremely tight wrists.
This video is so entertaining, it inspires me to produce videos on my channel.
Would this work with a frozen joint? My SHF Bardock's shoulder swivel is completely frozen and I really want to fix it
It should
This video is so entertaining, it inspires me to produce videos on my channel.
u can also use nail polish for loose joints
When i saw this video i was amazed totally im so amazed
can i just use regular silicone spray or does it have to be silicone shock oil
If the spray has petroleum distillate, avoid it. It will melt your plastic slowly
What if it won't move and it twists the peg.
I tried fixing my original spider-man with the pledge floor care from your other video but only the knees were fixed unfortunately
By Kiki or this dudes stuff.
This video is so entertaining, it inspires me to produce videos on my channel.
Did you get my order for this to kingman AZ
Hi. Excuse me, I had a question. What is this liquid and what is it used for? This liquid does not exist with this brand in my country. If you can help me and tell me what this liquid is, I would be very grateful.🙏
This helps a lot thanks for the video.
hey, is this method is working with the squeaky shoulder joint?
Yo dstar will baby oil work?
on my marvel legends supreme strange the left upper thigh swivel just doesn’t move since it’s so tight
Hey Dstar do you think you could fix my mezco punisher I recently got him and the right arm wont swivel at all in the biceps and I haven’t really been able to enjoy it since
Message me on ig
How should I wash off excess oil if I accidentally get it all over the figure?
Hot water
This video is so entertaining, it inspires me to produce videos on my channel.
How do you fix a figure that has one shorter leg
This video is so entertaining, it inspires me to produce videos on my channel.
Will work to model kit? I have patlabor 1/60 goodsmile company, the parts joint quiet tight went I tried to move after build it. Help!
100% silicoin, that’s new🤣🤣🤣
Yo can you help me my super saying blue arm joint won’t pop back in
ima use this for my demonical fit majin vegeta the leg is stiff will i have to pop off the leg and add the oil?
How do you use it if it's the joint to rotate the arm forward do you just put it in the oil in the shouldar and butterfly joint
Can you plz buy shfiguarts akuma bootleg, neca Akuma bootleg too 😅
what is the bottle called
Question: can you use this on Figures hands because I have a Goku and a broly with really Tight hands that I can’t even get it to come off and when I do, I can’t get it back on.
Some shmerge.. what oil?
would it work with olive or coconut oil? im having a hard time with the imagination works luffy's waist ball joint, that thing is stupidly tight
On my mui goku figure on his arm where the shoulder is it’s tight and squeaky would that work on there
Dude can I put this oil on Spiderman toybiz 18"...the joints on the arms...has so much articulation and um can I just use this oil
Yeah
Hey just got silicone oil and its working on my figures, just want to know how long it will last on the figure until or if it will revert back to being tight and squeaky
Like a month
This video is so entertaining, it inspires me to produce videos on my channel.
Do you have to keep applying the lubricant every so often? Or is it a one time fix?
Every so often. Depends of how much you play and pose them. My Kazuya is still lubed up and it's been about a month now.
This video is so entertaining, it inspires me to produce videos on my channel.
Your oil is out of stock man what can I use as an effective alternative?
Hey i was wondering if you fixed missing accessorys
Can we use normel oil
Depends on the oil
Thank u
How will you know if your figures have tight joints because my dragon stars gogeta is really hard to move
My sh figuarts ash is super tight
i used to use sewing machine oil will that ruin the paint ?
If you check the label and it has petroleum distillate then it can ruin paint.
Does it work for stuck joints?
Hey can you head swap 1.0 Vegito with demoniacal fit Vegito?
will that solution work on the neca tmnt figures?
Yes
What's the best way to fix a mafex spiderman wrist? The peg broke and I don't want to ruin the figure.
Get a ko to replace it
Is there a way to fix a frozen joint? I have a custom Base Form Android 21 but one of the ankle joints got glue in it.
You can try super glue debonder. But most of the time it does not work
Dstar01 that sounds so assuring. Lol.
Depends on the glue. Did someone put super glue in it? Or was it like that straight from the box? If straight from the box hot water will loosen most glues, but super glue is tough to remove.
Dstar01 it might be glued or cement that got into the joint as it was being customized. I’m trying to see if I can source just the joint without having to buy a doner figure
During the video you were talking about RC shock oil being an alternative. Is there a specific brand and/or type that you recommend? You also briefly mentioned density. Is the recommended density number still 100?
Hey dstar idc if u can recommend this but I tighten up my figs by puttin em in the freezer lol
I do that too. But 1 st I heat the joint with hot water to make the joints malleable, then I squeeze them so they are tight, and then freeze them.
Lol me too i put my marvel legend spiderman and scarlet spiderman too lol
tbh, i used dawn ultra and boom, no more tight ssj3 goku legs
Did you ever fix the bootleg yamaguchi deadpool?
No. I gave it away
whats the intro music in this vid?
I custom made it. Download link in the description
Awesome!
Does this work for diecast figures?
Yes
Dstar01 Thank you! There are no videos that I know of that show you how to use a remedy for tight joints on vintage diecast. It’s aggravating. Lol
Hey man can you try to loosen a Mcfarlane toys Fortnite Vendetta ankle joints ?
I just wanna make sure that it isn’t going to scam me
Just asking ur or not but i like the video cause ur video’s are awesome
Bro what is the name of that spider man action figure
Im scared to pose my spiderman/vulture
Two pack spiderman the arms are so tight i dont wanna snap it
Lucky for me I haven't gotten a really tight figure...yet.
I broke my mafex Spider-Man hand peg and I’m gonna have to super glue it back on :/
Is the mafex spider man ur subscriber action figure i know his name but don’t know how to spell
It's my figure 👍
To be honest I love this sound but still thanks for the vedio
I thought that sound was normal...oh no
That sounded like a fart from a baby
What up
Hi
My spider man’s peg broke of at the hand and it’s stuck in the hand
I’m not to sure if this work but maybe you could get like a twist tie from sliced bread, and take off the paper and heat up the metal part. Then use the heated up metal stick and poke it into the broken peg and let it cool down and pull it out. Maybe look up a video of how to do it to see if the method actually works
Ccooll
First