Broken Rusty Lock with Missing Key - Restoration
Вставка
- Опубліковано 27 тра 2024
- In this video i'm restoring an old broken and rusty Padlock.
This Padlock was sent to me by one of my subsrcibers from Italy. Right when I saw the picture I knew I want to restore this lock and I was impatiently waiting for the package to arrive. I found out that his padlock was made in Germany by Kamp in the 1930s. The lock was very rusty, the key was missing and it seemed to be broken. It was also very rusty inside, all moving parts were stuck and the closing mechanism was broken. Due to the amount of damage on the case due to rust I decided to paint it. This way I can use filler to achieve a nice finish, otherwise I'd had to sand all pitting off and there was just not enough material left to do so. The plates from the mechanism were damaged a lot too, but they were all still functional. So I only removed all sharp edges and gave them a nice bluing finish for rust protection. The aluminium part, where the key comes in was damaged a lot too and had a lot of play in the case. If I would sand it clean it would get even more play. For those reasons I decided to make a new one, I choose bronze because it would fit better to the overall look at the end. Making the key was quite a challenge, but it turned out very well and it actually worked. In my opinion the padlock turned out very well and I'm very happy with the endresult.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Daniele Castoldi
Tyler Nelson
Afreeflyingsoul
Gregory
Ricardo David
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Zachary Grimes
Timestamps:
00:00 preview
00:39 disassembling
02:09 showing all the parts
02:22 cleaning the parts with the parts washer
02:50 sandblasting
03:29 restoring the case
06:18 restoring the shackle
07:38 making two brass parts to support the shackle sideways
08:17 restoring the plates
08:58 remaking the broken part
10:09 making a new spring
10:53 making new pins on the lathe
11:37 making three rings for the blind rivets
12:08 making a new front cover
13:34 making a new part for the key on the lathe and mill
15:19 making a new key
18:12 showing the parts before reassembling
18:31 reassembling
20:25 showing the finished restoration
21:05 final test
Time and costs of this restoration:
I was working on this project for 2 week
$10 steel for the frontplate and closing mechanism
$10 steel for the pins and key
$50 paint
$25 rivets
My camera:
Panasonic HC-V180
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Second Channel:
/ @mymechanicsinsights
My Patreon Page:
/ mymechanics
Some pieces ruined from rust: repairs them. Some pieces practically disintegrated from rust: makes them. Pieces missing with no pattern: reinvents them. End result: better than new. My Mechanic: the best on UA-cam.
John Valdez Hotel: Trivago
Great job
@@byfordbarnard2264 😈
6:45 He welded the spring that provides bounce when you open it too fast. Feature lost.
صغغي ضبلسرططذقلففثهAymen Alaaططjnjknjij
That key might somehow be the most impressing thing that you’ve ever had to remake. You, my good sir, are an artist!
agreed. thet key looks AMAZING! what a skiled guy like dam!
@@AstronxD He used the plate stack from inside the lock to establish the pathways he needed to cut the key to fit.
@@michaelgriffin6448 Exactly that. But damn. Still impressive.
@@wowt I would have just hit this rusty old lock again and again with a hammer until it busted apart!
I like the key the most. It is unbelievably pretty.
I love how you completely got rid of spongy texture of rust and made it shiny.
The amount of times i have fallen asleep to these videos is amazing, not because they are boring, but because craftmanship is so mesmerizibg it just hypnotizes me👌🏻
Good night :-)
I would love a compilation audio soundtrack of all the 'my mechanics' videos. It would work great as an ambient sound recording.
ت😂وزةةظوى😂😂😂😂😂😂ووزددةىظظزىةدظ
Why am I addicted to these videos?
Because they're heckin' awesome.
@@brentusfirmus Can agree
Same to me
Same here and can't imagine.
Wife: where’s the child?
Him: let’s make a new one
He gonna restore the child🤣
@@orangewhitecathitsvapepen3250
Samuel L. Jackson style. 😎
Continues to grab saw.
Him: *takes the body of a dead child*
Luke this comment could mean 1 of 2 things
Bluing, whether by heat and oil or bluing liquid, is immensely satisfying to watch.
Those brass curls are beautiful, look like miniature Christmas ornaments
I absolutely love seeing your previously rescued tools make a cameo appearance to help you rescue another thing.
That shear is sweet, isn't it?!
The fact that you're machining brand new parts and just going off the look of the old (and damaged) part to such a fine degree of accuracy is actually insane. I'm glad people with skills like yours exist in this world. I for one am baffled by your sorcery, bravo sir.
And yeah making a key... what the actual ...
I think BosnianBill and LockPickingLawyer are loving this one!
I am totally gobsmacked at your restoration of that old lock. What a superb job! How did you work out what the key looked like when there wasn’t one to copy? A miracle!
Once you have a core open, making a key is actually pretty trivial. Alternately, if the pins and springs are all rusted, you simply make a new lock combo.
@@9volt65 trivial for someone who knows how and has the skill set rest of us not a chance!
Лучший реставратор которого видел!Напильник-это твоя стихия!,в прочем как и всё остальное!Супер!
Hey if I had all of this guys tools ..
I'd still be sitting here binge watching his channel.
Midnight Bangkok 😂😂😂😂😂
I actually HAVE most of this guy's tools, and I'm STILL sitting here binge watching videos.
@@MikeS-um1nm I've always been a bushman now retired, but watching this I wish I did have all his tools at least one does not need to be super fit to use them what I mean is these is no running uphills carrying 20kg's of equipment and that's not the waterbotten or first aid, all one needs is electricity and a roof over one head and bob's your uncle :)
It is cool to see the restored shear being put to work on this project. (12:33)
You're videos are so satisfying and relaxing to watch it helps me with my insomnia
Thanks, I'm glad you like it :-)
It must take you days to get the finished shine that you get. Incredible work. Keep it up. And love no stupid background music. Thank you. Its just you making museum quality and working restorations.
One of my favorite things about this channel is occasionally seeing older restorations being used as part of the shop
Yeah; I spotted the shears right away.
although it's a tiny percentage, it perplexes me that *anyone* would thumbs down this
They are seething with jealousy, prbly..l can only aspire to this man's level of skill
They are jealous. Anyone giving this a thumbs down has to be a jealous troll. This is a restoration that I can't stop watching. It's absolutely perfect.
This guy is a master craftsmen the problem here with the thumbs down situation is nothing but envy and jealousy for him to restore such a small mechanism like this is just amazing.. great job...
While I wouldn't ever dislike one of these videos as the work is amazingly high quality he does a great job of showcasing it, part of me understands why some true die hard restoration fans might be a tad bothered as some of the work he does, isn't necessarily a restoration back to the "brand new" product. For instance the polishing he does on a lot of the parts and the removal of cast marks, that's not exactly a restoration as it is removing some of the original features of a piece (even though those original features are ugly and can ruin the look, it's still removal of original features).
Again, I wouldn't dislike one of these videos because while it may not be a restoration to the "like new" condition (it's actually a direct improvement of the original condition, I don't entirely know what the word would be though, it's not an upgrade as it's typically old/antique things, it would be more like refinement? Somethin along those lines), I do still understand why some people would feel that could potentially take away from some of the original craftsmanship of a part/product ya know?
For the sake of a bad example, its kinda like how you don't watch videos on restorations and conversations of paintings for the sake of wanting them to repaint over everything, you watch them because you want to see a deteriorating piece be brought back to as close to the original condition as it can get, that being said, this channel is the best of it's kind on UA-cam from what I've seen so far, it's not clickbait titles or things people have clearly found in flea markets and yard sales that they've intentionally let rust, it's actual proper antique pieces that he brings life and functionality back to and refines the overall fit and finish in the process, so all around the reasons to like the videos, heavily outweigh the reason to dislike the videos
@@meatsmell8639, you make good points in your elaboration of why some might thumbs down. Kudos for a solid contribution to the comments. I see what you mean about polishing and removal of casting lines and other blemishes. It could be debated whether this truly represents "restoration". One thing I'd add - In contrast to paintings, form seems to follow function when it comes to tools. For this reason I'm okay with improvements to fit and finish. In most cases I think we witness the best version of the object - One the original creator could be proud of.
Anyone else get excited when they recognised you used the Beverley Shear you repaired in an earlier video? Great to see the old tools actually be utilised again.
As much as I love these videos and how you make it look simultaneously easy and impossible, I'd be curious to see a video where you do the calculations, how you measure, how you figure out what the missing piece was supposed to look like, how you decide which dimension to mill in first
lots of homework research ..but when you run the machines you have to think a few steps ahead ..when cutting a part down you need to hold it / clamp it / you want to do as much as you can in 1 set up .. but also if you do too much when you flip the part you might not be able to clamp it ,, over time you learn what you can do in steps . when he made the key that got me .. turned out great but not knowing what the key looked like I got lost at 1st ..
I would also like to know how long the whole process took in term of hours.
@@socrabe جخازدددببذذذبفء
@@randytravis3998 ذ٠٠٠٠٠٠٠٠٠٠0
The whole restoration is insane, but the key!!! A masterpiece!
Yuppp....👍👍
Exactly. When I first saw the lock, I asked myself where the key would be. I jumped to the end to see how he made the key, then back to the beginning. Making that key is actually another level.
@@tdangjr I would loved to have seen how he figured out the key profile
@@awhisperinthewind4253 I second that.
This man's work is of the very highest quality , you will not see better anywhere else I take my hat off to him .
Should of won the youtube content creator of the year award instead of spoiled brat no one has heard of.
AGREED ,I WAS JUST WONDERING WHAT HAPPEN TO THE KEY ??????/ AND WHY NOT MAKE ONE ??????
Bruce Shaw and it’s such a pleasure for my eyes to watch his artsy videos and to look over his shoulder
he also has the right tools. buying such tools costs thousands of dollars. the tools make the job very easier as well. he is talented as well
This is awesome! It is one of the most complex restoration videos that I have ever seen. I just love watching missing/damaged parts being fabricated. Thank-you!
Glad you liked it!
WOW That lock looks better now than when it probably did brand new! Beautiful job!
ive seen all of your videos and everytime I watch one my mind is blown all over again. Your skills as a machinist are so incredibly impressive i want you to know how appreciated by us you are for making these videos. I'm in awe each and everytime. thank you
You just stole every single word from my keyboard :)
@@nocontrol813 *You could always **_make a new one_** then.*
@@bren106 lol I cannot even dream of being in mymechanics' league :)
It's not only his outstanding skills as a machinist. He's also very good at video editing (making videos we all enjoy watching), and his attention to detail is of the very highest standard.
I look forward to any new videos (like this one) so much, and I'm sure you are the same!
@@sl9sl9 i came to write all these things but you had it already :))
He's the master of the machine shop. Superb camera angles and video editing. Better than some Hollywood productions. Five Stars!
Wait,he didn't have a camera team😲
Сказать что я офигел от просмотра, ничего несказать. Я поражён. Особенно от изготовления КЛЮЧА!👍👍👍👏
Thank you very much :-)
берут новый замок,мотоцикл да что угодно. и делают из него ржавый. понимаете ?
Мне понравился комментарий на английском, что в следующий раз он найдёт старый ржавый ключ и сделает для него замок))) 🔐
@@user-co2pn3cd4m да это так. Но я говорю в таких случаях: не нравится - сделай сам!! И покажи
Мастер просто супер, очень нравится смотреть, как он все чётко и ловко делает.
да
Жалко, что не показали как он узор ключа для пластинок подбирал
I'm addicted to these videos. I love seeing old things repaired instead of thrown away. Also, this was amazing. He made all thosr pieces so perfectly! :0
that was the nicest looking key I've ever seen in my life
The lock looks pretty nice too.
Amazing how he made that key,
Mein KAMP! Das Schloss sieht fantastisch aus, mein Freund.
I love seeing you use equipment that you’ve restored in previous videos :)
The circle is now full circle
I love the
"This was too rusty... I made a new one"
"This wasn't right... I made a new one"
"There's no key... I made a new one!"
Great workmanship
magpierh it’s actually “I make a new one” 🙈😂
@@johannabergman8165 touché 😂
Point still stands though
Fugugugjbibib
I feel a little joy every time when broken things get a "second life"
Pls send me to him
Yeah it gives me HOPE
I truly appreciate you keeping the patina on the interworkings...
Just amazing! I was in awe watching you make the key from nothing. Your attention to detail does my OCD a world of good. Thank you.
At 3AM, I’m hooked watching his restorations! 🤦🏻♀️😂
Restoring objects is not only difficult but a risky thing to do because if you make a mistake there might not be a replacement... Great job! 👍
Your projects are amazing too, subbed
It's okay. He'll make a new one. :)
@@patxiplg Thank you! :)
@@redwitch12 Haha, that's true... 😂
except that he makes half the parts. not a resto.
You really have the knack of documenting fabulous videos of simply brilliant restorations. I particularly like the fact there is no soundtrack, just the sounds of engineering transformations. Top Class!
Honestly the best part of these videos is sand blasting!
Glad you like it :-)
@@mymechanics OML!! I didn't know that you would reply to my comment......I want to say that you are the youtuber who does the most satisfactory restoration😇 . Perfect restoration and perfect editing 👌
Watching this guy is free therapy.
These types of videos are oddly therapeutic aren't they? I love it
never even knew i watched these videos for that reasons glad i know now 🤣
😄 truth
I always wonder. Every little piece he does comes out as a piece of Art
Dude, that was amazing! Your skills are out of this world. We need people like you to teach the new generation trades like this.
100% True.
I think perhaps a series of classes , I would pay for it!
Never seen anybody take so much care to reproduce old parts to better than new like you do your amazing work is a pleasure to watch
This guy has all the tools to build a nuclear reactor but chooses to restore old lock!! 😄 Awesome video!!
My Mechanics next video: *Broken Radioactive Boron Fuel Control Rod with Missing RBMK Neuclear Reactor - Restoration*
This fuel rod was sent to me by one of my subscribers from Ukraine. Right when I saw the picture I knew I want to restore this fuel rod. All I needed to repair the fuel rod and the missing reactor was found in the Chernobyl Exclusion Zone. I am very happy with the end result even though my skin is peeling off and I'm vomiting blood.
He can steal the shop without key but he want to steal it with key
@@sampathsris Highly underrated comment.
Last time somebody built a nuclear reactor at home it didn't end that well...
Not everyone is trying to end the world
To be honest, the catchline for this channel should be: “I make new one” It fits the content really well
After all this fabulous work the lock maybe more valuable than the items it had protected before.
Behind every "I make a new one" there's a project we don't see and many times we don't even realize you did, therefore thank you, you're great!
Was fun to see that previous objects/tools are re-used to fix the new ones. And the resto was awesome. However, what amaze me the most, is that you knew EXACTLY what combo of teeth and holes needed to re-create a key that would work with this lock. I really don't understand how you knew this. To me, it's mindblowing!
Since he has access to the levers it's just a matter of putting them on a shaft and measuring the slots.
And it looked like the levers (or at least most of them) could be put back in whatever order he desired to key the lock.
Next time he will find old rusty key and will make a new padlock for it 😁
Lmao, that's exactly what I was thinking
LSHISMC!! (Laughing So Hard I Scared My Cat). Awesome!! :-)
LMFAO that's great 😂
LOL!!!
Key has no lock, I make new one!
I’d love to have LockPickingLawyer do a video explaining the mechanism of this lock
Be honest now...how many others were watching this at the beginning, thinking "ah c'mon, throw that away." That looked so hopeless! Kudos to you, man.
Every time I start watching one of these restoration videos, or the restoration of Tonka trucks and Matchbox cars, I always think “no way that _that_ be saved.”
I’m always happy to be proved wrong too.
omg that key part was AWESOME!! This has to be one of the most satisfying restorations in the history of humans.
These vids are always so a
satisfying to watch. I loooove watching old things revived like this👌
Als Elektromaschinenbauer diese Handwerkskunst zu sehen ist ein wahrer Genuss. Deine Detailgetreue ist überragend!
Last of a dying breed skill level superb hat’s off to you sir I love the process 👏🏾👏🏾👏🏾
Glad to hear that, thank you very much
The best restoration channel in YT. The others just don't do it right.
Burastaro II i agree
None of the others compare to the simple brilliance and obsession to detail.
what do you call restoration? ..
My Mechanics makes it hard to watch other restoration videos!
Totally agree with you. This is a problem because I don’t want to watch another restoration channel due to the lack of quality that my mechanics has.
“I can’t reuse these pins.”
Say it. Just say it
“I make new ones.”
God bless
And I love seeing the shear. It’s like seeing an old friend
exactly, just say it. :-D
I love how, even though it isn't actually being SAID, we all think the same thing. "Say it! Say it!"
@@shermanleeyh I was thinking this, too! Of the tools restored, I think it's awesome that shear is getting so much screen time. :D
The man with the most tools wins!
eu disse uma vez, volto a repetir, não é resgatar uma peça enferrujada, é recuperar uma historia...
parabéns👍 pelo seu talento
I really enjoyed watching this video. I love just watching the process.
Can we take a moment to appreciate the key he made!!! 💫
You are so kind
@@mymechanics - Your work/efforts are top notch!! It’s such a joy to watch your videos!! Thank you!! And happy restoring!! 😊💫
😄
steggy unfossilized Yes!! That key is so beautiful as we never gonna be
It's a work of art. So beautiful.
I need this guy to restore my will to live.
Well fucking done
I make a new one
He needs to restore my marriage. That’s the one thing he won’t be able to restore I am sure.
@@jortiz1451 he can make a new wife maybe if cant repair make new one
And me, too.
LUXURIOUS AND STYLISH the final work...
...a PIECE OF ART!!!
Thank You for the video!!!
🙏🙏🙏🙏
You are incredible! Your skills are way beyond anything I have seen.
Look forward to more videos.
Superb restoration.. Thanks for sharing
Talk about perfection! He doesn't even get his hands dirty!! Precise and beautiful craftsmanship!!
Thank you, I'm glad you like it :-)
your excellent videos remind me of why I liked metalwork so much at school!
Nice to hear that, thanks :-)
The Beverly Shear is there! my mechanicsverse is real!
I got excited when I saw that too!!!
Victor Holanda The MMRU. My Mechanics Restored Universe.
Interesting to watch the restoration but creating the key truly demonstrates your skills.
Truly a master craftsman
People who know how to do this are extremely rare
Those other restoration channels are not on this guy's level. This guy is incredible.
What I love the most is how you make everything you restore like a valuable piece of art that you would never want to ruin, even something as simple as a padlock which is an everyday object to most, when you restore it I would never want to use it because it looks that gorgeous and pristine, you're not just a restorer, you're an artist as well 😊
It all comes down to the touch of the masters hand.
some of the things he restored he uses in his shop
@@howtoavenge1016 Such as the vise used in this video. I just watched that one last night and thought, "hey, that looks really familiar!" Also, there's the Beverly Shear that's from another previous video. Likely some other stuff in here, too, but I haven't watched all of these yet.
As always, beautiful work!
Lets see you bump set this sucker!
Thank you very much
BTW, How would you pick a lock lick that?
I knew you would be in the comments!
Where’s the other lock picking guys at?
Не увидела бы, не поверила😲потрясающая работа👍🙏
That was absolutely brilliant putting a brass stud in the hole before welding to prevent the bead from filling in the hole you want to keep.
Thank you very much, I'm glad you like it :-)
I'm sure this lock never looked this good when it was new.
I'm sure you're right
Great job but making the key was even better
Even the "unknown" shape of the hand hold is perfect!
Key was not there
I make a new one
La k 😂😘☎️ @jlucasound 📞❔🚫 h ☎️🔌☎️0 😭😂😘😀
Not only are your restoration skills second to none but your camera work and editing are unreal.
I have to say I love every bit of your videos, especially how you respect our time and edit them to a reasonable length.
My favorite parts are often when you make new hardware, pins, rivets, screws, bolts, nuts, etc. It speaks to the artistry needed to do these restorations justice. And all work on a lathe is satisfying to watch. Great work, thank you!🥰
Erdem Furkan Ömer Faruk Çelik merhaba da bir şey yok aslında
I agree, I like that he respects my time.
@@ksmetbyk2178 😎😎😎😎😒😎😇😇😇😇😇😇😇😇😇😇😇🥰🥰🥰🥰🥰🥰🥰🥰🥰😅😅😅😅
If there is one thing I've learned from this channel, it's that only amateurs leave square edges
The thing is to know, where you should keep them (; But somehow it's purely aestethic thing. I like this final touch, that clearly shows each part has been done with great amount of patience and care.
Fantastic job done. Restored better than a new one. The set of machines u own are jus incredible. Only one thing key should have been made into a set of two, I personally feel.
New Tesla Truck.... Am I A Joke To U ? lol
it would be nice to see a video where he tells us a little about his workshop and about what made he get each of his tools.
Agree 👍🏻
I'd like to see any bloopers or mistakes he's made.
Amazing ! So nice to even watch. Just imagine the pleasure of actually restoring such things ! Just beautiful results !
The original designers and manufacturers wish their tools looked as good as yours turn out! Excellent!
Thank you very much!
Next episode
: this old car key is missing the actual car. I will make it.
Fabulous. 👍🤣👍
انسم
*Snaps and summons a car* BOOM!
XD
@Paul Mall nah finds small piece of plastic in yard i bet this was from a space ship ill make a new one
Is there anything in the world more satisfying than media blasting old rusty stuff?
When I first saw your videos, I thought that you had mad skills, now I correct myself, you have serious mad skills. And give you the well sought after yet seldom given golf clap 👏
Many thanks :-)
I completely missed the part where you determined how to make the key. But I can't get enough of these restoration videos. Keep up the great work.
Й
He didn't show it. Long story short, this is a lever lock. The levers are different sizes and they block the unlocking mechanism. However, there is a groove in each of the levers. (Called a gate) When the gates of all the levers are aligned, the unlocking mechanism can pass through those gates and unlock the lock. So if you measure the levers, you can figure out how much the key needs to move each lever in order to align the gates. That's how tall the parts of the key need to be. (Which is called the key's bitting)
For some reason, the parts washer is my favorite part of these restorations.
Also when you use tools you previously restored to help on your current project.
The machine work is what is most satisfying to me. :-)
Someone buy this man a new left-handed sandblasting glove!
Ben D. I'm sure he can afford his own
He will make a new one
@@nevious1982
The on and only answer 👍
He won’t wear it !!!
THIS BLEW MY MIND. ANOTHER LEVEL OF SKILL.
At first I wasn’t going to watch this one. It looked dull & simplistic in the thumbnail. But was I ever wrong.
Watching you craft that key was a real eye opener. The mechanical precision was really fascinating. Thank you. 💕❤️💕
Думаю, на данный момент, один из интереснейших проектов. красивый замок получился.
Тут нет ему равных. Просматриваю других реставраторов только для того чтоб сравнить. И в который раз убеждаюсь в этом
@@RuslanMadjidov После этого канала не могу смотреть других реставраторов. Такого перфекционизма как тут нет нигде.
Особенно если учесть, сколько вывалилось трухи и как была изъедена эта хрупкая вещь ржавчиной.
@@meliilosona5272 после того как он разобрал замок и вытряхнул почти все детали в виде мусора, я думал он замок этот в мусорку выкинет и на этом видео закончится
Однозначно лучше его не найти! Перфекционизм зашкаливает и это отлично!
I thought this one was going to be an easy one, but I was easily fooled.
Once again, it is so fantastic to watch how you "solve" the problems as they arise.
I could only dream of having your tools... but the learning process is what matters to me. ♥♥♥♥♥
For most of us if we were handed some of these restorations that he undertakes, we would just toss them, as we wouldn't to spend the time and effort that it would take. He's amazing.
Beautiful work! Thanks for posting! Cheers!😀👍🛠️🔧
I don't know why but this is my all time favorite video of yours. I watch it often
There are a lot of interesting UA-cam channels out there, but for me this is the one that is the most "labor of love". I mean, that piece of stock he used for the key cost more than a huge, new padlock by itself.
send it to the lockpickinglawyer
Saw the title and immediately had "This is the Lockpicking Lawyer and that's all I have for you today" going through my head.
It wouldn't even last 2 seconds unfortunately
@@RhiannonSmudge I still think he would enjoy it
@@danielgibbons301 true
The 1st thing that came to mind 😎
Can we just address the fact that this guy MACHINED and THREADED a piece of metal just to straighten it out!?!?!? Mad props to the dude.
With all the restorations you've done, the lock would have to be the most intricate.
It took me a minute to realize it's the journey, not the result. It's the shear joy of bringing back the past. Now I get it. Thumbs up!